• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.173-176
• /
• 2014

We have investigated the seed layer formation of front side contact using the inkjet printing process. Conductive silver ink was printed on textured Si wafers with 80 nm thick $SiN_x$ anti reflection coating (ARC) layers and thickened by light induced plating (LIP). The inkjet printable sliver inks were specifically formulated for inkjet printing on these substrates. Also, a novel method to prepare nano-sized glass frits by the sol-gel process with particle sizes around 5 nm is presented. Furthermore, dispersion stability of the formulated ink was measured using a Turbiscan. By implementing these glass frits, it was found that a continuous and uniform seed layer with a line width of $40{\mu}m$ could be formed by a inkjet printing process. We also investigated the contact resistance between the front contact and emitter using the transfer length model (TLM). On an emitter with the sheet resistance of $60{\Omega}/sq$, a specific contact resistance (${\rho}_c$) below $10m{\Omega}{\cdot}cm^2$ could be achieved at a peak firing temperature around $700^{\circ}C$. In addition, the correlation between the contact resistance and interface microstructures were studied using scanning electron microscopy (SEM). We found that the added glass particles act as a very effective fire through agent, and Ag crystallites are formed along the interface glass layer.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.4
• /
• pp.63-69
• /
• 2007

We investigated interconnection processes using Cu vias for MEMS sensor packages. Ag paste layer was formed on a glass substrate and used as a seed layer for electrodeposition of Cu vias after bonding a Si substrate with through-via holes. With applying electrodeposition current densities of $20mA/cm^2\;and\;30mA/cm^2$ at direct current mode to the Ag paste seed-layer, Cu vias of $200{\mu}m$ diameter and $350{\mu}m$ depth were formed successfully without electrodeposition defects. Interconnection processes for MEMS sensor packages could be accomplished with Ti/Cu/Ti line formation, Au pad electrodeposition, Sn solder electrodeposition and reflow process on the Si substrate where Cu vias were formed by Cu electrodeposition into through-via holes.

• Journal of Plant Biology
• /
• v.35 no.1
• /
• pp.53-60
• /
• 1992

This study has been carried out to investigate the ultrastructural changes in the associated with the disintegration of the storage materials in endosperm cell of ginseng (Panax ginseng C.A. Meyer) seed during after-ripening with light and electron microscope. The protein body of endosperm cells near the umbiliform layer showed various degenerative patterns, and so electron density of proteinaceous matrix was gradualJy decreased during afterripening. These results indicate that the decomposition of endosperm was already initiated during after-ripening. As the degeneration of endosperm was more progressed after the dehiscence of seed, non-decomposed part of protein body appeared amorphously with high electron density. Decomposed protein bodies were vacuolized with the loss of their matrix and gradually expanded by fusion. Also, spherosomes were gradually dissolved with the lowered electron density during the degeneration of endosperm. The vesicles of dictyosomes near the cell wall are observed in endosperm contacting with umbiliform layer and are fused with plasma membrane. Umbiliform layer which was the complex of the decomposed remnants of lysis and materials has strong stainability for toluidine blue and basic fuchsin.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.684-689
• /
• 2019

Single crystals, which have complexed composition, are fabricated by solid state grain growth. However, it is hard to achieve stable properties in a single crystal due to trapped pores. Aerosol deposition (AD) is suitable for fabrication of single crystals with stable properties because this process can make a high density coating layer. Because of their unique features (nano sized grains, stress inner site), it is hard to fabricate single crystals, and so studies of grain growth behavior of AD film are essential. In this study, a $BaTiO_3$ coating layer with ${\sim}9{\mu}m$ thickness is fabricated using an aerosol deposition method on (100) and (110) cut $SrTiO_3$ single crystal substrates, which are adopted as seeds for grain growth. Each specimen is heat-treated at various conditions (900, 1,100, and $1,300^{\circ}C$ for 5 h). $BaTiO_3$ layer shows different growth behavior and X-ray diffraction depending on cutting direction of $SrTiO_3$ seed. Rectangular pillars at $SrTiO_3$ (100) and laminating thin plates at $SrTiO_3$ (110), respectively, are observed.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.403-411
• /
• 1994

To isolate, purity and identify of bioactive compounds involved in alfalfa allelopathy and/or autotoxicity, experiment was conducted. Isolation and separation procedures used from an 80% methanol extract of fresh alfalfa leaves(1kg), silica gel thin layer chromatography(TLC), followed by Droplet Counter Current Chromatography(DCCC). Preliminary identification was examined by high preformance lipid chromatography(HPLC). Four phenolic compound, salicylic acid, scopoletin, rutin, and quercetin, were identified and identified all compounds were phytotoxic to alfalfa seed germination and seedling growth. Among these compounds, quercetin treatment($10^{-3}M$) was most inhibitory to alfalfa seed germination and seedling growth. These compounds may be, at least in part, involved autotoxicity and allelopathy.

• Applied Microscopy
• /
• v.25 no.4
• /
• pp.71-82
• /
• 1995

The ultrastructure and storage reserves of the Capsicum annuum seeds were studied in order to identify structure and to localize storage components in the endosperm using light microscopy, scanning and transmission electron microscopy. The seed coat was composed of one cell layer which contained a large number of lipid bodies, while most of the endosperm cells did not showed many lipid bodies. During seed maturation, the endosperm cells were continuously degenerated by the autophagy. Various types of plastids were also distinguished in the endosperm cells. They contained starch grains surrounded by electron-dense tiny particles, plastoglobuli, and vasicular bodies.

• YAKHAK HOEJI
• /
• v.22 no.2
• /
• pp.87-90
• /
• 1978

"Bija"(Torreya nut), a tree belonging to the Torreyaceae family, is cultivated in Jae Joo Do and Jun Ra Do, Korea. The seed of Torreya nucifera, which has been widely used as folkmedicine in the treatment of tapeworm infestation, was examined on the sterol composition determined by gas liquid chromatography and thin layer chromatography on the preparative plates. Sterols were obtained from the nonsaponifiable matters of ether extract of the seed. It was noted that .betha.-sitosterol was the major sterol in the nut. The results showed that contents of sterols were campesterol 3.15-3.75%, stigmasterol 5.38-5.67%, $\beta$-sitosterol 85.61-86.28% and ${\delta}^{7}$-sterol 4.91-5.19% by gas liquid chromatography.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.171-172
• /
• 2009

TSV(through via silicon)를 이용한 Via의 Cu 충전에서 Seed 층의 역할은 전류의 흐름을 가능하게 하는 중요한 역할을 하고 있다. Via에 각각 Ti/Au, Ti/Cu를 증착한 후 Ti/Cu가 Ti/Au를 대체 할 수 있는지를 알아보기 위해 먼저 실리콘 웨이퍼에 via를 형성하고, 형성된 via에 기능성 박막층으로 절연층(SiO2) 및 시드층을 형성하였다. 전해도금을 이용하여 Cu를 충전한 결과 Ti/Au 및 Ti/Cu를 증착한 두 시편 모두 via와 seed층 접합면에 박리 등의 결함이 없었고, via 내부 또한 void나 seam 등이 관찰되지 않고 우수하게 충전된 것을 확인할 수 있었다.

• Korean Journal of Plant Taxonomy
• /
• v.47 no.2
• /
• pp.137-153
• /
• 2017

Fruit and seed morphological characteristics were investigated in 36 taxa of 20 genera of Korean Ranunculaceae. As a result, fruits were classified as the achene, berry, or follicle type. In the taxa with achene, the presence of trichomes and stoma on the surface of the fruit and a feature in which the endocarp distinctively develops into a one-layer sclereid were considered as useful characteristics. Moreover, in the taxa with follicles, the composition of the seed coat (bitegmic vs. unitegmic), the cell shape of the seed coat, the presence of trichomes, and the type of seed coat were useful for taxonomic characteristics in Korean Ranunculaceae. Based on the fruit and seed characteristics, Adonis is likely to be classified into Helleboroideae rather than Ranunculoideae, as it has bitegmic ovules. In addition, Enemion is similar to Eranthis in unitegmic ovule and the seed coat structure which has non-sclereid exotesta; therefore, it is reasonable to be placed in Helleboroideae. According to the results of this study, more in-depth research is needed regarding the taxonomic positions of Callianthemum and Actaea, which has the only berry fruit type.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.58-65
• /
• 2014

This study aims to understand the environmental impact reduction of green buildings that are certified by Green standard for energy and environmental design(G-SEED). To ensure this end, this study assessed and compared the environmental impacts(global warning, ozone layer depletion, acidification, and eutrophication) of a G-SEED-certified elementary school building(green building) and an uncertified elementary school building(traditional building) using the life cycle assessment methodology. This study considered the environmental impacts from the material manufacturing, material transportation, on-site construction, and operation during 40 years. The comparison of the environmental impact intensity of two buildings showed that the green building generated much more environmental impacts than the traditional building. For example, the global warming potential of the green building was approximately 12.5% higher than of the traditional building since the global warming potential of the green building was 3.751 $t-CO_2eq./m^2$ while that of the traditional building was 3.282 $t-CO_2eq./m^2$. It signifies that the G-SEED doesn't guarantee the reduction of the environmental impacts in terms of four impact categories. Therefore, the G-SEED should be complemented and improved to achieve the environmental impact reduction.