• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2062-2071
• /
• 2010

This research has been started with the goal of design and implementation of more innovative next generation security equipment system by understanding and reviewing the technological trend and status of security equipment system. The importance of environmental protection and management is ever increasing recently. Various types of equipment and system solutions are used according to the development of CCTV technology, but more efficient environmental protection and management are not in place because of situational restrictions such as expensive equipment and hard to install. Next generation security equipment system is designed and implemented to compensate and innovate these problem, and it is expected to utilize more effectively with lower cost through this research. In addition, methodology to inquire this system is proposed for security equipment system solution.

• Korean Security Journal
• /
• no.4
• /
• pp.319-341
• /
• 2001

Most of protecting security activity is carried out by manpower partly by security equipment. The protecting security market and the area of protecting security activity is increasing in spite of change of economic and social environment situation. For more effective protecting security activity, the coordination of electronic equipment and manpower is required. So some application method is suggested throughout the thesis, which is especially focused on new approaching method. The integration of intrusion detecting system, C.C.TV system and Access control system is introduced for general application in chapter III, and some application systems are proposed for protecting security activity in chapter IV. But the security equipment is only aid for manpower, so manpower and equipment should be coordinated well.

• Convergence Security Journal
• /
• v.13 no.2
• /
• pp.75-84
• /
• 2013

In Japan, the Security Equipment Association takes the initiative in standardization, the preparation of installation standards and the management of the qualification system. This association is joined by electronic security companies, manufacturers and installers and makes research in security equipment, security alarm system and information security system. But, the Korea Security Association takes the initiative in the security industry in accordance with the security business act, but few electronic security companies that are the hub of the security market have joined the association yet. Currently, there is no organization in which electronic security companies, security equipment manufacturers and installers can participate together, and it's not possible for all the parties concerned to make a concerted effort for the development of security equipment under the circumstances.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.609-625
• /
• 2023

This study is a demand research for the selection of public safety science and technology equipment and suggests an empirical research method. The technology demand survey is the beginning of the selection of innovative technology. And it is the basis of collecting information required for the technology required in the market and helping to apply it to the field. The demand survey for police science and technology can reduce the uncertainty of crime prevention and help the smooth implementation of security policies. However, in Korea, adoption of security science and technology equipment was centered on social issues or researchers' opinions rather than the demands of field users. Until, there was no research has been conducted on the demands of field police officers for selection of security science and technology equipment in Korea. Also, there was no preferential study for the demand for security science and technology equipment. Therefore, this study proposes a methodology that can systematically identify the needs for the technology and equipment of field experts suitable for the public security situation for the selection of security science and technology equipment. Specifically, we propose a sample design for a technology classification system and a survey tool for technology awareness and satisfaction. It is expected that this tool will provide a classification system for security science and technology equipment selected for the Korean police and will help determine the priority of equipment suitable for the field.

• Journal of Korean Society for Quality Management
• /
• v.49 no.2
• /
• pp.113-125
• /
• 2021

Purpose: This study focused on reality and quality improvement of aviation security equipment performance certification system. Methods: For this propose, we analyzed aviation security equipment performance certification system related legislations. Using analyzed data, we suggested advancement plan of aviation security equipment performance certification system. Results: In results, South Korea has been implementing aviation security performance certification system since October 2018. Parts for improvement of system are mutual certification with major countries that operate aviation security equipment performance certification systems, the spread of the defense industry's system, development of similar substances for handling explosives, and introduction of preliminary inspections. Conclusion: The research result could be used as a basic data for upgrading Korea's aviation security performance certification system.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.192-199
• /
• 2016

With changes in insulated defects, the environment, and so on, new partial discharge (PD) data are highly different from the original samples. It leads to a decrease in on-line recognition rate. The UHF signal and pulse current signal of four kinds of typical artificial defect models in gas insulated switchgear (GIS) are obtained simultaneously by experiment. The relationship map of ultra-high frequency (UHF) cumulative energy and its corresponding apparent discharge of four kinds of typical artificial defect models are plotted. UHF cumulative energy and its corresponding apparent discharge are used as inputs. The support vector machine (SVM) incremental method is constructed. Examples show that the PD SVM incremental method based on simulated annealing (SA) effectively speeds up the data update rate and improves the adaptability of the classifier compared with the original method, in that the total sample is constituted by the old and new data. The PD SVM incremental method is a better pattern recognition technology for PD on-line monitoring.

• Carbon letters
• /
• v.26
• /
• pp.61-65
• /
• 2018

Comprehensive calculations of the Rh decoration effect on zigzag CNTs with n ranging from 7 to 12 were conducted in this work to understand the effect of Rh doping on geometric structures and electronic behaviors upon metallic and semiconducting CNTs. The obtained results indicated that Rh dopant not only contributes to the deformation of C-C bonds on the sidewall of CNTs, but also transforms the electron distribution of related complexes, thereby leading to a remarkable increase of the conductivity of pure CNTs given the emerged novel state within the energy gap for metallic CNTs and the narrowed energy gap for semiconducting CNTs. Our calculations will be meaningful for exploiting novel CNT-based materials with better sensitivity to electrons and higher electrical conductivity compared with pure CNTs.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.806-808
• /
• 2009

A new computationally efficient algorithm-based propagator method for two-dimensional (2-D) direction-of-arrival (DOA) estimation is proposed, which uses two parallel uniform linear arrays. The algorithm takes advantage of the special structure of the array which enables 2-D DOA estimation without pair matching. Simulation results show that the proposed algorithm achieves very accurate estimation at a computational cost 4 dB lower than that of standard methods.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1107-1113
• /
• 2015

Test temperature is an important factor affecting the measurement results of dielectric response of field power transformers. In order to better apply the polarization and depolarization current (PDC) to the condition monitoring of oil-paper insulation system in power transformers, the influences and elimination method of test temperature on PDC characteristic spectroscopy (PDC-CS) were investigated. Firstly, the experimental winding sample was measured by PDC method at different test temperatures, then the PDC-CS was obtained from the measurement results and its changing rules were discussed, which show that the PDC-CS appears a horizontal mobility with the rise of temperature. Based on the rules, the “time temperature shift technique” was introduced to eliminate the influence of test temperature. It is shown that the PDC-CS at different test temperatures can be converted to the same reference temperature coincident with each other.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.72-73
• /
• 2021

As discussions of the International Maritime Organization for the introduction of the Marine Autonomous Surface Ship (MASS) began in earnest, discussions were conducted to prioritize cybersecurity (Cyber Risk Management) when developing a system to support MASS operation at the 27th ENAV Committee Working Group (WG2). Korea launched a technology development project for autonomous ships in 2020, and has been promoting detailed tasks for cybersecurity technology development since 2021. MASS operation in a digital maritime communication system environment requires network security of various digital equipment that was not considered in the existing maritime communication environment. This study introduces the basic concept of network security equipment to support MASS operation in the detailed task of cybersecurity technology development, and defines the network security equipment interface for MASS ship application in the basic stage.