• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.650-658
• /
• 2007

The Universal Soil Loss Equation (USLE) has been used in over 100 countries to estimate potential long-term soil erosion from the field. However, the USLE estimated soil erosion cannot be used to estimate the sediment delivered to the stream networks. For an effective erosion control, it is necessary to compute sediment delivery ratio (SDR) for watershed and sediment yield at watershed outlet. Thus, the Sediment Assessment Tool for Effective Erosion Control (SATEEC) was developed to compute the sediment yield at any point in watershed. In this study, the SATEEC was applied to the Sudong watershed, Chuncheon Gangwon to compare the sediment yield using area-based sediment delivery ratio (SDRA) and slope-based sediment delivery ratio (SDRS) at watershed outlet. The sediment yield using the SDRA by Vanoni, SYA and the sediment yield using the SDRS by Willams and Berndt, SYS were compared for the same sized watersheds. The 19 subwatersheds was 2.19 ha in size, the soil loss and sediment yield were estimated for each subwatershed. Average slope of main stream was about 0.86~3.17%. Soil loss and sediment yield using SDRA and SDRS were distinguished depending on topography, especially in steep and flat areas. The SDRA for all subwatersheds was 0.762, however the SDRS were estimated in the range of 0.553~0.999. The difference between SYA and SYS was -79.74~27.45%. Thus site specific slope-based SDR is more effective in sediment yield estimation than area-based SDR. However it is recommended that watershed characteristic need to be considered in estimating yield behaviors.

• Journal of Korean Society on Water Environment
• /
• v.29 no.6
• /
• pp.813-824
• /
• 2013

In this study, sediment pass-through (SPT) from the Sangju Weir and Gumi Weir in the Nakdong River is analyzed numerically using CCHE2D. Sediment delivery is analyzed to predict the sediment discharge rate in the Sangju Weir and Gumi Weir. The sediment discharge from the Sanju Weir is 4,381 tons in the inflow of $3,857m^3/s$, which are 2 year frequency discharge, for 48 hours, and the sediment discharge is 2,766 tons in the inflow of $1,500m^3/s$. The maximum sediment delivery occurs in the immediate downstream of the weir. The sediment discharge from the Gumi Weir is 3,216 tons in the inflow of $5,400m^3/s$, which are 2 year frequency discharge, for 48 hours, and the sediment discharge is 73 tons in the inflow of $3,857m^3/s$. The maximum sediment delivery occurs in the weir. Therefore, the effectiveness of sediment delivery is high in the condition of the 2 year frequency discharge and the gate in the weirs fully are opened.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.268-274
• /
• 2011

BACKGROUND: A large scale of sediment load delivered from watershed causes substantial waterway damages and water quality degradation. Controlling sediment loading requires the knowledge of the soil erosion and sedimentation. The various factors such as watershed size, slope, climate, land use may affect sediment delivery processes. Traditionally sediment delivery ratio prediction equations have been developed by relating watershed characteristics to measured sediment yield divided by predicted gross erosion. However, sediment prediction equations have been developed for only a few regions because of limited sediment data. Besides, little research has been done on the prediction of sediment delivery ratio for asia monsoon period in mountainous watershed. METHODS AND RESULTS: In this study Tank model was expanded and applied for estimating sediment yield to Oship River of east coast. The rainfall-runoff in 2006 was verified using the Tank model and we derived good result between observed and calculated discharge in 2009 at the same conditions. In relation to sediment yield, the sediment delivery rate of 2006 was very high than 2009 regardless of methods for estimating sediment load. It was thought to be affected by heavy rainfall due to the typhoon. CONCLUSION(s): For estimating sediment volume from watershed, long-term monitoring data on discharge and sediment is needed. This model will be able to apply to predict discharge and sediment yield simultaneously in ungauged area. This approach is more effective and less expensive method than the traditional method which needs a lot of data collection.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.221-233
• /
• 2014

Soil erosion, transportation, and sedimentation by water flow often occur in a stream. This excessive occurrence threatens the safety of hydraulic structures, and aggravates natural disasters like flood. To prevent soil disaster according to the soil erosion, it is necessary to predict accurate sediment outflow primarily. Besides, it is very important to choose appropriate models by basin characteristics, to estimate accurate quantity of related factors, and to acquire available hydrological data. Therefore, the purpose of this study is to estimate soil erosion amount and sediment amount according to rainfall-runoff by using rainfall, discharge, and sediment in the Seolmacheon experimental catchment. And, it proposed sediment delivery ratio of the Seolmacheon catchment by result of studying sediment delivery ratio. Hereafter, this study will estimate sediment delivery ratio by basin characteristics, and formulate the method of estimating soil erosion and sediment outflow in various conditions by applying the results in other catchments.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.5
• /
• pp.85-96
• /
• 2003

The Revised Universal Soil Loss Equation (RUSLE) has been used in over 100 countries to estimate potential long-term soil erosion from the field. However, the RUSLE estimated soil erosion cannot be used to estimate the sediment delivered to the stream networks. For an effective erosion control, it is necessary to compute sediment delivery ratio (SDR) for watershed and sediment yield at watershed outlet. Thus, the Sediment Assessment Tool for Effective Erosion Control (SATEEC) was developed in this study to compute the sediment yield at any point in the watershed. To compute spatially distributed sediment yield map, the RUSLE was first integrated with the ArcView GIS and three area based sediment delivery ratio methods were incorporated in the SATEEC. The SATEEC was applied to the Bangdong watershed, Chuncheon, Gangwon Province to demonstrate how it can be used to estimate soil loss and sediment yield for a watershed. The sediment yield using USDA SDR method is 8,544 ton/year and 4,949 ton/year with the method by Boyce. Thus, use of watershed specific SDR is highly recommended when comparing the estimated sediment yield with the measured sediment data. The SATEEC was applied with hypothetical cropping scenario and it was found that the SATEEC can be used to assess the impacts of different management on the sediment delivered to the stream networks and to find the sediment source areas for a reach of interest. The SATEEC is an efficient tool to find the best erosion control practices with its easy-to-use interface.

• Korean Journal of Hydrosciences
• /
• v.5
• /
• pp.71-83
• /
• 1994

The objectives of the paper are to apply the gross erosion and sediment delivery ratio method for estimating sediment deposits and to define their trap efficiencies. For twenty irrigation reservoirs which have sediment survey data, the gross erosion was estimated from the channel erosion as well as the soil losses by applying USLE. The gross erowion was reduced to the sediment yields by multiplying the sediment delivery ratios. The results were multipled by trap efficiencies after Brune method to estimate sediment deposits, which were compared to sediment surveyed data. The comparisons showed deposits. And a trap efficiency relationship was derived from a regression method, which appeared better suited for irrigation reservoirs.

• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1433-1444
• /
• 2016

South Korea is a maritime nation, surrounded by water on three sides; hence, it is important to preserve in a sustainable manner. Most areas, especially those bordering the East Sea, have been suffering from severe coastal erosion. Information on the sediment yield of a river basin is an important requirement for water resources development and management. In Korea, data on suspended sediment yield are limited owing to a lack of logistic support for systematic sediment sampling activities. This paper presents an integrated approach to estimate the sediment yield for ungauged coastal basins by using a soil erosion model and a sediment delivery rate model in a geographic information system (GIS)-based platform. For applying the sediment yield model, a basin specific parameter was validated on the basis of field data, that, ranging from 0.6 to 1.2 for the 19 gauging stations. The calculated specific sediment yield ranged from 17 to $181t/km^2.yr$ in the various basin sizes of Korea. We obtained reasonable sediment yield values when comparing the measured data trends around the world with those in Korean basins.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.632-636
• /
• 2005

Accelerated soil erosion is a worldwide problem because of its economic and environmental impacts. To effectively estimate soil erosion and to establish soil erosion management plans, many computer models have been developed and used. The Revised Universal Soil Loss Equation (RUSLE) has been used in many countries, and input parameter data for RUSLE have been well established over the years. However, the RUSLE cannot be used to estimate the sediment yield for a watershed. Thus, the GIS-based Sediment Assessment Tool for Effective Erosion Control (SATEEC) was developed to estimate soil loss and sediment yield for any location within a watershed using the RUSLE and a spatially distributed sediment delivery ratio. SATEEC was enhanced in this study by developing new modules to:1) simulate the effects of sediment retention basins on the receiving water bodies, 2) prepare input parameters for the Web-based sediment decision support system using a GIS interface. This easy-to-operate SATEEC system can be used to identify areas vulnerable to soil loss and to develop efficient soil erosion management plans.

• Journal of Korea Water Resources Association
• /
• v.34 no.2
• /
• pp.131-140
• /
• 2001

The present study is focused on improving the methodology for the determination of parameters involved in USLE(Universal Soil Loss Equation) based on distributed system concept and investigation of sediment delivery ratio. Generally the distributed system concept consists of grid networks throughout the watershed and sediment can be traced from grid to rid in the direction of the steepest descent. The sediment yield data together with physical data of 10 small irrigation reservoirs in Kyounggi-Do are collected. After the sediment delivery ratio of a grid is defined to be related tothe fraction of forested or covered with delivery proofing area of the grid, the preportionality coefficient(C$_1$) is introduced. The distributed system model is calibrated using the available data for 8 reservoirs and is verified with the data for the ramaining 2 reservoirs, and regression analysis is made to express the proportionality coefficient $C_1$ in terms of watershed physical characteristics. By applying this results the verification of the distributed system model for 2 reservoirs showed a fair result, which justifies the applicability of the proposed method in the present study.

• Water Engineering Research
• /
• v.7 no.1
• /
• pp.29-41
• /
• 2006

The Imha watershed is vulnerable to severe erosion due to the topographical characteristics such as mountainous steep slopes. Sediment inflow from upland area has also deteriorated the water quality and caused negative effects on the aquatic ecosystem of the Imha reservoir. The Imha reservoir was affected by sediment-laden density currents during the typhoon 'Maemi' in 2003. The RUSLE model was combined with GIS techniques to analyze the mean annual erosion losses and the soil losses caused by typhoon 'Maemi'. The model is used to evaluate the spatial distribution of soil loss rates under different land uses. The mean annual soil loss rate and soil losses caused by typhoon 'Maemi' were predicted as 3,450 tons/km2/year and 2,920 ton/km2/'Maemi', respectively. The sediment delivery ratio was determined to be about 25% from the mean annual soil loss rate and the surveyed sediment deposits in the Imha reservoir in 1997. The trap efficiency of the Imha reservoir was calculated using the methods of Julien, Brown, Brune, and Churchill and ranges from 96% to 99%.