• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.363-370
• /
• 2023

Various earth observation satellites need to provide accurate and high-quality data after launch. To maintain and enhance the quality of satellite data, it is crucial to employ a cross-calibration process that accounts for differences in sensor characteristics, such as the spectral band adjustment factor (SBAF). In this study, we utilized Landsat-8 and Sentinel-2A satellite imagery collected from desert sites in Libya4, Algeria3, and Mauritania2 among pseudo-invariant calibration sites to calculate and apply SBAF, thereby compensating the uncertainties arising from variations in bandwidths. We quantitatively compared the reflectance differences based on the similarity of bandwidths, including Blue, Green, Red, and both the near-infrared (NIR) narrow, and NIR bands of Sentinel-2A. Following the application of SBAF, significant results with reflectance differences of approximately 1% or less were observed for all bands except NIR. In the case of the Sentinel-2A NIR band, it exhibited a significantly larger bandwidth difference compared to the NIR narrow band. However, after applying SBAF, the reflectance difference fell within the acceptable error range (5%) of 1-2%. It indicates that SBAF can be applied even when there is a substantial difference in the bandwidths of the two sensors, particularly in situations where satellite utilization is limited. Therefore, it was determined that SBAF could be applied even when the bandwidth difference between the two sensors is large in a situation where satellite utilization is limited. It is expected to be helpful in research utilizing the quality and continuity of satellite data.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.85-92
• /
• 2015

The experiment was conducted to evaluate rice growth and yield as affected by different coating and covering materials such as a iron, silicate, iron and silicate mixture of rice seeds in farmer's rice growing field. The tiller number was 36.7 at iron-coated seeds, 32.8 at silicate-covered seeds, 30.3 at iron and silicate mixture coated seeds and 30.2 at untreated control in 44days after seeding. The seedling height was 38.2cm of iron and silicate mixture, 37.7cm of untreated control, 36cm of iron-coated and 35.7cm of silicate covered seeds in 43days after seeding. At 75days after seeding rice tiller number was 153 of iron-coated seeds, 152 of silicate-covered seeds, 147 of untreated seeds and 141 of iron and silicate mixture-coated seeds and also there were different plant height growth of 87.4cm in silicate-covered seeds, 85.7cm in iron and silicate mixture, 85.4cm in untreated control and 83.0cm in iron-coated seeds. The panicle length was of 21.0cm in iron and silicate mixture coated seeds, 20.8cm in silicate covered seeds, 20.7cm in untreated control seeds and 20.6cm in iron-coated seeds. The panicle number was 464 at iron-coated seeds, 404 at untreated control seeds, 427 at silicate-covered seeds and 412 at iron and silicate mixture coated seeds. The spikelet number per m² was of 32,503 in iron-coated seeds, 31,813 in silicate-covered seeds, 29,646 in untreated control, 28,896 in iron and silicate mixture coated seeds. The ripened ratio of rice grain was of 94.5% at iron-coated seeds, 93.9% at iron and silicate mixture coated seeds, 93.6% at silicate covered seeds and 93.2% at untreated control seeds. The rice yield was of 591kg/10a at iron-coated seeds, 580kg/10a at silicate-covered seeds, 571kg/10a at iron and silicate mixture-coated seeds and 539kg/10a at untreated control.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.70-79
• /
• 2002

This study was conducted to determine correlations and combining abilities of leaf lengths, leaf widths, petiole lengths, number of branches, number of leaves, leaf areas, fresh weights, dry weights and number of flowers in F₁ crosses made with the partial seven-parent diallel cross in Viola tricolor. Leaf lengths and leaf widths showed highly positive correlation with petiole length and negative correlation with number of branches, number of leaves and number of flowers. There was positive correlation between the number of leaves and flowers as well as between leaf area and fresh weight. Mean squares of general combining ability(GCA) and specific combining ability(SCA) were highly significant for all the parameters. Variance component values of SCA were greater than those of GCA for all the parameters except leaf length, implying preponderance of non-additive gene actions for these characters. The lines C and G for leaf lengths and widths, the lines A and F for number of leaves, the lines A, B and G for leaf areas, and the lines B and F for number of flowers showed relatively high GCA effects. The crosses of A×B and B×D exhibited high SCA effects on increasing leaf lengths, leaf widths, number of leaves, fresh weights and number of flowers. And also the crosses of B×E and D×G exhibited high SCA effects on decreasing leaf lengths, leaf areas and fresh weights as well as increasing number of flowers. The broad sense heritabilities of most characters were high compared with the narrow sense one. Those of leaf length, leaf width, petiole length and number of leaves were high in both the broad and narrow sense heritabilities.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.94-103
• /
• 2023

Cyanobacterial resting cells, such as akinetes, are important seed cells for cyanobacteria's early development and bloom. Due to their importance, various methods have been attempted to isolate resting cells present in the sediment. Ludox is a solution mainly used for cell separation in marine sediments, but finding an accurate method for use in freshwater is difficult. This study compared the two most commonly used Ludox methods (direct sediment treatment and sediment distilled water suspension treatment). Furthermore, we proposed a highly efficient method for isolating cyanobacterial resting cells and eDNA amplification from freshwater sediments. Most of the resting cells found in the sediment were akinete to the Nostocale and were similar to those of Dolichospermum, Cylindrospermum, and Aphanizomenon. Twenty times more akinetes were found in the conical tube column using the sediment that had no treatment than in the sample treated by suspending the sediment in distilled water. Akinete separated through Ludox were mainly spread over the upper and lower layers in the column rather than concentrated at a specific depth in the column layer. The mibC, Geo, and 16S rDNA genes were successfully amplified using the sediment directly in the sample. However, the amplification products of all genes were not found in the sample in which the sediment was suspended in distilled water. Therefore, 5 g to 10 g of sediment is used without pretreatment when isolating cyanobacterial resting cells from freshwater sediment. Cell isolation and gene amplification efficiency are high when four times the volume of Ludox is added. The Ludox treatment method presented in this study isolates cyanobacterial resting cells in freshwater sediment, and the same efficiency may not appear in other biotas. Therefore, to apply Ludox to the separation of other biotas, it is necessary to conduct a pre-experiment to determine the sediment pretreatment method and the water layer where the target organism exists.

• Korean Journal of Plant Resources
• /
• v.36 no.4
• /
• pp.413-434
• /
• 2023

Sesame (Sesamum indicum L.) is an ancient oilseed crop, which is usually cultivated for its seeds. Sesame breeding aims to achieve high seed yield and quality, along with resistance to biotic or abiotic stresses. It is estimated that sesame is originated from Asia or Africa continent. In this study, we characterized 10 agronomic traits and evaluated lignan contents in 165 sesame germplasm originated from Asia or Africa, to select high-yield or high-lignan content accessions. Sesame germplasm showed diverse phenotypes and highly variable lignan contents (sesamin: 0.5-12.6 mg/g, sesamolin: 0.1-3.5 mg/g, lignan: 1.1-16.1 mg/g). Based on originated continent, there are significant difference in agronomic traits, but no in lignan content. Correlation analysis revealed that yield-related agronomic traits were negatively related with lignan contents. Also, PCA analysis showed that most agronomic traits and lignan contents were principal components explaining diversity of whole sesame germplasm. Sesame germplasm was clustered into three groups based on agronomic traits and lignan contents. Finally, we selected high-yield (IT29416, IT167042, K276848, K276849) and high-lignan candidate accessions (IT169254, IT170031, IT169250, IT154876, IT170034), respectively. These accessions are expected to be valuable resources for breeding of high-yield and high-lignan contents functional cultivars.

• Korean Journal of Plant Resources
• /
• v.36 no.4
• /
• pp.402-412
• /
• 2023

Peucedanum japonicum Thunberg is a biennial plant that usually flowers and dies after seed setting at 2^nd year. We inspected the flowering and fertilization characteristics to establish the breeding system. The plant forms complex umbel inflorescences consisting of multiple umbellets and numerous flowers. Each flower is bisexual but allogamous because of protandry. A flower bloomed for three days with matured pollen and no stigma appearance. Inspection of pollen tube growth indicates that the pollen viability can be maintained for up to 3~7 days after first flowering (DAF). In a umbellet, flowers bloomed during 1~5 DAF and the pollen maintained viability during 3~10 DAF, and the pistil developed and maintained fertility during 8~12 DAF. Theoretically, self-pollination can be possible during 8~10 DAF in the same umbellet. Approximately 4.4% of seeds were developed by self-pollination among flowers in an enveloping solitary umbel. There is at least a 9~10 days difference for the development of an umbel with another umbel at the next branch, which indicates pollination can be permitted between different branches in an individual plant. Finally, we have established a rapid breeding method to shorten the breeding cycle to one year from two years by integrating the flowering and pollination characteristics.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2019

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods after Italian Ryegrass Harvest The required time for seed emergence was for 7 ~ 8days in the tested direct seeding methods and there was high in seedling establishment in order of wet hill-seeding with iron-coated seeds > water seeding with iron-coated seeds > wet hill-seeding with soil coverage with pregerminated seeds. The rice plant height was shorter in the tested direct seeding methods than that of machine transplanting until 45day after seeding but there was not significant difference in terms of statistical analysis at 63day after seeding. The growth of tiller number in the rice plant was high in water seeding with iron-coated seeds and wet hill-seeding with soil coverage and low in wet hill-seeding with iron-coated seeds compared to machine transplanting. The yield component in the tested direct seeding methods was not significant difference in terms of statistical analysis. The milled rice yield in the tested direct seeding methods was higher 2 ~ 8% being with 4.94 ~ 5.24t/ha than that of machine transplanting but there was not significant difference in terms of statistical analysis. The percentage of head rice was low in the tested direct seeding methods compared to machine transplanting. The weedy rice was not occurred in the tested rice cultivation methods. In conclusion the direct seeding method would be recommended to be a suitable to in following by Italian ryegrass harvesting in southern area of Korea in terms of reduction in production cost and high income basis for rice growing farmers.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.5-18
• /
• 2018

The field trial was performed to evaluate the rice growth and yield in direct seeding cultivation with iron-coated rice seeds. The required time for seed emergence was for 9~11days in the tested direct seeding methods. That was 1~2days earlier in direct seeding with pregerminated seeds than that of direct seeding with iron-coated seeds. The seedling establishment was highest in water seeding with iron-coated seeds but there was not significant difference in terms of statistical analysis. The rice plant height was taller in water seeding with broadcasting method than that of wet hill-seeding methods and in direct seeding with iron-coated seeds than that of direct seeding with pregerminated seeds. The tiller number in the rice plant was the highest in machine transplanting at 30days after direct seeding(June 17) and in water seeding with iron-coated seeds at 45days after seeding(DAS) and 60DAS. The tiller number of 75 and 90DAS in the tested rice cultivation methods being with 352~405/m² was not significantly different in terms of statistical analysis. The heading time was not different in rice direct seeding methods but 2 day earlier in direct seeding with iron-coated seeds than that of direct seeding with pregerminated seeds. The culm length was the highest in water seeding with iron-coated seeds and the panicle length was the longest in wet hill-seeding with pregerminated seeds. The panicle number per m² was highest in water seeding with iron-coated seeds but not significant difference among the tested rice cultivation methods. The water seeding with iron-coated seeds resulted in the highest spikelet number per m² and the heaviest grain weight of brown rice. Percentage of ripened kernel was the highest in wet hill-seeding with iron-coated seeds. But there were not significant among the tested rice cultivation methods. The milled rice yield in direct seeding methods was 3~21% higher than that in machine transplanting. Water seeding with iron-coated seeds recorded the highest milled rice yield being with 6.86t/ha.The occurrence of sheath blight was high according to machine transplanting>wet hill-seeding>water seeding. Weed occurrence was the highest in water seeding with pregerminated seeds. Weedy rice occurred not in machine transplanting but occured 0.6~0.7% in direct seeding methods with pregerminated seeds and 0.1% in direct seeding with iron-coated seeds.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.35-47
• /
• 2018

A edible mushroom, Clitocybe maxima (Lentinus giganteusis) commercially cultivated in China and Taiwan. However, the researches of cultivation and cultural characteristics were not reported in Korea. In this study, we conducted on cultural characteristics and artificial cultivation of C. maxima. Six isolates were collected from China(3 isolates, commercial strain), Taiwan(1 isolate, commercial strain) and Korea(2 isolates, wild type). C. maxima and L. giganteus collected in China and Taiwan, respectively, are the same in China and are estimated to be of the same species as cultured characteristics. The mycelial growth of the collected strains was not significantly different in agar medium but it showed the best growth in YPMG in liquid culture. Optimum temperature for mycelial growth and induction of fruit body were 25℃ and 30℃, respectively. In order to artificial cultivation of C. maxima, cultural characteristics and artificial cultivation were carried out using agricultural by-products and forestry by-products materials. Mycelial growth was suitable in rice straw, cottonwood sawdust, corncob and rice seed medium, and it was selected as a cultivation medium. The suitable medium for artificial cultivation of C. maxima was selected to mixed medium 2(compounding ratio(v/v): 55% of hardwood sawdust, 5% of cottonseed pellets, 10% of cottonseed, 15% of beet pulp, 15% of swollen rice husks). It took about 30 days to be able to harvest, it was faster than oyster mushrooms. The cultivation period was about 30days. A isolate, CMA-002 was not initiation to fruit body primordiuma on the used cultivation substrate. Other 5 isolates were initiate and development to fruit body on the substrate used in this study. The strain CMA-003 was initiated to be fruiting body by 8~10 days after induction of fruiting body in all of the substrates. Isolate CMA-003 was generate to a bundle fruit body. Other isolates, however, were form fruit body individually. The CMA-003 strain was likely highly recommendable strains for farming. The optimum conditions for the induction and growth of C. maxima fruit body were 25~30℃, 8 hr illumination per day with white fluorescent lamp, 90~95% relative humidity, and 1,500 ppm of CO₂ concentration in a cultivation room.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.61-70
• /
• 2019

"Jungmo2510", a rye cultivar, Secale cereal L., was developed by National Institute of Crop Science, RDA in 2015. It was developed from open pollination from within 10 rye cultivars or lines including "Chochun" in 1995. The line "SR95POP-S1-523-1-5-5-4-7-3-B-16-3-19" was selected for its excellent agronomic appearance and was placed in yield trials for two years from 2011 to 2012. The line was designated "Homil55" and was placed in regional yield trials at the four locations around Korea from 2013 to 2015, during which time the name "Jungmo2510" was given. This cultivar is an erect plant type and leaves of short and broad size with a green color, a yellow colored, medium-diameter culm, and a yellowish brown-colored, medium-size grain. The heading date of "Jungmo2510" was April 16, which were 2 days earlier than that of "Gogu". "Jungmo2510" also showed similar to winter hardiness and greater resistance to lodging compared to those of the check cultivar. Over three years, the average dry matter yield of "Jungmo2510" was 802 kg 10a^-1 , which was harvested in late April and was lower than that of the check cultivar "Gogu" (825 kg). The seed productivity of "Jungmo2510" was approximately 481 kg 10a^-1 , which was 2.4% less than that of the check. "Jungmo2510" was higher to than "Gogu" in term of protein content (9.1% and 8.0%, respectively), total digestible nutrients(TDN)(57.5% and 55.5%, respectively), and TDN yield 10a^-1(419 kg and 392 kg, respectively). This cultivar is recommended as a fall sowing crop in areas where the average daily minimum-mean temperatures are higher than -12 ℃ in January, and as a winter crop for whole-crop forage before the planting of rice or green manure around Korea.