• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.120-126
• /
• 2010

This paper propose analysis and examination of the melting characteristic of fuse elements by repeating overcurrent as a depletion factor of high pressure current limiting fuse through test following existence and nonexistence of extinction material and various configuration of elements. To examine deterioration progress rate by repeating overcurrent we analyzed heat for various element notching configuration, designed plate type, ring type element and estimated the relationship with life span by analyzing breaking characteristic through repeating overcurrent test with adjusting load factor at Silicon Dioxide(SiO2) filled state or in air. A Crack by repeat stress, decrease of section and transformation by friction with extinction material by repeating overcurrent causes a problem which shortens life span based on fuse repeating frequency. Since the contents of this paper might be useful to research the correlation between friction of materials and repeating life span based on load factor of repeating current, the quality of product would be improved through solution of the problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.561-565
• /
• 1994

An automatic measuring system of three dimensional shape by a projection method with grating pattern from in optical spatial modulator has been developed. The characteristics of the system were studied. This system is composed of a projector, an optical spatial modulator, a CCD camera, and computer. A liquid crystal is used as the optical spatial modulator. The grating patterns that ire projected on the surface of the object are controlled by the computer connected with the optical spatial modulator. The projector patterns are measured by the CCD camera. The data are transferred to the computer. After a transformation into line data, the data are analyzed to obtain the coordinate of the surface of the object. This system has advantages as follows. (1) It is possible to capture the surface topography without any contact. (2) The time required for the measurements is shorter than the light-section method. (3) An optical spatial modulator using a liquid crystal is possible to control the grating patterns accurately by a computer. Surfaces of a plate and a cylinder were measured. The threshold level had an influence on the measurement. It was shown that this system has adequae accuracy in the measurements.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.2
• /
• pp.165-169
• /
• 2004

Pleomorphic adenoma is the most common neoplasm of the parotid gland, generally presenting as a slowly growing, firm, well-circumscribed, painless nodule. It is often difficult to separate into benign and malignant categories because its bland histomorphologic and cytologic features. This tumor can be rarely associated with cystic change, hemorrhagic necrosis, or spontaneous infarction. Necrosis of lesional tissue may be associated with malignant transformation, particularly in a pleomorphic adenoma. We report a case of 50-year-old woman presented with a enlarging right parotid mass. Computed tomographic scan demonstrated a right superficial lobe mass with ill-defined border. The preoperative fine needle aspiration yielded necrotic debris and atypical squamous elements that were thought to be compatible with high degree of mucoepidermoid carcinoma. A total parotidectomy with intraoperative frozen section revealed extensive necrosis and diagnosed as malignant tumor. This tumor was finally diagnosed as a pleomorphic adenoma with necrosis on permanent sections. Caution should be exercised in evaluation of the parotid neoplasms with central necrosis to avoid misdiagnosis of such lesions as malignancy.

• Atmosphere
• /
• v.26 no.3
• /
• pp.473-482
• /
• 2016

An accurate determination of turbulent fluxes over an urban area is a challenging task due to its morphological diversity and associated flow complexity. In this study, an eddy covariance (EC) method is applied over a highly heterogeneous urban area in a small city (Gongju), South Korea to investigate the quantitative influence of 'coordinate tilt' in determining the turbulent fluxes of sensible heat, latent heat, momentum, and carbon dioxide mass. Two widely-used coordinate transform methods are adopted and applied to eight directional sections centered on the site to analyze a 1-year period EC measurement obtained from the urban site: double rotation (DR) and planar fit (PF) transform. The results show that mean streamline planes determined by the PF method are distinguished from the sections, representing morphological heterogeneity of the site. The sectional pitch angles determined by the DR method also compare well with those in the PF method. Both the PF and DR methods show large variabilities in the determined streamline planes at each directional section, implying that flow patterns may form in a complicate way due to the surface heterogeneity. Resulting relative differences of the turbulent fluxes, defined by $(F_{DR}-F_{PF})/F_{DR}$, are found on average +13% in sensible heat flux, +21% in latent heat flux, +37% in momentum flux, and +26% in carbon dioxide mass flux, which are larger values than those reported previously for fairly homogeneous natural sites. The fractional differences depend significantly on wind direction, showing larger differences in northerly winds at the measurement site. It is also found that the relative fractional differences are negatively correlated with the mean wind speed at both stable/unstable atmospheric conditions. These results imply that EC turbulent fluxes determined over heterogeneous urban areas should be carefully interpreted with considering the uncertainty due to 'coordinate tilt' effect in their applications.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.389-395
• /
• 2016

In this paper, vibration characteristics in terms of the airfoil cross-sectional shape was examined by using the EDISON co-rotational plane beam-transient analysis. Co-Rotational plane beam analysis is appropriate for large rotation and small strain. Assuming aircraft wing as a cantilevered beam, natural frequencies of each airfoil cross-sectional shape were estimated using VABS program and fast Fourier transformation(FFT). VABS conducts finite element analysis on the cross-section including the detailed geometry and material distribution to estimate the beam sectional properties. Under the same airfoil geometric configuration and material selection, variation of material induced difference in the deflection and natural frequencies. It was observed that variation of the natural frequency was dependent on variation of the airfoil shape and material.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.2
• /
• pp.128-133
• /
• 2015

This paper describes the construction of a static 3D ultrasonography image by tracking the radiation beam position during the handy operation of a 1D array probe to enable point-of-care use. The theoretical model of the transformation from the translational and rotational information of the sensor mounted on the probe to the reference Cartesian coordinate system was given. The signal amplification and serial communication interface module was made using a commercially available sensor. A test phantom was also made using silicone putty in a donut shape. During the movement of the hand-held probe, B-mode movie and sensor signals were recorded. B-mode images were periodically selected from the movie, and the gray levels of the pixels for each image were converted to the gray levels of 3D voxels. 3D and 2D images of arbitrary cross-section of the B-mode type were also constructed from the voxel data, and agreed well with the shape of the test phantom.

• Journal of Veterinary Clinics
• /
• v.26 no.5
• /
• pp.467-471
• /
• 2009

This report describes Neural Tube Defects (NTDs) with Abdominal Wall Defects (AWDs) on the sibling of Yorkshire terriers. The NTDs and AWDs are rare serious congenital defects. The NTDs are neurulation abnormality that results from to failed transformation of the neurual tube by the incomplete closure of the embryonic neural plate. These dysraphic states range form mild to severe according to developmental malformation that include fusion defects of skull (crania bifida; CB) and fusion defects of vertebrae (spina bifida; SB). The AWDs are genetic defects that results from to failed formation of abdominal wall and cavity. These dysraphic states are omphalocele and gastroschisis. The 12-month dam was delivered by caesarian section and 4 littermate had obvious malformations. One male dead stillbirth fetus (L1) was revealed the extruded abdominal viscera, omphalocele. One female fetus (L2) was died within 1 hour after birth with defects of abdominal muscle upper umbilicus, gastroschisis. 3rd fetus (L3) was died within 36 hours after parturition and revealed a copious dermal and vertebral defects on the midline thorax, upper SB asperta. 4th fetus (L4) is still growing well now at 6 months but at the 2 week age, appears hairy nevus on the frontal cranium and dorsal thoracic portion. The radiograph of L1 and L2 are shown decrease bony density of calvarium and L3 was shown defect of spinose processes of the T9-T13. On our knowledge, this is first report of the SB and CB in Yorkshire terrier. And also sibling of NTDs with AWDs that has not previously been reported in the dog.

• Plant Biotechnology Reports
• /
• v.3 no.2
• /
• pp.157-165
• /
• 2009

Human erythropoietin (EPO) is a leading product in the biopharmaceutical market, but functional EPO has only been produced in mammalian cells, which limits its application and drives up the production costs. Using plants to produce human proteins may be an alternative way to reduce the cost. However, a recent report demonstrated that overexpression of the human EPO gene (EPO) in tobacco or Arabidopsis rendered males sterile and retarded vegetative growth, which raises concern whether EPO might interfere with hormone levels in transgenic plants. In the present study, we demonstrated that overexpressing EPO with additional 5'-His tag and 3' ER-retention peptides in tobacco did not cause any developmental defect compared to GUS plants. With our method, all 20 transgenic plants grew on selective medium and, further confirmed by PCR, were fertile. Most of them grew similarly compared to GUS plants. Only one transgenic plant (EPO2) was shorter in plant height but had twice the life span compared to other transgenic plants. When 11 randomly selected EPO plants, along with the abnormal plant EPO2, were subjected to RT-PCR analysis, all of them had detectable EPO transcripts. However, their protein levels varied considerably; seven of them had detectable EPO proteins analyzed by western blot. Our results indicate that overexpressing human EPO protein in plants does not have detrimental effects on growth and development. Our transformation systems allow us to further explore the possibility of glycoengineering tobacco plants for producing functional EPO and its derivatives.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.39-47
• /
• 2002

The objective of this study is to provide a Precise form of spatial normalization with affine transformation. The quantitative comparison of the brain architecture across different subjects requires a common coordinate system. For the common coordinate system, not only global brain but also a local region of interest should be spatially normalized. Registration using mutual information generally matches the whose brain well. However. a region of interest may not be normalized compared to the feature-based methods with the landmarks. The hybrid method of this Paper utilizes feature information of the local region as well as intensity similarity. Central gray nuclei of a brain including copus callosum, which is used for feature in Schizophrenia detection, is appropriately normalized by the hybrid method. In the results section. our method is compared with mutual information only method and Talairach mapping with schizophrenia Patients. and is shown how it accurately normalizes feature .

• Journal of Korean Society on Water Environment
• /
• v.32 no.5
• /
• pp.475-491
• /
• 2016

The Changwon and Nam streams that run through the Changwon city were evaluated based on longitudinal and horizontal configurations and vegetation state in order to prepare a restoration plan. Riparian vegetation of the Changwon and Nam streams are normally dominated by herbaceous plants. However, the woody plants, Salix pseudolasiogyne, Rubus parvifolius, Salix koreensis, Robinia pseudoacacia, and Amorpha fruticosa have appeared. Planting to introduce various types of plants for landscape architecture has also been observed. Evaluation of naturalness based on the vegetation state of both Changwon and Nam streams showed very low naturalness of degree 1 or 2, with the exception of a few reaches of the upstream sector. In these few reaches of the upstream sector, Salix koreensis and Salix chaenomeloides showed heights at the subtree level, however, they were located at the position of shrubland close to the waterway. These reaches were, therefore, evaluated as degree 3 rather than degree 4 in naturalness. The result of diagnostic evaluation classified by reach indicated the requirement for active restoration, such as transformation of the channelized stream into a meandering one and a step-type cross section into a pool-type one, introduction of vegetation suitable to the region and site, and creation of an ecological network between the stream and the surrounding terrestrial ecosystems.