• Food Science and Preservation
• /
• v.30 no.5
• /
• pp.896-904
• /
• 2023

The texturization characteristics of textured vegetable protein (TVP) were investigated based on the extent of soybean decoating during the pretreatment of defatted soybean flour used for TVP. The raw materials for TVP consisted of 50% defatted soybean flour, 30% gluten, and 20% corn starch. The weight ratios of soybean seed coat to soybean flour were 9%, 6%, 3%, and zero. Extrusion was performed using an extruder equipped with a cooling die, maintaining a barrel temperature of 190℃ and screw speed of 250 rpm, Water was injected at a rate of 9 rpm using a metering pump. Regarding the textures of the extruded TVPs produced from defatted soybean flour, an increase in the soybean seed coat content led to a decrease in the apparent fibrous structural layer and an increase in hardness. However, there were no significant changes in elasticity and cohesion. Moreover, as the soybean seed coat content increased, the pH of TVPs decreased. A higher soybean seed coat content also tended to lower the moisture content, increasing water absorption, solids elution, and turbidity. These results suggest that an increased seed coat content reduces the proportion of protein, and the fibers present in the seed coats prevent texturization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.77-80
• /
• 2001

Crystallographic and magnetic characteristics of CoCr-based magnetic thin film for perpendicular magnetic recording media were influenced on preparing conditions. In these, there is that substrate temperature was parameter that increases perpendicular coercivity of CoCrTa magnetic layer using recording layer. While preparation of CoCr-based doublelayer, by optimizing substrate temperature, we expect to increase perpendicular anisotropy of CoCr magnetic layer and prepare ferromagnetic recording layer with a good quality by epitaxial growth. CoCrTa/Si doublelayer showed a good dispersion angle of c-axis orientation $\Delta\theta_{50}$ caused by inserting amorphous Si underlayer which prepared at underlayer substrate temperature 250C. Perpendicular coercivity was constant, in-plane coercivity was controlled a low value about 200Oe. This result implied that Si underlayer could restrain growth of initial layer of CoCrTa thin film, which showed bad magnetic properties effectively without participating magnetization patterns of magnetic layer. In case of CoCrTa/Si that prepared with ultra thin underlayer, crystalline orientation of CoCrTa was improved rather underlayer thickness 1nm, it was expected that amorphous Si layer played a important role in not only underlayer but also seed layer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.180-181
• /
• 2006

As a rule, high temperature superconducting coated conductors have multi-layered buffers consisting of seed, diffusion barrier and cap layers. Multi-buffer layer deposition requires longer fabrication time. This is one of main reasons which increases fabrication cost Thus, single buffer layer deposition seems to be important for practical coated conductor process. In this study, a single layered buffer deposition of $CeO_2$ for low cost coated conductors has been tried using thermal evaporation technique 100nm-thick $CeO_2$ layers deposited by thermal evaporation were found to act as a diffusion layer. $0.4{\mu}m$-thick SmBCO superconducting layers were deposited by thermal co-evaporation on the $CeO_2$ buffered Ni-W substrate. Critical current of 118A/$cm^2$ was obtained for the SmBCO coated conductors.

• Journal of Surface Science and Engineering
• /
• v.40 no.1
• /
• pp.6-10
• /
• 2007

For low-emissivity application on window glass, coalescence of thin film silver islands is crucial for high transmittance in the visible and high reflectance in the infrared. It is well known that the underlayer affects the growth mode. In this work, the effect of the underlayer on the growth of silver films deposited by filtered cathodic vacuum arc is discussed. While a nominal 0.1 nm niobium underlayer has promoted the coalescence of silver islands, a 0.2 nm layer did not show these features. From a thermodynamic approach, Nb seeding less one monolayer is considered to reduce the surface energy between the silver atoms and $Nb/TiO_2$ surface, resulting the change of its growth from 3D islands to 2D-layer modes. If the seed layer exceeds one monolayer, however, a rougher surface is formed because the surface energy of Nb itself is superior to that of $Nb-TiO_2$. The onset of silver layer on the roughened Nb surface is required more silver.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.687-694
• /
• 1994

Heteroepitaxial InP/GaAs layers were grown using the selective liquid phase epitaxy (SLPE) technique. It was observed that the optimum LPE conditions were $660^{\circ}C$ growth temperature, $5^{\circ}C$ supercooling, and $0.4^{\circ}C$/min cooling rate. Maximum expitaxial layer overgrowth (ELO) of 110-160$\mu \textrm{m}$ was obtained when the seed was aligned along (112) orientation. Initial melt-back of the substrate was observed but limited to the seed region so that flat In-Ga-As-P layers were grpwn throughout the GaAs substrates. The InP/GaAs heteroepitaxial structure could be obtained by growing an additional InP layer on top of the In-Ga-As-P layer.

• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.282-289
• /
• 2000

$PbTiO_3$ films were fabricated by electron cyclotron resonance plasma enhanced chemical vapor deposition(ECR-PECVD). Deposition characteristics of $PbTiO_3$films on $RuO_2$ and Pt substrates were investigated with varying the flow rate of metalorganic source and substrate temperature. The residence time of Pb-oxide molecules in much longer on $RuO_2$ than on Pt substrate, while the perovskite nucleation is more difficult on $RuO_2$ than on Pt substrate. Therefore, the process conditions to obtain the single perovskite $PbTiO_3$ phase are more restricted on $RuO_2$ than on Pt substrates. An introduction of Ti-oxide seed layer increases perovskite nucleation density and thus enlarges the process window to obtain the single perovkite phase. The introduction of Ti-oxide seed layer make the PZT film that Ti-components of $PbTiO_3$ are partially substituted with Zr atoms have single perovskite phase for the wide range of Zr/(Zr+Ti) concentration ratios.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.433-433
• /
• 2009

ZnO-based materials have been extensively studied for optoelectronic applications due to their superiors physical properties such as wide direct bandgap (~3.37 eV), large exciton binding energy (~60 meV), high transparency in the visible region, and low cost. Especially, one-dimensional (1D) ZnO nanostructures have attracted considerable attention owing to quantum confinement effect and high crystalline quality. Additionally, various nanostructures of ZnO such as nanorods, nanowires, nanoflower, and nanotubes have stimulated the interests because of their semiconducting. and piezoelectric properties. Among them, vertically aligned ZnO nanorods can bring the improved performance in various promising photoelectric fields including piezo-nanogenerators, UV lasers, dye sensitized solar cells, and photo-catalysis. In this work, we studied the effect of the annealing temperature of homo seed layers on the formation of ZnO nanorods grown by hydrothermal method. The effect of annealing temperature of seed layer on the length and orientation of the nanorods was investigated scanning electron microscopy investigation. Transmission electron microscopy and X-ray diffraction measurement were performed to understand the effect of annealing temperatures of seed layers on the formation of nanorods. Moreover, the optical properties of the seed layers and the nanorods were studied by room temperature photoluminescence.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.2
• /
• pp.53-61
• /
• 1999

This study was conducted to determine the optimal collecting time and methods of utilization of forest topsoil as a seed-bank source for revegetation materials of slopes. From April to November of 1998, nursery seedbeds in the greenhouse of Seoul National University were seeded with mixtures of forest topsoil and seeds. The nursery seedbeds were treated to evaluate the effect of depths of forest topsoil and seeding amounts. Seasonal experiments with $3{\times}3$ factorial design were conducted in April, June and August. More than 40 seedlings/$m^2$ were observed as the naturally-emerged species in the plot, treated with the top-layer forest soil within the depth of 10cm. However, it was found, as seeding more seeds, the number of appearance of the naturally-emerged species reduced because of the heavy competition between the seeded and the naturally-emerged. According to the results of this research, it is recommended that seeding amount should be no more than 1,000 seeds/$m^2$ to avoid the severe competition. Also it was observed that the forest topsoil collected in spring(April) is better than that collected in summer. The more species of the naturally-emerged were found in the forest topsoil collected in spring. Forest-topsoil-mixed-materials as a seed-bank source could significantly increase the plant diversity and productivity. Effective use of forest topsoil as a seed-bank source may become a valuable tool in future restoration of disturbed slopes for promoting plant community diversity and recycling of spoiled-soils from the slopes.

• Food Science of Animal Resources
• /
• v.36 no.4
• /
• pp.476-486
• /
• 2016

This study investigated the effect of the powder produced by ball-milling the outer layer of annatto (Bixa orellana L.) seeds on the physicochemical properties as well as the antioxidant and antimicrobial activities of pork patties over 14 d of refrigerated storage (4±1℃). Five pork patty treatments were produced containing three different concentrations of annatto seeds, 0.1, 0.25 and 0.5% (ANT0.1, ANT0.25, ANT0.5), 0.1% ascorbic acid (AA0.1), and a control (CTL). Based on the results, annatto seed powder appeared to show antioxidant activity. The Hunter color values of pork patties were affected by the addition of annatto seed powder, which increased the redness and yellowness values, but decreased the lightness of the patties (p<0.05). To evaluate the antioxidative effects of annatto on pork patties, thiobarbituric acid reactive substances (TBARS) and peroxide values (POV) were analyzed over 14 d of refrigerated storage. Treatments containing annatto seed showed lower TBARS and POV than control (CTL) samples (p<0.05). The volatile basic nitrogen (VBN) of the pork patties containing annatto seeds were lower than that of CTL at the end of storage (p<0.05). Although no differences in total bacterial counts were observed between control and treated patties, those containing annatto seeds had lower microbial counts for Enterobacteriacease than CTL or AA 0.1%. Therefore, annatto seed powder might be a good source of natural antioxidants for the production of meat products.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.1
• /
• pp.19-24
• /
• 2004

Germination and emergence habits of Chinese milk vetch (CMV) were examined to obtain the basic information for the effect of environmental conditions and cultural practices on the seedling density. Seed germination tests with different water potentials, temperatures, and soil and water depths showed the environmental effects on the characters related to seed germination in CMV. Imbibition under different temperatures reflects that initial velocity was rapid at higher temperature, however, the times to full imbibition were not different between 15 and $25^{\circ}$. The optimal germination temperature for CMV germination was ranged from 15 to 20 and the germination was highly affected by water potential of media at relatively high temperature above $20^{\circ}$. When the seeds were sown in flooded condition the germination was not proportionally affected by water depth. In addition, there was no correlation between water depth and oxygen concentration. The germination of seeds flooded by 2cm water depth were poorly germinated compared to other depths. Results indicated that the germination of submerged seeds was more highly influenced by flooding depth than the temperature, it was also affected more strongly at 10 than $20^{\circ}$. Emergence of CMV depending on the thickness of covered soil was poor when the soil layer was greater than 5cm. In the experiment with seeds collected between 22 days after flowering (OAF) and 52 DAF, the highest germination ability of CMV seeds was observed at 39 DAF and germinability was decreased subsequently as seeds became mature. The lower germinability may be due to the enhanced seed dormancy.