• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.1
• /
• pp.71-83
• /
• 1996

Seasonal samples of demersal fish in Chonsu Bay were collected by an otter trawl from May 1991 to February 1992, and analyzed in terms of species composition, abundance and community structure. These data were compared with those obtained just after reclamation in 1986. The species composition of the demersal fish of the present study shows a similar seasonal trend to the previous one. However, the abundance in some species was changed. Gobiid fish such as Cryptocentrus filifer, Chaeturichthys stigmatias and Acanthogobius hasta were diminished, while Repomucenus lunatus, Leiognathus nuchalis and Sillago japonica were increased. This change in abundance of the fish seems to be related to sedimentation of fine particles and irregular discharge of freshwater with high organic content from the reservoir to the bay.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.417-423
• /
• 2016

The effect of the glue solution were investigated in the grinding and elutriation process for manufacturing of White clay pigment. In grinding process, glue solution decreased the production of a too fine powder and enhanced the degree of sorting of ground pigments. The grinding performance and limit are generally influenced by the frictional force. Therefore, the friction force was measured in accordance with the grinding conditions. As a result of measuring a friction force, when using glue solution it showed the lowest friction. Finally, the application of glue solution in grinding process is believed to enhance the degree of sorting of ground pigments by reducing frictional force. In elutriation process, the application of glue solution enabled the screening of larger particles in the same conditions by reducing the sedimentation velocity. This result is due to increase in the viscosity of the glue solution according to glue concentration. As a result, the application of glue solution in elutriation process is though to enlarges the range of the selectable particle size and to enable the segmentation of the particles.

• Journal of Microbiology
• /
• v.42 no.1
• /
• pp.25-31
• /
• 2004

Sf9 cells have obvious advantages for the conventional production technology of vaccine. They are useful tools for high concentration and large-scale cultures. Sf9 cells were grown to maximal concentration, 8${\times}$l0$\^$6/ cells/$m\ell$ in a 500$m\ell$ spinner flask, with a doubling time at the exponentially growing phase of 24.5 hours, using serum-free media. To explore the ability of Sf9 cells to be infected by the Japanese encephalitis (JE) virus Beijing-l strain, Sf9 cells were infected with the virus. By 4-5 days post-infection, 10-15 % of the Sf9 cells showed cytopathic effect (CPE), from granularity to the formation of syncytia and multinucleated giant cells continuously observed over a period of 35 days. Positive fluorescent reactions were detected in 30-40% of cells infected with the JE virus Beijing-l strain, and the uninfected Sf9 cells were completely negative. Virus particles, propagated in Sf9 and Vero cells, were concentrated by sedimentation on 40% trehalose cushions by ultracentrifugation, and showed identical patterns of viral morphogenesis. Complete virus particles, 40 to 50 nm in diameter, were observed, and JE virus envelope (E) proteins, at 53 kDa, were found in the western blot analysis to the anti-JE virus E protein monoclonal antibody and reacted as a magenta band in the same position to the glycoprotein staining. To evaluate whether the infectious virus was produced in Sf9 cells inoculated with the JE virus Beijing-l stain, Sf9 cells were inoculated with the virus, and sample harvested every 5 days. The titers of the JE virus Beijing-l strain rose from 1.0${\times}$l0$\^$5/ to 1.5${\times}$l0$\^$6/ pfu/$m\ell$. The infected Sf9 cells could be subcultured in serum-free medium, with no change in the plaque sizes formed by the JE virus Beijing-l strain in the plaque assay. It is suggested that the ability of the JE virus Beijing-l strain to infect Sf9 cells in serum-free media will provide a useful insect cell system, where the JE virus replication, cytopathogenicity and vaccine immunogen can be studied.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.59-65
• /
• 2020

The purpose of this study is to determine the origin of organic matter on sediment at Sindu-ri tidal flat. Grain size, organic matter, C/N ratio and the 13C and δ15N ratio were measured at three stations (Stn. A, B, C) of the tidal flat. As a result, the spatial variation in sediment properties showed that organic matter was related positively to the sediment mud content. Organic matters originating from marine particulate organic matter (marine POM) and fish farm particulate organic matter (fish farm POM) showed sedimentation of organic matters at Stn. A, sandy tidal flat, though terrestial plant (TP) and benthic microalgae (BMA) did at Stn.C, muddy tidal flat. Meanwhile, Stn. B, the intermediate property of Stn. A and C, was affected by marine POM and BMA. Furthermore, it was revealed that the amount and origin of organic matters in the sediments depended on spatial variation, and the factors were different from the stations. Particularly, at the Stn. C, the sediment showed high concentration of TOC in terrestrial organic matter and smaller size particles (< 63 ㎛). These facts suggest the many small size particles and organic matter will affect the sediment environmental condition in the Stn. C.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.643-658
• /
• 1994

The sedimentary records of anthropogenic metal loads in the Suyeong Bay, Pusan were determined by combining the Pb-210 dating technique with the measurements of heavy metals in the sediment cores. The sedimentation rates of sediment particles ranged from $0.12\;to\;0.20\;g/m^2/yr\;or\;2.4{\sim}4.0\;mm/yr$ in accumulation rates. The lowest sedimentation rate was observed at station S3 which was characterized by a bottom with relatively low organic matter contents(e.g. TIL and TOC). Heavy metals showed generally higher concentrations at station S1 and S2 near the mouth of the Suyeong River than at station S3 and the outmost station S4. The contents of copper, lead and zinc in the sediment cores especially from station S1 and S2 began to increase around 1930, and were at their highest levels in the $1960{\sim}1970$ period as a result of increasing industrial activities. Concentrations of these heavy metals have slightly decreased since 1970, probably due to regulation of pollution discharge. The natural background levels of copper, lead and zinc in the sediments of this bay ranged $18{\pm}4ppm,\;28{\pm}6ppm\;and\;74{\pm}9ppm$, respectively, by averaging the contents in the sediment depths corresponding to periods between about 1900 and 1920 at the four stations. The total amounts of anthropogenic loads deposited in the sediments since about 1930 were estimated to be $9{\sim}291{mu}g/cm^2$ for lead, $165{\sim}1122{mu}g/cm^2$ for zinc and $20{\sim}208{mu}g/cm^2$ for copper. These values were remarkably high at stations S1 and S2 relative to the other two stations. At stations S1 and S2, the anthropogenic loads of lead, copper and zinc constituted $29{\sim}30\%,\;32{\sim}42\%\;and\;28{\sim}35\%$ of the total sedimentary inventories at the present day, respectively. These metal contents have a good correlation(r>0.7) with each other and cadmium measurements also show a positive linear relation with nickel or total organic nitrogen.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.1-10
• /
• 2014

In this study, two different types of dredged fill injection methods are introduced and filling experiments were conducted to analyze the impact of each technique to the distribution and deposition of dredged soil fill and how it influence the final tube shape. Two transparent plastic tubes were fabricated to observe the deposition behavior of the deposited fill material. Both tubes measured 4.0 meters in length (L) and has vinyl tube diameters (D) of 0.5m and 0.7m. T-type and I-type inlet system are also introduced in this paper. The influence of this inlet systems to the distribution and deposition behavior of dredged soil fill inside the vinyl tubes were observed during the experiment. After the sedimentation of the slurry mixture, the water on top of the soil sediments are removed and the slurry mixture was re-injected into the vinyl tube, this process was carried out repeatedly. The shape changes of the vinyl tube, e.g. the changes in both tube height and width, are constantly monitored after each slurry injection and water draining phases. Crater formation was observed in the case of I-Type inlet system and a non-uniform sediment distribution occurred. For the diffusion deposit of soil particles to long distance are minimal shape technique using the T-Type inlet system. Therefore the undrain filling height ratio ($H/D_0$) was found to be around 0.54 to 0.64 and the horizontal strain ratio ($W/D_0$) ranges from 1.45 to 1.54. The filling soil height is proportional to dredged-material filling phases, but, horizontal strain ratio is constant or inversely reduced so that the center of tube body is raised in the upward direction.

• Journal of Environmental Impact Assessment
• /
• v.19 no.5
• /
• pp.475-481
• /
• 2010

Lots of pollutants typically originating from urban transportation are accumulating on the paved surfaces during dry periods and are washed-off directly to the river during a storm. Also, paved surfaces are contributing to increase in peak flows and volume of stormwater flows. These are the main reasons why the water quality of rivers and lakes remain polluted and still below standards. Currently, several management practices are being applied in developed countries but the design standards are still lacking. This research was conducted to develop a treatment technology that can be useful to address the problems concerning runoff quality and quantity. A lab scale infiltration device consisting of a pretreatment tank and media zone was designed and tested for various flow regimes characterizing the low, average and high intensity rainfall. Based on the experiments, the high intensity flow resulted to increase in outflow event mean concentration (EMC) of pollutants, about twice as much as the average outflow EMC. However, 78 to 88% of the total suspended solids were captured and retained in the pretreatment tank because of sedimentation. The removal of heavy metals such as zinc and lead was greatly affected by the vertical placement of woodchip layer prior to the media zone. It was observed that the high carbon content (almost 50%) in the woodchip provided opportunity for enhancing its uptake of metal by adsorption. The findings implied that the reduction of pollutants can be greatly achieved by means of proper pretreatment to allow for settling of particles with a combination of using high carbon source media like woodchip and a geotextile mat to reduce the flow before filtering into the media zone and finally discharging to the drainage system.

• Korean Journal of Ecology and Environment
• /
• v.52 no.4
• /
• pp.316-323
• /
• 2019

This study was carried out to investigate sedimentary environment changes in Nakdong River sediments. For this purpose, sediments at six sites upstream of Gangjeong-Goryung Weir in the middle of the Nakdong River were collected before and after the rainy season. Particles size, IL, TOC, TN, TP, and SRP were analyzed for the sediment environment. The changes in the watershed environment before and after the rainy season (precipitation, discharge, and SS concentration) were investigated. After the rainy season, the amount of precipitation and discharge increased more than three times, and the average concentration of SS in the stream increased more than two times. Fine grained sediment and the concentrations of IL, TOC, TN, TP, SRP were increased after the rainy season. As a result of sediment contamination assessment, IL was 19~68% of the reference value, TN and TP were 21~76% and 21~58% of the reference value. The result showed strong correlation between particle size (Silt+Clay) and organic contents of sediment (IL, TOC, TN, TP and SRP). It is considered that the change of the river watershed environment (precipitation, discharge) is an important factor of the change of sedimentation environment.

• Korean Journal of Ichthyology
• /
• v.25 no.2
• /
• pp.106-118
• /
• 2013

Monthly variation in species composition of shallow water fish in Cheonsu Bay were determined using samples collected by a beach seine in the shallow water at Namdang beach from April 2010 to March 2011. The species composition were compared to the data obtained in 1885~86 and in 1993, and factors affecting the long-term change in species composition were analyzed. Fish collected during the study were 25 species, 2,194 individuals and 16,762 g. Chelon haematocheilus were predominated in abundance, accounting 68.5% in the number of individuals. A few number of fish were collected during the cold months from November to April. Abundance was high from July to September by a large catch of juveniles of pelagic fish. Species composition in 1993 did not differ significantly from that in 1985~86 although Fabonigobius gymnauchen living in the fine sediments were increased in abundance. Abundance increase of this gobiid fish was considered to be related to the sedimentation of fine particles due to weakened water circulation after dike construction. The number of species and catch amount in 2010~11 were significantly decreased comparing to those of the former periods; especially in pelagic fish and benthic fish, but C. haematocheilus were greatly increased in abundance. C. haematocheilus is an estuarine fish being able to survive in relatively poor quality of water. This increase seems to be related to fish larvae from the culture net cages recently installed in the inner bay. Recent decrease in abundance of shallow water fish suggested that water quality has been gradually getting poor and recently attained over a critical level for the nursery function of fish.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.4
• /
• pp.108-114
• /
• 1980

A deterministic conceptual erosion model which simulates detachment, entrainment, transport and deposition of eroded soil particles by rainfall impact and flowing water is presented. Both upland and channel phases of sediment yield are incorporated into the erosion model. The algorithms for the soil erosion and sedimentation processes including land and crop management effects are taken from the literature and then solved using a digital computer. The erosion model is used in conjunction with the modified Kentucky Watershed Model which simulates the hydrologic characteristics from watershed data. The two models are linked together by using the appropriate computer code. Calibrations for both the watershed and erosion model parameters are made by comparing the simulated results with actual field measurements in the Four Mile Creek watershed near Traer, Iowa using 1976 and 1977 water year data. Two water years, 1970 and 1978 are used as test years for model verification. There is good agreement between the mean daily simulated and recorded streamflow and between the simulated and recorded suspended sediment load except few partial differences. The following conclusions were drawn from the results after testing the watershed and erosion model. 1. The watershed and erosion model is a deterministic lumped parameter model, and is capable of simulating the daily mean streamflow and suspended sediment load within a 20 percent error, when the correct watershed and erosion parameters are supplied. 2. It is found that soil erosion is sensitive to errors in simulation of occurrence and intensity of precipitation and of overland flow. Therefore, representative precipitation data and a watershed model which provides an accurate simulation of soil moisture and resulting overland flow are essential for the accurate simulation of soil erosion and subsequent sediment transport prediction. 3. Erroneous prediction of snowmelt in terms of time and magnitute in conjunction with The frozen ground could be the reason for the poor simulation of streamflow as well as sediment yield in the snowmelt period. More elaborate and accurate snowmelt submodels will greatly improve accuracy. 4. Poor simulation results can be attributed to deficiencies in erosion model and to errors in the observed data such as the recorded daily streamflow and the sediment concentration. 5. Crop management and tillage operations are two major factors that have a great effect on soil erosion simulation. The erosion model attempts to evaluate the impact of crop management and tillage effects on sediment production. These effects on sediment yield appear to be somewhat equivalent to the effect of overland flow. 6. Application and testing of the watershed and erosion model on watersheds in a variety of regions with different soils and meteorological characteristics may be recommended to verify its general applicability and to detact the deficiencies of the model. Futhermore, by further modification and expansion with additional data, the watershed and erosion model developed through this study can be used as a planning tool for watershed management and for solving agricultural non-point pollution problems.