• Steel and Composite Structures
• /
• v.15 no.2
• /
• pp.131-150
• /
• 2013

This paper presents the experimental results of axially loaded stub columns of slender steel hollow square section (SHS) strengthened with carbon fiber reinforced polymers (CFRP) sheets. 9 specimens were fabricated and the main parameters were: width-thickness ratio (b/t), the number of CFRP ply, and the CFRP sheet orientation. From the tests, it was observed that two sides would typically buckle outward and the other two sides would buckle inward. A maximum increase of 33% was achieved in axial-load capacity when 3 layers of CFRP were used to wrap HSS columns of b/t = 100 transversely. Also, stiffness and ductility index (DI) were compared between un-retrofitted specimens and retrofitted specimens. Finally, it was shown that the application of CFRP to slender sections delays local buckling and subsequently results in significant increases in elastic buckling stress. In the last section, a prediction formula of the ultimate strength developed using the experimental results is presented.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2E
• /
• pp.55-61
• /
• 1997

This paper proposes a MSHMM(Multi-Section Hidden Markov Model) recognition method based on Fuzzy Concept, as a method on the speech recognition of speaker-independent. In this recognition method, training data are divided into several section and multi-observation sequences given proper probabilities by fuzzy rule according to order of short distance from MSVQ codebook per each section are obtained. Thereafter, the HMM per each section using this multi-observation sequences is generated, and in case of recognition, a word that has the most highest probability is selected as a recognized word. In this paper, other experiments to compare with the results of these experiments are implemented by the various conventional recognition methods(DP, MSVQ, DMS, general HMM) under the same data. Through results of all-round experiment, it is proved that the proposed MSHMM based on fuzzy concept is superior to DP method, MSVQ method, DMS model and general HMM model in recognition rate and computational time, and does not decreases recognition rate as 92.91% in spite of increment of speaker number.

• Structural Engineering and Mechanics
• /
• v.8 no.5
• /
• pp.465-476
• /
• 1999

A structural optimization process is presented for arches with varying cross-section. The optimality criteria method is used to develop a recursive relationship for the design variables considering displacement, stresses and minimum depth constraints. The depth at the crown and at the support are taken as design variables first. Then the approach is extended by taking the depth values of each joint as design variable. The curved beam element of constant cross section is used to model the parabolic and circular arches with varying cross section. A number of design examples are presented to demonstrate the application of the method.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.303-308
• /
• 2001

A rotating blade of steam turbines is designed using blade design system. To minimize the design time. quasi three dimensional flow analysis code is adopted to calculate blade section. The blade section lies on a streamline determined by previous steam turbine design procedures. The blade design system makes a transform of streamline coordinates, (m, r$\theta$), to (m', $\theta$) coordinates and all design procedure except 3 dimensional stack-up is performed in the coordinates. Each designed blade section is stacked-up and whole 3 dimensional blade can be modified by correcting 2D section, repeatly. The full 3D numerial analysis for the one stage including designed rotating blade will be performed later

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.6
• /
• pp.450-458
• /
• 2008

Recently, Cartesian grid approach has been popular to generate grid meshes for complex geometries in CFD (Computational Fluid Dynamics) because it is based on the non-body-fitted technique. This paper presents a method of an octree generation and boundary cell clipping using section curves for fast octree generation and elimination of redundant intersections between boundary cells and triangles from 3D triangular mesh. The proposed octree generation method uses 2D Scan-Converting line algorithm, and the clipping is done by parameterization of vertices from section curves. Experimental results provide octree generation time as well as Cut-cell clipping time of several models. The result shows that the proposed octree generation is fast and has linear relationship between grid generation time and the number of cut-cells.

• Nuclear Engineering and Technology
• /
• v.46 no.4
• /
• pp.475-480
• /
• 2014

We developed a simple method to prepare the displacement damage cross section of SiC using NJOY and SRIM/TRIM. The number of displacements per atom (DPA) dependent on primary knock-on atom (PKA) energy was computed using SRIM/TRIM and it is directly used by NJOY/HEATR to compute the neutron energy dependent DPA cross sections which are required to estimate the accumulated DPA of nuclear material. SiC DPA cross section is published as a table in DeCART 47 energy group structure. Proposed methodology can be easily extended to other materials.

• Mycobiology
• /
• v.47 no.2
• /
• pp.165-172
• /
• 2019

Species that belong to Penicillium section Sclerotiora are commonly found in various terrestrial environments, but only a few have been reported in marine environments. Because the number of Penicillium species reported in marine environments is increasing, we investigated the diversity of Penicillium section Sclerotiora in marine environments in Korea. Based on sequence analyses of b-tubulin and calmodulin loci, 21 strains of section Sclerotiora were identified as P. bilaiae, P. daejeonium, P. exsudans, P. herquei, P. cf. guanacastense, P. mallochii, P. maximae, and P. viticola. Three of them were confirmed as new to Korea: P. exsudans, P. mallochii, and P. maximae. Here, we have provided detailed morphological descriptions of these unrecorded species.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.187-196
• /
• 2013

This study is focused on analyzing the deformation types of seaside armor stones based of field survey in order to establish the cause of abrasion following the deformation of seaside armor stones. 1. The deformation of seaside armor stone in saemangeum sea dike was classified as three different types: floating, deviation, and abrasion. 2. It was discovered that the stones floated to the extent of maximum 50 m, as the result of inspecting floating stones which were situated on different ten places. 3. The average number of deviation in the high ocean wave section was four times more than that in the ordinary ocean wave section, as a result of comparing the deviation number of the ordinary ocean wave section and that of the high ocean wave section for the purpose of inspecting the relation between the deviation of armor stones and the effects of ocean wave. 4. The angular shape of armor stones seen in the initial construction period has been abraded smoothly, as result of comparing of the shape change of armor stones for the purpose of inspecting abrasion state of seaside armor stones. 5. It was discovered that the abrasion of armor stone was severe in the section of many floating stones, as a result of analyzing the levels of abrasion and the cumulative sections of floating stones for the purpose of investigating the cause of abrasion.

• Journal of Preventive Medicine and Public Health
• /
• v.11 no.1
• /
• pp.14-23
• /
• 1978

This survey was conducted on a total 672 pulmonary tuberculosis patients who were registered at certain health center in Busan, during the period from July 15th to August 31st, 1977, based on Modified Cornell Medical Index(CMI) consisting of 70 questions. Number of 'Yes' response of an individual patients was collected by each large section of Modified CMI. The each number of 'Yes' response was standardized by mean of Z scoring. Z score was obtained by following formula. Z=50+10(Xi-m)/s M : means of 'Yes' response by each section for all subjects s : standard deviation of the mean Xi : number of 'Yes' response by each section in an individual patients The results of obtained were as follows: 1. The number of investigated cases were 672 (459 males and 213 females). The most prevalent group was 20-24 years old group as 18.4% by age, moderate advanced group as 50.8% by radiological diagnosis, INH+PAS+SM group as 34.7% by antituberculotics and unemployed group as 59.9% by occupation. By bacteriological examination of sputum, the rate of negative group was 60.5% and positive group was 39.5%. 2. Z score of complaints by sex was higher in female as 52.4 than in male as 48.9 in general. By radiological diagnosis, there was decreasing tendency with age in male but increasing tendency with age in female. 3. By age group, Z score of complaints was increasing tendency with age in male but there was non-significant differences in female. 4. By bacteriological examination of sputum, the Z score of complaints was increasing tendency with the more discharged bacteria in both sex generally. 5. By antituberculotics, INH group was revealed the highest Z score of complaints as 50.4 in male and INH+PAS group was the highest as 51.21 in female. 6. By occupation, agricultural and fisherman group was the highest as 53.5 and the next group was professional, technical and related workers, unemployed and sales workers in that order.

• Journal of Preventive Medicine and Public Health
• /
• v.44 no.1
• /
• pp.48-55
• /
• 2011

Objectives: The purpose of this study was to examine the impact of Diagnosis-Related Group (DRG)-based payment on the length of stay and the number of outpatient visits after discharge in for patients who had undergone caesarean section. Methods: This study used the health insurance data of the patients in health care facilities that were paid by the Fee-For-Service (FFS) in 2001-2004, but they participated in the DRG payment system in 2005-2007. In order to examine the net effects of DRG payment, the Difference-In-Differences (DID) method was adopted to observe the difference in health care utilization before and after the participation in the DRG payment system. The dependent variables of the regression model were the length of stay and number of outpatient visits after discharge, and the explanatory variables included the characteristics of the patients and the health care facilities. Results: The length of stay in DRG-paid health care facilities was greater than that in the FFS-paid ones. Yet, DRG payment has no statistically significant effect on the number of outpatient visits after discharge. Conclusions: The results of this study that DRG payment was not effective in reducing the length of stay can be related to the nature of voluntary participation in the DRG system. Only those health care facilities that are already efficient in terms of the length of stay or that can benefit from the DRG payment may decide to participate in the program.