• 재무관리연구
• /
• 제15권2호
• /
• pp.401-419
• /
• 1998

This paper examines the international arbitrage pricing model (IAPM) in regional equity markets setting. Factor analyses are used to estimate the international common risk factors. And the cross-sectional regression analyses are used to test the validity of regional IAPMs and Chow tests are used to evaluate the integration of regional equity markets. The results of factor analyses show that the number of common factors in each regional group is seven. The cross-sectional regression results lead us not to reject that the IAPMs are regionally valid but Chow test results lead us to reject that regional equity markets are integrated.

• 한국의류산업학회지
• /
• 제4권2호
• /
• pp.156-162
• /
• 2002

The purposes of this study were to classify somatotype was obtained from the factor scores of the upper half of body and analyze the somatometric characteristics. The sample group was drawn from boys at the ages 9 to 10 living in Pusan and Kyungsangnam-do. Data from each boy comprised 36 anthropometric measurements and 7 photographic measurements. The study reached following conclusions. 1. According to the analysis to draw somatometric factors, seven indicative factors were obtained from measurements of the upper half of body. The most significant factor "sectional size" and the second most significant factor "longitudinal size" characterized most aspects of body shape. 2. According to the analysis of somatometric characteristics by the upper half of body, they were categorized into four types; Boys in type 1 had high stature, broadest shoulders, average frame, flattest chest and quite protruded shoulder blades and belly; boys in type 2 had shortest stature, smallest frame, most sloping shoulders and flattest shoulder blades and belly; boys in type 3 had quite corpulent with average stature, rising shoulders, most protruded chest and shoulder blades and belly of protrusion close to the average; boys in type 4 had highest stature, biggest frame, broad shoulders and back, and most protruded shoulder blades and belly.

• 복식
• /
• 제52권2호
• /
• pp.115-124
• /
• 2002

The purposes of this study were to classify somatotype was obtained from the factor scores of the upper half of bodies and analyze the Somatometric characteristics. The sample group (hereinafter referred to as "1st age group") was drawn from bays at the ages 7 to 8 living in Pusan and Kyungsangnam-do. Data from each boy comprised 36 anthropometric measurements and 7 photographic measurements. The study reached following conclusions. 1. According to the analysis to draw Somatometric factors by the 1st age group, seven indicative factors were obtained from measurements of the upper half of bodies. The most significant factor "sectional size" and the second most significant factor "longitudinal size" characterized most aspects of body shape of boys at the ages 7 to 8. 2. According to the analysis of Somatometric characteristics by the upper half of bodies, the 1st age group was categorized into three types : Boys in type 1 had highest stature, biggest frame, broadest shoulders, most protruded chest and shoulder blades and flattest belly : boys in type 2 had shortest stature, smallest frame, sloping shoulders and most protruded belly boys in type 3 had quite high stature and his other measurements were close to the averages of this age group.he averages of this age group.

• 설비공학논문집
• /
• 제19권3호
• /
• pp.220-227
• /
• 2007

Heat transfer and momentum transfer under conditions of both oscillating flow and oscillating pressure within pulse tubes show very different behavior from those for steady state conditions. The analytic solutions of axial velocity and temperature of the gas within pulse tubes were obtained by assuming that the variations in pressure and temperature were purely sinusoidal and small. The shear stress and the heat flux at the tube wall obtained from the solutions are expressed in terms of the cross-sectional averaged velocity, the difference between mean temperature and instantaneous cross-sectional averaged temperature and the difference between mean pressure and instantaneous pressure. It is shown that the complex shear factor, which has been applied to momentum transfer of incompressible oscillating flow, and the complex Nusselt number, which has been applied to either heat transfer with oscillating pressure only or heat transfer of incompressible oscillating flow, could also be used for momentum transfer and heat transfer subjected to both oscillating flow and oscillating pressure, respectively.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.643-649
• /
• 2003

본 연구의 목적은 부착실험 및 휨실험을 실시하여 구조용 합성섬유의 단면적 및 표면형상의 변화에 따른 부착성능과 휨성능을 평가하는 것이다. 6가지 다른 형상의 구조용 합성섬유를 조사하였고 부착 및 휨실험을 수행하였다. 6가지 형상의 구조용 합성섬유를 조사하였고 휨시험과 부착시험을 실시하였다. 실험변수는 3가지 종류의 형상과 2가지 종류의 단면적 변화로 하였다. 실험결과 구조용 합성섬유의 단면적이 동일할 때 주기 및 높이가 증가할수록 부착하중 및 인발 파괴 에너지는 감소하고 휨강도는 증가하였다. 또한 주기 및 높이가 일정할 섬유의 단면적이 증가할수록 인발하중과 인발 파괴 에너지는 증가하였고 휨강도는 감소하였다. 실험결과를 기본으로하여 콘크리트의 구조성능은 섬유의 부착성능 뿐만 아니라 콘크리트에 혼입되어 있는 섬유의 수, 인장하중에 저항할 수 있는 섬유의 재료특성 등에 복합적으로 영향을 받는 다는 것을 알 수 있었다.

• 한국지진공학회논문집
• /
• 제13권3호
• /
• pp.51-65
• /
• 2009

콘크리트 교량의 합리적인 내진설계는 지진이 발생할 때 연성파괴메커니즘이 유도될 수 있도록 적절하게 교각 연성도를 확보하는 것이다. 현행 기준에서는 이를 위해 휨모멘트의 설계지진력을 산정할 때 응답수정계수를 도입하고 있으며, 연성도 확보를 위한 횡방향철근량을 규정하고 있다. 그러나, 이러한 내진규정은 일반적으로 단면이 크게 설계되는 우리나라에서는 횡방향철근이 과다하게 산정되는 비합리적이었다. 이를 개선하기 위해 소요연성도에 기반한 새로운 내진설계법이 제안되었으나 거동특성과 횡방향철근의 유효구속력이 다른 중공단면에 적용하기 위해서는 향후 많은 검증과 보완이 필요하다. 이에 본 연구에서는 축방향철근의 겹침이음과 횡방향철근량을 변수로 한 중공단면기둥을 제작하여 준정적 재하실험을 수행하였으며 다양하게 내진거동특성을 분석하고 내진성능을 확인하였다. 본 연구 결과는 향후 중공단면교각의 연성도(성능)기반 내진설계를 위한 기초자료로 제공될 수 있다.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 2005년도 제57차 추계 학술대회 연제집
• /
• pp.458-458
• /
• 2005

• 산업융합연구
• /
• 제2권2호
• /
• pp.127-147
• /
• 2004

This paper examines the time-series relations among expected return, risk, and book-to-market(B/M) at the portfolio level. The time-series analysis is a natural alternative to cross-sectional regressions. An alternative feature of the time-series regressions is that they focus on changes in expected returns, not on average returns. Using the time-series analysis, we can directly test whether the three-factor model explains time-varying expected returns better than the characteristic-based model. These results should help distinguish between the risk and mispricing stories. We find that B/M is strongly associated with changes in risk, as measured by the Fama and French(1993) three-factor model. After controlling for changes in risk, B/M contains little additional information about expected returns. The evidence suggests that the three-factor model explains time-varying expected returns better than the characteristic-based model.

• 소성∙가공
• /
• 제1권1호
• /
• pp.66-74
• /
• 1992

According to the variation of hydrostatic pressure on the central axis of deformable material, the V-shaped central bursting defect may be created in extrusion or drawing processes. The process factors which affect the generation of defects are semi-angle of die, reduction ratio of cross-sectional area, friction factor, material properties and so on. The combination of these factors can determine the possibility of defect creation and the shape of various round holes which have been created inside already. By the rigid plastic finite element method, this paper describes the observations of change in shape of round holes with process conditions such as semi-angle of die, reduction ratio of cross-sectional area and friction factor at the non-steady state of axisymmetrical extrusion process when the round hole is already existed inside the original billet. Also, the effects of process factors are investigated to prevent the possible defects.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1047-1054
• /
• 2001

Atomic Force Microscope (AFM) was used to study cross sectional profiles and dimensions of fatigue striations in 2017-T351 aluminum alloy. Their widths(SW) and heights (SH, SH(sub)h, SH(sub)ι) were measured from the cross sectional profiles of three-dimension AFM images. The following results that will be helpful to understand the fatigue crack growth mechanism were obtained. (1) The relation of SH=$\alpha$(SW)(sup)1.2 was obtained. (2) The ratio of the striation height to its width SH/SW, SH(sub)h/SW and SH(sub)ι/SW did not depend on the stress intensity factor range ΔK and the stress ratio R( =P(sub)min/P(sub)max = K(sub)min/K(sub)max). (3) Effect of precipitate on the morphology of striation was changed by the relative dimensional difference between the striation width SW and the precipitates. From these results, the applicability of the AFM to nano-fractography is discussed.