• 제목/요약/키워드: Section Factor

검색결과 1,052건 처리시간 0.024초

Investigation of residual stresses of hybrid normal and high strength steel (HNHSS) welded box sections

  • Kang, Lan;Wang, Yuqi;Liu, Xinpei;Uy, Brian
    • Steel and Composite Structures
    • /
    • 제33권4호
    • /
    • pp.489-507
    • /
    • 2019
  • In order to obtain high bearing capacity and good ductility simultaneously, a structural column with hybrid normal and high strength steel (HNHSS) welded box section has been developed. Residual stress is an important factor that can influence the behaviour of a structural member in steel structures. Accordingly, the magnitudes and distributions of residual stresses in HNHSS welded box sections were investigated experimentally using the sectioning method. In this study, the following four box sections were tested: one normal strength steel (NSS) section, one high strength steel (HSS) section, and two HNHSS sections. Based on the experimental data from previous studies and the test results of this study, the effects of the width-to-thickness ratio of plate, yield strength of plate, and the plate thickness of the residual stresses of welded box sections were investigated in detail. A unified residual stress model for NSS, HSS and HNHSS welded box sections was proposed, and the corresponding simplified prediction equations for the maximum tensile residual stress ratio (${\sigma}_{rt}/f_y$) and average compressive residual stress ratio (${\sigma}_{rc}/f_y$) in the model were quantitatively established. The predicted magnitudes and distributions of residual stresses for four tested sections in this study by using the proposed residual stress model were compared with the experimental results, and the feasibility of this proposed model was shown to be in good agreement.

형상비 4.0이고 축방향철근비 2.36 ~ 4.71%인 팔각형 중공단면 철근콘크리트 기둥의 파괴거동에 관한 실험적 연구 (Experimental Study on the Failure Behavior of RC Octagonal Hollow Section Columns with Aspect Ratio of 4.0 and Longitudinal Steel Ratio of 2.36 ~ 4.71%)

  • 고성현
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권6호
    • /
    • pp.102-111
    • /
    • 2022
  • 본 논문의 목적은 팔각형 중공단면 철근콘크리트 교각의 내진성능을 평가하고 축방향철근비가 파괴거동에 미치는 영향을 분석함에 있다. 축소모형 팔각형 중공단면 기둥 실험체 4개를 제작하여 일정한 축력 하에서 반복 횡하중을 가력하는 실험을 수행하였다. 모든 실험체의 횡방향 나선철근 체적비는 0.206%로 일정하고 축방향철근비는 2.36 ~ 4.71%이다. 파괴거동과 내진성능을 분석하였고 겹침이음 실험체를 제외한 3개의 실험체는 최종단계에서 휨-전단 파괴거동을 보였다. 겹침이음 실험체를 제외한 실험결과에서 변위연성도와 누적 에너지소산 능력이 축방향철근비에 반비례하여 감소하는 경향을 나타내었다.

튀김옥수수의 파열방향 및 튀김형태 결정요인 (Popping Mechanism and Shape Moulding Factor of Popcorn)

  • 김선림;박승의;김이훈
    • 한국작물학회지
    • /
    • 제40권1호
    • /
    • pp.98-102
    • /
    • 1995
  • 튀김옥수수의 popping은 거의 일정한 방향성을 가지고 파열되며 튀김후의 형태도 항상 일정하게 이루어지는 원인을 규명하고자 본 시험을 수행하였다. 시험에 앞서 이와 같은 원인이 과피의 선단부와 기부의 두께 차이에 있기 때문이라는 가정을 설정하고 이를 증명하기 위하여 과피를 각 부위별로 제거처리를 하거나 배를 제거후 popping했을 때 나타낸 반응을 검토한 결과로 얻은 튀김옥수수의 파열방향성 및 튀김후의 형태를 결정하는 요인에 대한 해석은 다음과 같다 1. 기부의 과피는 선단부의 과피보다 유의하게 두꺼웠다. 2. 가열로 종실 내부의 수분압력이 한계에 도달하면 과피가 상대적으로 않은 선단부에서 파열이 이루어지는데, 이때 기부의 과피는 선단부 과피를 끌어당겨주므로(bi-metal 원리) 항상 일정한 파열방향 및 튀김형태로 popping 된다. 3. 기부의 과피를 제기하면 선단부의 과피를 끌어 당겨주는 기부의 중심이 상실되기 때문에 불규칙 한 popping이 이루어 진다. 4. 배를 제거하면 무처리와 같이 일정한파열방향성 및 튀김형태는 유지되나 부피는 적었다. 따라서 배는 기부로 방출되는 수분을 차단하는 역할을 담당하고 있는 것으로 판단되었다. 5. 선단부 과피 및 전과피를 제거하면 모든 수분의 방출이 허용되어 popping이 전혀 이루어지지 않았다. 6. 튀김부피의 변화는 기부과피 제거>무처리>역제거>전과피 제거>선단부 과피제거의 순이었다. 7. 따라서 popping시 일정한 파열방향성 및 튀김형태를 갖게 하는 원인은 선단부와 기부 과피의 두께가 서로 다르기 때문인 것으로 판단되었다.된다.벼 보다는 IR62829A/청청벼 조합이 전당 증가율 및 전분 감소율이 월등히 켰다. 5. 치상후 현미중 a-amylase활성에 있어 1대잡종벼가 양친 및 비교품종보다 활성이 커 잡종강세를 나타내었으며 발아율과 a-amylase 활성과는 고도의 정의 유의상관이 있었다. 6. 파종 10일후 묘의 생육에 있어서도 1대잡종벼가 양친이나 비교품종보다 건물중, 초장 등에서 잡종강세를 나타내었으며 묘의 생육과 a-amylase 활성간에는 유의한 정의상관이 있었다./TEX>, RH 50%)한 벼는 2년반 저장한 벼도 밥맛의 변화가 거의 없었다. 5. 1988년산 및 1989년산 일반계를 10분도와 12분도로 도정하였을 때 도정도에 따른 밥맛의 차이는 없었다.X>$CoO_x$는 $Co_3O_4$로 존재하고, 반응 전의 경우에는 이와는 다른 chemical state를 보여주었다. XRD 및 XPS 결과를 바탕으로, 촉매표면에 존재하는 $Co_3O_4$의 외부표면이 $Co_2TiO_4$$CoTiO_3$ 같은 $CoTiO_x$로 encapsulation되어 있는 모델구조를 제안할 수 있고, 이는 반응시간의 함수로 나타나는 촉매활성에 있어서 전이영역의 존재를 잘 설명할 수 있을 뿐만 아니라, XRD와 XPS에서 얻어진 촉매의 물리화학적인 특성을 잘 반영할 수 있다. 나타냈고, 골격근과 눈 조직에서 피루브산에 대한 LDH의 친화력이 상당히 크므로 LDH가 혐기적 조건에서 효율적으로 기능을 하는 것으로 사료된다.5) and

  • PDF

Estimation of response reduction factor of RC frame staging in elevated water tanks using nonlinear static procedure

  • Lakhade, Suraj O.;Kumar, Ratnesh;Jaiswal, Omprakash R.
    • Structural Engineering and Mechanics
    • /
    • 제62권2호
    • /
    • pp.209-224
    • /
    • 2017
  • Elevated water tanks are considered as important structures due to its post-earthquake requirements. Elevated water tank on reinforced concrete frame staging is widely used in India. Different response reduction factors depending on ductility of frame members are used in seismic design of frame staging. The study on appropriateness of response reduction factor for reinforced concrete tank staging is sparse in literature. In the present paper a systematic study on estimation of key components of response reduction factors is presented. By considering the various combinations of tank capacity, height of staging, seismic design level and design response reduction factors, forty-eight analytical models are developed and designed using relevant Indian codes. The minimum specified design cross section of column as per Indian code is found to be sufficient to accommodate the design steel. The strength factor and ductility factor are estimated using results of nonlinear static pushover analysis. It was observed that for seismic design category 'high' the strength factor has lesser contribution than ductility factor, whereas, opposite trend is observed for seismic design category 'low'. Further, the effects of staging height and tank capacity on strength and ductility factors for two different seismic design categories are studied. For both seismic design categories, the response reduction factors obtained from the nonlinear static analysis is higher than the code specified response reduction factors. The minimum dimension restriction of column is observed as key parameter in achieving the desired performance of the elevated water tank on frame staging.

점토광물 함유량을 고려한 땅밀림 산사태 지역의 전기비저항 자료의 해석 (Interpretation of Electrical Resistivity Tomogram with Contents of Clay Minerals for the Land Creeping Area)

  • 김정인;김지수;이선중;조경서;김종우
    • 지질공학
    • /
    • 제31권2호
    • /
    • pp.187-197
    • /
    • 2021
  • 산사태 연구에서 풍화대 안에 분포하는 점토광물의 함유량은 매우 중요한 요소이다. 산사태 발생과 관련된 지하 구조를 파악하고 미끌림 면을 확인하기 위해 일반적으로 지구물리탐사를 수행하는데 특히 전기비저항 단면이 많이 사용된다. 이 연구에서는 풍화대에 분포하는 카올리나이트와 몬모릴로나이트와 같은 점토광물에 의한 전기전도도의 증가효과(전기비저항의 감소효과)를 해석하기 위해 병렬모델 아치의 방정식을 이용하였다. 점토의 전기전도도는 광물의 종류 및 그 비표면적과 양이온 교환능력에 따라 달라진다. 간극수의 전기비저항이 증가함에 따라 매질의 전체 비저항과 지층인자는 작아지는데 카올리나이트에 비해 몬모릴로나이트가 훨씬 작게 나타난다. 또한 공극률이 커지고, 고결인자가 작아질수록 지층인자가 감소하는 것으로 나타난다. 점토광물에 대한 병렬모델 아치의 방정식을 현장자료에 적용하기 위해 2014년 땅밀림 산사태가 일어난 충남 태안 신진도리에서 수집되어 처리·해석된 전기비저항자료를 사용하였다. 기존의 실험식에서 카올리나이트의 함유량에 따라 결정되는 계수들을 활용하여 풍화대의 전기비저항 값들을 계산하고 이들을 전기비저항 수치모델링에 포함시켰다. 점토 함유량을 변화시켜 만든 여러 개의 이론자료들 중에서 현장자료와 가장 근접하는 모델자료를 선택하여 이에 입력된 점토 함유량 10%를 이 지역의 풍화대에 대한 점토 함유량으로 추정하였다. 땅밀림 연구에서 처음 시도된 전기비저항 자료를 이용한 점토 함유량의 추정기법은 차후 점토 함유량 외에 전기비저항에 영향을 미치는 다른 인자(공극률, 포화도, 간극수의 전기비저항)들에 대한 자료를 확보하고 이들을 수치모델링에 먼저 포함시켜 수행할 때 더욱 그 신뢰성은 더욱 높아질 것으로 기대된다.

Outcome of Febrile Neutropenic Patients on Granulocyte Colony Stimulating Factor in a Tertiary Care Hospital

  • Osmani, Asif Husain;Ansari, Tayyaba Zehra;Masood, Nehal;Ahmed, Bilal
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제13권6호
    • /
    • pp.2523-2526
    • /
    • 2012
  • Introduction: Febrile neutropenia is a relatively frequent event in cancer patients treated with chemotherapy and improvement in absolute neutrophil count (ANC) has been linked directly to improved outcome. Evaluation of granulocyte colony stimulating factors (GCSFs) for treatment has shown reduced incidences of episodes of prolonged neutropenia and protracted hospitalization. To determine absolute neutrophil counts with GCSF in febrile neutropenic cancer patients admitted to a tertiary care centre and to co-relate the improvement in ANC with mortality and hospital discharge. Methods: A prospective cross sectional study was carried at an oncology ward at Aga Khan University hospital from January 2010 to June 2011. All adult patients who were admitted and treated with GCSF for chemotherapy induced febrile neutropenia were included. Multivariable regression was conducted to identify the factors related with poor outcomes. Results: A total of 131 patients with febrile neutropenia were identified with mean age of 43.2 (18-85) years, 79 (60%) being ${\leq}50$. Seventy-five (57%) had solid tumors and 56 (43%) hematological malignancies, including lymphoma. Fifty seven (43.5%) had an ANC less 100 cells/$mm^3$, 34 (26%) one between 100-300 cells/$mm^3$ and 40 (31%) an ANC greater than 300 cells/$mm^3$. Thirty (23%) patients showed ANC recovery in 1-3 days, and 74(56%) within 4-7 days. Thirteen (10%) patients showed no recovery. The overall mortality was 18 (13.7%) patients. The mean time for ANC recovery seen in hematological malignancies was 6.34 days whereas for solid tumors it was 4.88 days. Patients with ANC <100 cells/$mm^3$ were more likely to die than patients with ANC >300 cells/$mm^3$ by a factor of 4.3. Similarly patients >50 years of age were 2.7 times more likely to die than younger patients. Conclusion: Our study demonstrated that use of GCSF, in addition to intravenous antibiotics, in treatment of patients with chemotherapy induced febrile neutropenia accelerates neutrophil recovery, and shortens antibiotic therapy and hospitalization. We propose to risk classify the patients at the time of admission to evaluate the cost effectiveness of this approach in a resource constrained setup.

다변수 Bidirectional RNN을 이용한 표층수온 결측 데이터 보간 (Imputation of Missing SST Observation Data Using Multivariate Bidirectional RNN)

  • 신용탁;김동훈;김현재;임채욱;우승범
    • 한국해안·해양공학회논문집
    • /
    • 제34권4호
    • /
    • pp.109-118
    • /
    • 2022
  • 정점 표층 수온 관측 데이터 중 결측 구간의 데이터를 양방향 순환신경망(Bidirectional Recurrent Neural Network, BiRNN) 기법을 이용하여 보간하였다. 인공지능 기법 중 시계열 데이터에 일반적으로 활용되는 Recurrent Neural Networks(RNNs)은 결측 추정 위치까지의 시간 흐름 방향 또는 역방향으로만 추정하기 때문에 장기 결측 구간에는 추정 성능이 떨어진다. 반면, 본 연구에서는 결측 구간 전후의 양방향으로 추정을 하여 장기 결측 데이터에 대해서도 추정 성능을 높일 수 있다. 또한 관측점 주위의 가용한 모든 데이터(수온, 기온, 바람장, 기압, 습도)를 사용함으로써, 이들 상관관계로부터 보간 데이터를 함께 추정하도록 하여 보간 성능을 더욱 높이고자 하였다. 성능 검증을 위하여 통계 기반 모델인 Multivariate Imputation by Chained Equations(MICE)와 기계학습 기반의 Random Forest 모델, 그리고 Long Short-Term Memory(LSTM)을 이용한 RNN 모델과 비교하였다. 7일간의 장기 결측에 대한 보간에 대해서 BiRNN/통계 모델들의 평균 정확도가 각각 70.8%/61.2%이며 평균 오차가 각각 0.28도/0.44도로 BiRNN 모델이 다른 모델보다 좋은 성능을 보인다. 결측 패턴을 나타내는 temporal decay factor를 적용함으로써 BiRNN 기법이 결측 구간이 길어질수록 보간 성능이 기존 방법보다 우수한 것으로 판단된다.

교통사고심각도 영향요인 분석에 관한 연구 - 곡선부가 포함된 국도를 중심으로 - (Analysis on Factors Affecting Traffic Accident Severity - Case Study : Arterial Included Curve Section -)

  • 박재홍;윤덕근;성정곤
    • 한국안전학회지
    • /
    • 제28권6호
    • /
    • pp.84-89
    • /
    • 2013
  • The main causes of traffic accidents can be classified by 3 factors - human error, vehicle deficiency and road environmental problem and most accidents occurs not only 1 factor but combination of 2 or 3-factors. Among these factors, road environmental factor is the most important factor due to influence the behavior of cars and road users and road environmental factor affects 30% of total accidents approximately. The 5 years traffic accidents data analyzed to verify the accidents severity on Korea National Highways. In order to analyze the severity, Ordered Probit Model was used. As a independent variables of this model the number of lane, neighbor road environments, sight distance, vertical grade, lane width, shoulder width and traffic volume were used and as a dependent variables the minor injuries, serious injuries and fatalities were used. Research results shows that sight distance and lane width are identified as significant factors for the traffic accident severity and lesser sight distance and lane width shows greater traffic accident severity.

항공재료 리벳홀에 인접한 원공결함의 위치에 따른 응력집중계수의 변화와 균열발생거동 (The Variation of Stress Concentration Factor and Crack Initiation Behavior on the Hole Defects Around the Rivet Hole in a Aircraft Materials)

  • 송삼홍;김철웅;김태수;황진우
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.381-388
    • /
    • 2003
  • The material deficiencies in the form of pre-existing defects can initiated cracks and fractures. The stress distribution and fatigue crack initiation life of engineering materials may be associated with the size, the shape and the relative location of defects contained in the component. The objective of this study is to investigate the effect of arbitrarily located hole defect around the rivet hole of a wing section in monolithic aluminum and Al/GFRP laminates under cyclic bending moment during a service load. The stress distribution and the fatigue crack initiation behavior near a rivet hole of on the relationships between stress concentration factor ($K_t$) and relative position of defects were considered. The test results indicated the features of different stress field. Therefore, the stress concentration factor ($K_t$) and the fatigue crack initiation behavior was illustrated different behavior according to each position of hole defect around the rivet hole in monolithic aluminum and Al/GFRP laminates.

  • PDF

임신토끼에 있어서 새로운 Recombinant Human Granulocyte Colony-Stimulating Factor(YHB6211)의 배.태자 발생독성평가 (Developmental Toxicity Study in the Embryos/Fetuses with a Recombinant Human Granulocyte Colony-Stimulating Factor (YHB6211) in Pregnant Rabbits)

  • 황재식;장호송;정은용;이수해;신지순;서동석;신장우;남상윤;김대중
    • Biomolecules & Therapeutics
    • /
    • 제9권4호
    • /
    • pp.311-317
    • /
    • 2001
  • YHB6211, a newly developed recombinant human granulocyte colonystimulating factor, was administered at dose levels of 0, 3, 15, and 75 $\mu$g/kg/day intravenously to the pregnant New Zealand White rabbits (20 rabbits per group) during the organogenetic period, days 6 to 18 of gestation. All dams were subjected to Caesarian section on day 28 of gestation and their fetuses were examined for external, visceral, and skeletal abnormalities. No abnormalities in clinical signs, body weight changes, gross findings, mortality, and external appearance were found in all dams and fetuses exposed to 0, 3, and 15 $\mu$g/kg/day of YHB6211. However, in the group treated with 75 $\mu\textrm{g}$/kg/day of YHB6211, maternal body and uterine weights, fetal body weights and length, and the number of live fetuses were significantly decreased and further fetal mortality was remarkably increased. It is suggested that YHB6211 may have no side effect up to the dose level of 15 $\mu$g/kg/day, and there would be no teratogenicity for fetuses of rabbits up to 75 $\mu\textrm{g}$/kg/day even if it may have some toxic effects over 75$\mu\textrm{g}$/kg/day for dams and fetuses of rabbits.

  • PDF