• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.639-642
• /
• 1999

Pullout test known as Lok test among the test methods to evaluate concrete strength strength is a test method which is used to decide the form removal time by assessing the early strength of concrete in a new construction, or to control the quality of newly placed concrete. This method has inconvenience to place inserts on the form work in advance, however, the placing work is quite simple and it has advantage that the strength can be measured at field as long as the inserts are placed. In this study, the first step is to investigate the properties of test method itself, by performing the laboratory test which covers deviation of the method and factors affecting the results, etc. The second step is to correlate the result with cylinder strength and other NDT methods such as rebound hammer, ultrasonic method, etc. And that, the results are compared with foreign results to find the differences between the two. In this research, new factors such as moisture content, area of aggregate failure cross section and area of aggregate separation cross section, etc as well as wate-cement ratio and age are investigated.

• 천문학회보
• /
• 제37권2호
• /
• pp.79.1-79.1
• /
• 2012

Due to the quantum interference of many atomic levels, the exact scattering cross section around a given resonance transition deviates from the Lorentz function when the frequency of the incident radiation is quite far from the resonance frequency. This atomic effect is quite significant in the case of damped Ly alpha systems, where HI column density is in excess of 10^20 cm^-2. In this poster, we present the deviation quantitatively taking into consideration of the Rayleigh and Raman scattering around Lyman alpha and Lyman beta.

• 설비공학논문집
• /
• 제16권6호
• /
• pp.589-598
• /
• 2004

Flow condensation heat transfer coefficients (HTCs) of R22 and R134a were measured on a horizontal 9 hole aluminum multi-channel tube. The main test section in the refrigerant loop was made of a flat multi-channel aluminum tube of 1.4 mm hydraulic diameter and 0.53 m length. Refrigerant was cooled by passing cold water through an annulus surrounding the test section. Data were obtained in the vapor qualities of 0.1∼0.9 at mass flux of 200∼400 kg/$m^2$s and heat flux of 7.3∼7.7 ㎾/$m^2$ at the saturation temperature of 4$0^{\circ}C$. All popular correlations in single-phase subcooled liquid and flow condensation originally developed for large single tubes predicted the present data of the flat tube within 20% deviation when effective heat transfer area is used in determining experimental data. This suggests that there is little change in flow characteristics and patterns when the tube diameter is reduced down to 1.4 mm diameter range. Thermal insulation for the outer tube section surrounding the test tube for the transport of heat transfer fluid is very important in fluid heat-ing or cooling type heat transfer experimental apparatus.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.109-112
• /
• 2015

The Korean electric railway is growing rapidly such as speed of 300km/h in high speed section and 230km/h in the conventional railway section. But, power supply failure occurs because of loss of contact, defective catenary system and high speed vehicle. Therefore preventive maintenance way based reliability has been applied. Typical example is the facility inspection method using trolley inspection system. But it is required differentiated inspection method to prevent problem such as inspection errors. In this paper, a study on the trolley sliding condition inspection system using monitoring techniques is performed for performance enhancement of inspection system. It proposed the efficient maintenance method through monitoring the deviation and height of contact wire after installing inspection system on the top of train which operates in the metropolitan area. Inspection errors were decreased by virtually monitoring the video of faulty facilities. Also those facilities were identified through the impact sound analysis and tests at the main catenary section.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권1호
• /
• pp.55-65
• /
• 2005

Most patients with temporomandibular disorder can be treated conservatively. However, open TMJ surgery can be needed in some patients. We analysed the patients with TMD which open surgery has performed since 1998. Open surgery was carried out in 8 patients. Age ranged from 22 to 61 years, with a mean of 42.8years. All patients were male. Final diagnosis was obtained based upon clinical, radiographic and operative finding as follows; habitual luxation, bony ankylosis, traumatic arthritis, disc displacement with destructive change, disc displacement and adhesion. Etiologic factors included trauma(4), infection(2), and unknown(2). Open surgery included arthroplasty with either of condylectomy, eminectomy, meniscoplasty, capsurrohaphy. All patients were recovered uneventfully without severe complications. Some mouth opening limitation and mouth opening deviation remained. Postoperative aggressive physical therapy and careful follow up were performed. In conclusion, open TMJ surgery must be considered in organic disease such as ankylosis, tumor and TMD without favorable recovery after long-term conservative therapy.

• 대한치과보철학회지
• /
• 제58권1호
• /
• pp.35-41
• /
• 2020

구치부 지지소실과 편측 저작으로 교합이 환자는 불안정한 하악운동을 보이며, 이는 고령의 환자에서 복잡하게 나타날 수 있다. 본 증례에서는 교합붕괴와 이상 하악운동(Oral dyskinesia)을 보이는 환자에서 고딕아치 묘기법(Gothic arch tracing)과 스플릿 캐스트법(Split cast technique)을 이용하여 중심위와 습관적 전방 폐구위를 확인하고자 하였다. 이후 교합안정장치 형태의 임시의치를 사용하여 안정된 교합과 재현성 있는 하악운동을 회복하고자 하였고, 설측교합(Lingualized occlusion) 개념을 이용하여 총의치와 국소의치를 제작해 수복하였다.

• Imaging Science in Dentistry
• /
• 제41권2호
• /
• pp.79-84
• /
• 2011

Purpose : The aim of the present study was to investigate the disagreement of cephalometric analysis depending on the reference determination of midsagittal plane on three-dimensional computed tomography. Materials and Methods : A total of 102 young women with class III dentofacial deformity were evaluated using three-dimensional computed tomography. The cranial and facial midsagittal planes were defined and the amounts of jaw deviation were calculated. The amounts of jaw deviation were compared with paired t-test (2-tailed) and Bland-Altman plot was drawn. Results : The landmark tracing were reproducible ($r{\ge}.978$). The jaws relative to the cranial midsagittal plane were 10-17 times more significantly deviated than to the facial midsagittal plane (P<.001). Bland-Altman plot demonstrated that the differences between the amounts of jaw deviation from two midsagittal planes were not normally distributed versus the average of the amounts of jaw deviation from two midsagittal planes. Conclusion : The cephalometric analyses of facial asymmetry were significantly inconsistent depending on the reference determination of midsagittal plane. The reference for midsagittal plane should be carefully determined in three-dimensional cephalometric analysis of facial asymmetry of patients with class III dentofacial deformity.

• 설비공학논문집
• /
• 제17권7호
• /
• pp.649-658
• /
• 2005

Flow condensation heat transfer coefficients (HTCs) of R22, R410, Propane (R290) were measured inside a horizontal 9 hole aluminum multi-channel flat tube. The main test section in the refrigerant loop was made of a 0.53m long multi-channel flat tube of hydraulic diameter of 1.4 mm. Refrigerant was cooled by passing cold water through an annulus surrounding the test section. Data were obtained in qualities of $0.1\~0.9$ at mass flux of $200\~400kg/m^2s$ and heat flux of $7.3\~7.7kW/m^2$ at the saturation temperature of $40^{\circ}C$. All popular heat transfer correlations in single-phase subcooled liquid flow and flow condensation originally developed for large single tubes predicted the present data of the multi channel flat tube within $25\%$ deviation when effective heat transfer area was used in determining experimental data. This suggests that there is little change in flow characteristics and patterns when the tube diameter is reduced down to 1.4 mm diameter range. Hence, a modified correlation based on the present data was proposed which could be applied to small diameter tubes with effective heat transfer area. The correlation showed a mean deviation of less than $20\%$ for all data.

• 대한전자공학회논문지SP
• /
• 제47권5호
• /
• pp.81-88
• /
• 2010

본 논문에서는 실제 방송 환경에 적용 가능한 방송용 음원 모니터링 시스템을 구축하기 위한 사전연구로 방송 오디오 신호로부터 음악신호 구간을 자동으로 검출할 수 있는 시스템을 제안하였다. 음악구간과 비음악구간의 구분을 위한 특징으로는 사람의 음성 발화 특성을 반영하여 에너지 표준편차와 log 에너지 표준편차 그리고 log 에너지 평균 등 3개의 간단한 시간영역 특징들을 사용하였으며 최종 음악신호 구간 판별은 각 에너지 한계값(threshold)을 이용한 Rule-base 분류를 기반으로 하였다. 실제 FM 라디오 방송 신호를 24시간 녹음하여 진행한 모의실험에서 음악구간 인식률은 96%, 비-음악구간 인식률은 87%를 나타내어 방송용 음원 모니터링 시스템의 전처리기로 손색이 없음을 확인할 수 있었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.249-255
• /
• 2005

Flow condensation heat transfer coefficients(HTCs) of R22, R4IO, Propane(R290) were measured inside a horizontal 9 hole aluminum multi-channel flat tube. The main test section in the refrigerant loop was made of a 0.53 m long multi-channel flat tube of hydraulic diameter of 1.4 mm. Refrigerant was cooled by passing cold water through an annulus surrounding the test section. Data were obtained in qualities of 0.1 ${\sim}$ 0.9 at mass flux of $200{\sim}400$ $kg/m^2s$ and heat flux of $7.3{\sim}7.7$ $kW/m^2$ at the saturation temperature of $4^{\circ}C$. All popular heat transfer correlations in single-phase subcooled liquid flow and flow condensation originally developed for large single tubes predicted the present data of the multi channel flat tube within 25% deviation when effective heat transfer area was used in determining experimental data. This suggests that there is little change in flow characteristics and patterns when the tube diameter is reduced down to 1.4 mm diameter range. Hence, a modified correlation based on the present data was proposed which could be applied to small diameter tubes with effective heat transfer area. The correlation showed a mean deviation of less than 20% for all data.