• Korean Security Journal
• /
• no.24
• /
• pp.53-66
• /
• 2010

This study aims to analyze kinematic variables regarding lateral break-fall quantitatively that can protect the body, prevent the injury and minimize the impact. To this end, three Hapkido, judo athletes of H University with experience of over 5 years were selected. Test was conducted through three dimensional image analysis by checking the time and order the subjects reach a mat. In this study, lateral break-fall was repeated five times and among them, the best movement was selected. The picture shot with high-speed camera was analyzed by using KWON3D ver. 3.1 program through three dimensional coordinate calculation based on DLT method and smoothing process of data. Study results were as follows. 1. With respect to time variables shown in lateral break-fall of A, B, C athletes, there is small difference in temporal variables and in the order the body reaches a mat. With respect to average value, hand is ($0.94{\pm}0.20$), elbow ($0.97{\pm}0.17$), hip ($0.97{\pm}0.18$), back ($0.98{\pm}0.18$), and shoulder ($1.04{\pm}0.16$). Time variable the body reaches a mat in lateral break-fall is in hand, elbow, hip, back and shoulder. 2. With respect to moving distance variables shown in lateral break-fall of A, B, C athletes, hand is ($34.33{\pm}34.59$), elbow ($52.00{\pm}26.06$), hip ($70.00{\pm}15.72$), back ($153.67{\pm}17.93$), and should ($130.67{\pm}29.02$). The fact that this study contributed to improving security martial arts technique and protecting the body by understanding the principle of lateral break-fall movement is of significance. In addition, the fact that this study provided systematic basic data for improving security martial arts technique is significant.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.19-29
• /
• 2006

As the security of personal information is becoming more important in mobile phones, we are starting to apply iris recognition technology to these devices. In conventional iris recognition, magnified iris images are required. For that, it has been necessary to use large magnified zoom & focus lens camera to capture images, but due to the requirement about low size and cost of mobile phones, the zoom & focus lens are difficult to be used. However, with rapid developments and multimedia convergence trends in mobile phones, more and more companies have built mega-pixel cameras into their mobile phones. These devices make it possible to capture a magnified iris image without zoom & focus lens. Although facial images are captured far away from the user using a mega-pixel camera, the captured iris region possesses sufficient pixel information for iris recognition. However, in this case, the eye region should be detected for accurate iris recognition in facial images. So, we propose a new fast iris detection method, which is appropriate for mobile phones based on corneal specular reflection. To detect specular reflection robustly, we propose the theoretical background of estimating the size and brightness of specular reflection based on eye, camera and illuminator models. In addition, we use the successive On/Off scheme of the illuminator to detect the optical/motion blurring and sunlight effect on input image. Experimental results show that total processing time(detecting iris region) is on average 65ms on a Samsung SCH-S2300 (with 150MHz ARM 9 CPU) mobile phone. The rate of correct iris detection is 99% (about indoor images) and 98.5% (about outdoor images).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.23-31
• /
• 2009

Recently, biometric techniques such as face recognition, finger-print recognition and iris recognition have been widely applied for various applications including door access control, finance security and electric passport. This paper presents the method of using finger-vein pattern for the personal identification. In general, when the finger-vein image is acquired from the camera, various conditions such as the penetrating amount of the infrared light and the camera noise make the segmentation of the vein from the background difficult. This in turn affects the system performance of personal identification. To solve this problem, we propose the novel and fast method for extracting the finger-vein region. The proposed method has two advantages compared to the previous methods. One is that we adopt a locally adaptive thresholding method for the binarization of acquired finger-vein image. Another advantage is that the simple morphological opening and closing are used to remove the segmentation noise to finally obtain the finger-vein region from the skeletonization. Experimental results showed that our proposed method could quickly and exactly extract the finger-vein region without using various kinds of time-consuming filters for preprocessing.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.355-361
• /
• 2006

In large scale environments like airport, museum, large warehouse and department store, autonomous mobile robots will play an important role in security and surveillance tasks. Robotic security guards will give the surveyed information of large scale environments and communicate with human operator with that kind of data such as if there is an object or not and a window is open. Both for visualization of information and as human machine interface for remote control, a 3D model can give much more useful information than the typical 2D maps used in many robotic applications today. It is easier to understandable and makes user feel like being in a location of robot so that user could interact with robot more naturally in a remote circumstance and see structures such as windows and doors that cannot be seen in a 2D model. In this paper we present our simple and easy to use method to obtain a 3D textured model. For expression of reality, we need to integrate the 3D models and real scenes. Most of other cases of 3D modeling method consist of two data acquisition devices. One for getting a 3D model and another for obtaining realistic textures. In this case, the former device would be 2D laser range-finder and the latter device would be common camera. Our algorithm consists of building a measurement-based 2D metric map which is acquired by laser range-finder, texture acquisition/stitching and texture-mapping to corresponding 3D model. The algorithm is implemented with laser sensor for obtaining 2D/3D metric map and two cameras for gathering texture. Our geometric 3D model consists of planes that model the floor and walls. The geometry of the planes is extracted from the 2D metric map data. Textures for the floor and walls are generated from the images captured by two 1394 cameras which have wide Field of View angle. Image stitching and image cutting process is used to generate textured images for corresponding with a 3D model. The algorithm is applied to 2 cases which are corridor and space that has the four wall like room of building. The generated 3D map model of indoor environment is shown with VRML format and can be viewed in a web browser with a VRML plug-in. The proposed algorithm can be applied to 3D model-based remote surveillance system through WWW.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.6
• /
• pp.1-9
• /
• 2007

Recently, as a number of media are fused into a phone, the requirement of security of service provided on a mobile phone is increasing. For this, conventional cryptographic key based on password and security card is used in the mobile phone, but it has the characteristics which is easy to be vulnerable and to be illegally stolen. To overcome such a problem, the researches to generate key based on biometrics have been done. However, it has also the problem that biometric information is susceptible to the variation of environment, whereas conventional cryptographic system should generate invariant cryptographic key at any time. So, we propose new method of producing cryptographic key based on "Biometric matching-based key release" instead of "Biometric-based key generation" by using both face and iris information in order to overcome the unstability of uni-modal biometries. Also, by using mega-pixel camera embedded on mobile phone, we can provide users with convenience that both face and iris recognition is possible at the same time. Experimental results showed that we could obtain the EER(Equal Error Rate) performance of 0.5% when producing cryptographic key. And FAR was shown as about 0.002% in case of FRR of 25%. In addition, our system can provide the functionality of controlling FAR and FRR based on threshold.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.2
• /
• pp.142-151
• /
• 2024

Recently, domestic fishing production of Japanese horse mackerel has been continuously decreasing. To achieve sustainable fishing of this species, it is essential to acquire its target strength (TS) for accurate biomass estimation and to study its ecological characteristics. To date, there has been no TS research using a broadband echosounder targeting Japanese horse mackerel. In this study, for the first time, we synchronized an underwater camera with a broadband frequency (nominal center frequency of 200 kHz, range: 160-260 kHz) to measure the TS according to the body size (16.8-35.5 cm) and swimming angle of the species. The relationship between Japanese horse mackerel length and body weight showed a general tendency for body weight to increase as length increased. The pattern of the frequency spectra (average values) by body length exhibited a similar trend regardless of body length, with no significant fluctuations in frequency observed. The lowest TS value was observed at 243 kHz while the highest TS values were recorded at 180 and 257.5 kHz. The frequency spectra for the swimming angles appeared to be flat at angles of -5, 0, 30, 60, 75, and 80° while detecting more general trends of frequency spectra for swimming angle proved challenging. The results of this study can serve as fundamental data for Japanese horse mackerel biomass estimation and ecological research.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.1
• /
• pp.25-44
• /
• 2010

With the increasing popularity of mobile devices, it has become necessary to protect private information and content in these devices. Face recognition has been favored over conventional passwords or security keys, because it can be easily implemented using a built-in camera, while providing user convenience. However, because mobile devices can be used both indoors and outdoors, there can be many illumination changes, which can reduce the accuracy of face recognition. Therefore, we propose a new face recognition method on a mobile device robust to illumination variations. This research makes the following four original contributions. First, we compared the performance of face recognition with illumination variations on mobile devices for several illumination normalization procedures suitable for mobile devices with low processing power. These include the Retinex filter, histogram equalization and histogram stretching. Second, we compared the performance for global and local methods of face recognition such as PCA (Principal Component Analysis), LNMF (Local Non-negative Matrix Factorization) and LBP (Local Binary Pattern) using an integer-based kernel suitable for mobile devices having low processing power. Third, the characteristics of each method according to the illumination va iations are analyzed. Fourth, we use two matching scores for several methods of illumination normalization, Retinex and histogram stretching, which show the best and $2^{nd}$ best performances, respectively. These are used as the inputs of an SVM (Support Vector Machine) classifier, which can increase the accuracy of face recognition. Experimental results with two databases (data collected by a mobile device and the AR database) showed that the accuracy of face recognition achieved by the proposed method was superior to that of other methods.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.2
• /
• pp.82-85
• /
• 2014

It is helpful to use Intelligent Video Surveillance to replace and supplement the demerit which can possibly occur due to the mistake that can be made by human management. To accomplish this, it is essential that the system should digitalize image information from surveillance camera so that the system, itself, can be able to locate a object and to analyze the pattern of the object. Also, it is imperative that the system should have ability to operate a alarm and a entrance blocking system and to notify a situation to a security manager. Zooming a small object form a screen, however, requires a exact zooming ratio of the object and a shift of centric coordinate. In this paper, It is able to locate and observe closely a object from flexible background, regardless of the distance, by calculating a zooming ratio according to object moment, pan coordinate, and tilt coordinate.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.560-567
• /
• 2013

The release of iPhone by Apple in 2009 has changed the life pattern of an individual tremendously. That is, with the emergence of a smart phone, various services including voice/video call, camera, receiving and sending of e-mail, and web browsing have been realized. However, the broader the scope of the use of a smart phone has become, the greater the need for companies to introduce an MDM solution for protecting important documents has become. However the MDM solution may have a problem in that all data such as contacts, pictures, and memos saved in the smart phone can be accessed unlimitedly. For this reason, there is a risk that unwanted violation of privacy may happen to smart phone users. This paper proposed a plan to protect a personal privacy file of smart phone users, which disables access by others except for related smart phone users by enabling a person in charge of security or an MDM manager in a company to have access only to the file which was allowed by smart phone users to be disclosed and by saving non-disclosed files in a virtual disk.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.161-166
• /
• 2003

In this paper, we propose a novel method of design and implementation for the multimedia monitoring system using Web Camera. Recently WebCam is variously applied to many different areas and implemented as an improved performance using convenient functions of Web in this Internet era. Multimedia moving pictures has been popularly used in a variety of ways in different areas of monitoring systems in order to enhance the performance and the service with their data compression capability and the speed of the communication network these days. The design method of WebCam system presented in this paper might offer not only a convenient function of the monitoring system but great application capabilities. It can be used for a real time application of the multimedia picture and audio transmission so that the monitoring system can manage the security information in the sense for the reality. Tn addition, the monitoring system may be used as an inreal-time application using data storage and retrieval features of the Web. We offer both functions of monitoring in this structured form of implemented system.