• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.468-475
• /
• 2007

The Steel deck a structural analysis in head plate form change the objective bridge which it sells it accomplished a detailed structural analysis from the research which it sees and Bulk-head plate it accomplished. The length rib where the fatigue crack which is considerable generally occurs, width rib connection department and the length rib side, the width rib side it compares principal stress in the object and it does to sleep. It applied the grudge element model which it describes consequently after words and a load and a boundary condition and it executed it compared a static test and principal stress. It grasped the stress conduct of the The Steel deck petal which it follows in hand weaving rib affix location and the affix location to sleep in order to analyze a same location Bulk-head the head and comparison considered. From the detailed section which is reinforced with the stress investigation result hand weaving rib of the location which is weak in structural analysis result fatigue crack of form star reinforcement details basic form and Bulk-head the form which is reinforced with the head plate compared to principal stress investigation hour it is judged at the section which separates most.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.13-22
• /
• 2000

In order to resolve the problem of increasing traffic entailed by the economic development, road system is reorganization and new highways are built, and long span bridges over 40m are being constructed in environmental and aesthetic considerations. Most long span bridges that are currently being constructed are in general steel box girder and preflex girder bridges; however these types of breiges are less efficiency than PSC I-type girder bridges in terms of construction cost and maintenance. Therefore, in these study, structural efficiency of PSC I-type girders based on section parameters, concrete compressive strength and other design parameter is observed to develope new PSC I-type girder for long span bridges. As a results of analysis, most important design parameters that control the stress of the girder are found to be the top flange width and the height of girder. In this light, the relationship between the two variables is determined and cross-section details of the girder that most appropriates for the long span bridges are proposed. The use of high strength concrete appears to increase the general design span however the increase rate of the span from increasing concrete ultimate strength appears to be reduced depending on the span. Also, the optimal girder spacing is determined through the parameter studies of design span using the proposed girder.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.539-546
• /
• 2018

Making a transverse opening in concrete beams in order to accommodate utility services through the member instead of below or above of that, sometimes may be necessary. It is obvious that inclusions of an opening in a beam decreases its flexural and shear strengths. Fabricated steel bars are usually used to increase the capacity of the opening section, but details of reinforcements around the opening are dense and complex resulting in laborious pouring and setup process. The goal of this study was to investigate the possibility of using steel fibers in concrete mixture instead of complex reinforcement detailing order to strengthen opening section. Nonlinear finite element method was employed to investigate the behavior of steel fiber reinforced concrete beams. The numerical models were validated by comparison with experimental measurements tested by other investigators and then used to study the influence of fiber length, fiber aspect ratio and fiber content on the shear performance of SFRC slender beams with opening. Finally, it was concluded that the predicted shear strength enhancement is considerably influenced by use of steel fibers in concrete mixture but the effect of fiber length and fiber aspect ratio wasn't significant.

• Composites Research
• /
• 제28권4호
• /
• pp.204-211
• /
• 2015

본 논문에서는 블레이드와 같이 세장비가 크고 초기 비틀림이 존재하는 복합재료로 구성된 날개 구조물에 대한 이차원 단면의 차원축소와 복원관계를 이론적으로 기술하고 이를 이용한 복합재료 로터 블레이드의 효율적인 설계 과정을 기술하였다. 차원축소와 복원해석 수치해석 프로그램인 VABS를 이용하여 단면해석을 수행하고 연성이 고려된 강성행렬과 질량행렬을 중립점에 연결하여 블레이드의 특성을 포함한 1차원 보 모델링을 구성하였다. 1차원 보 모델을 통해 블레이드의 거동을 확인하고 내부하중을 계산하여 단면위치에서 변형률 복원을 수치적으로 계산하고 이산화 된 단면에 수치적으로 매칭하여 시각적으로 형상화하였다.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.135-141
• /
• 2013

PURPOSES : The lack of details of design guideline for zig-zag shaped section approaching central bus stop leads an traffic accident proneness. So, this study analysed the geometric elements of central bus stop area in terms of vehicle dynamics and suggested design alternatives. METHODS : The study analysed a dynamic behaviour of bus moving in and out of zig-zag shaped section using Auto-Turn under scenarios. Based upon dynamic analysis, the study found out the width of overtaking lane is the most influential factor for a safe moving at zig-zag alignment. RESULTS : The width of overtaking lane at design speed of 40, 50, and 60 km/h respectively was suggested given taper ratio of 1 to 10 required for Bus Rapid Transit (BRT), and the lane width is not wider than 4.0m which possibly makes two vehicles using the same lane. Also, the width of overtaking lane which mitigates the taper ratio was suggested with the same restriction about the maximum lane width. CONCLUSIONS : The results of the study can be used to prepare a design guideline on zig-zag shaped alignment of central bus exclusive lanes. The more stable moving is expected by applying the design alternatives suggested, therefore the lower rate of traffic crashes at the vicinity of central bus stops.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4125-4133
• /
• 2023

The transportation of spent nuclear fuel is an important process that involves road and sea transport from an interim storage facility to storage and final disposal sites. As spent nuclear fuel poses a significant risk, carefully evaluating its vibration and shock characteristics under normal transport conditions is essential. In this regard, full-scale multi-modal transport tests (MMTT) have been conducted domestically and internationally. In this paper, we discuss the process of developing a multi-body dynamics (MBD) model to analytically simulate conditions that cannot be considered in tests. The MBD model is based on the KORAD-21 transportation system was validated using the Korean MMTT results from 2020 to 2021. This paper summarizes the details of the development and verification of the MBD model for the KORAD-21 transportation system under normal transport test conditions. This approach can be applicable to various transportation scenarios and systems, and the results of this study will help to ensure that nuclear fuel transportation is conducted safely and effectively.

• 한국항행학회논문지
• /
• 제19권5호
• /
• pp.395-402
• /
• 2015

본 논문에서는 간접낙뢰로 인한 항공기 탑재 컴퓨터의 손상을 보호하기 위한 간접낙뢰 보호장치의 설계 내용 및 시험 과정을 소개한다. 낙뢰로부터 유도된 서지 전압은 항공기 전기 전자장비의 기능 장애나 손상을 가져오는데 이것을 낙뢰의 간접영향이라 한다. 이러한 항공기의 낙뢰 간접영향으로부터 항공전자 장비를 보호하기 위해서는 항공기에 가해진 낙뢰로 인한 영향성을 분석하고 이에 따른 보호 설계를 각각의 장비에 적용한다. 본 논문에서는 보호대상 장비의 간접낙뢰로 인한 손상을 방지하기 위하여 수행한 RTCA DO-160G Section22의 카테고리 분석과 선정을 통한 간접낙뢰 수준 결정, 선정된 레벨에 따른 보호회로 설계 방법을 소개한다. 또한 설계된 보호회로의 유효성 확인을 위해 수행한 낙뢰 간접영향 검증시험 결과를 보인다.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1764-1769
• /
• 2014

본 논문에서는 기존의 단일대형강관 타워의 일부를 복수의 강관으로 대체한 멀티기둥-단일대형강관 하이브리드형식 풍력타워의 적용성을 평가하기 위하여 연결부의 성능을 수치해석적으로 평가하였다. 연결부의 형태는 멀티기둥의 단일대형강관 단부 관통 여부, 멀티기둥 하단부 날개 보강재의 유무 및 단일대형강관 내부 가로보 배치형식으로 구분하였다. 해석은 응력집중을 평가하기 위한 선형탄성해석과 극한강도을 평가하기 위한 재료 및 기하비선형 해석이 수행되었다. 수직력과 수평력에 대한 구조성능 분석 결과, 가로보 배치형식과 날개 보강재는 타워 구조계의 극한강도에 민감하게 영향을 주는 것으로 확인되었다.

• 한국지진공학회논문집
• /
• 제8권3호
• /
• pp.87-96
• /
• 2004

최근에 수행된 보 플랜지 절취형 (Reduced Beam Section, RBS) 내진 철골모멘트접합부의 실험 결과에 의하면, 보 웨브를 볼트 접합한 시험체는 보 웨브를 용접 접합한 시험체에 비해서 조기에 스캘럽을 가로지르는 취성파단이 발생하는 열등한 내진성능을 보였다. 실험결과에 의할 때, 이러한 접합부 취성파괴가 발생하는 주요 원인은 웨브 볼트의 슬립과 고전 휨이론에 의한 예측과는 전혀 다른 응력 전달메카니즘에 의한 스캘럽 부근의 응력집중 때문으로 사료된다. 이는 고전 휨이론에 기초한 전통적 보 웨브 볼트접합부의 설계법을 재검토할 필요가 있음을 시사하는 것이다. 본 연구를 통하여 고전 휨이론에 기초한 현행의 보 웨브 설계법에 문제가 있음을 지적하였다. 실험 및 해석결과를 바탕으로 RBS 접합부의 실제 응력전달경로에 부합되는 새로운 보 웨브 볼트접합 설계법을 제안하였다.

• 약학회지
• /
• 제4권1호
• /
• pp.50-52
• /
• 1959

In order to know contents of vitamin B$_{12}$ in the fermented foods in Korea, the contents of this vitamin are studied on the following foods; kimchies (pickled vegetables) .................. 39 chukkals (fermented and salted sea foods) ...... 8 fermented soy-bean products .................... 5 the kimchies and fermented soybean products studied in this paper, are from individual homes and chukkals are from markets. The content of vitamin B$_{12}$ is estimated by the microbiological assay method using lactobacillus leichmannii ATCC 7830. Details for assay are indicated in the original part of this paper. The pseudo-vitamin B$_{12}$ substances as thymidine which is active to the growth of lactobacillus leichmannii, are eliminated by the alkali treatment method of sample solution. According to the results as indicated in the table, the following conclusions are summerized; 1. Vitamin B$_{12}$ contents of kimchies for winter season are 1.03 to 1.52 mcg% in average. The hobakk-kimchi which contain the highest content of vitamin B$_{12}$ is not popular one among Korean. 2. Chukkals contain much higher content of vitamin B$_{12}$ varying from 0.91 to 11.10mcg%. 3. The soybean fermented foods, as kanjang, denjang, kochojang, contain lower content of vitamine B$_{12}$ varying from 0.08 to 0.52 mcg% containing higher content of pseudo-vitamin. 4. Based on daily consumption of kimchi in winter season by Chai, the consumption of this vitamin through kimchi is about 3 mcgs daily per capita. This will be a quite source of this vitamin for Korean as vitamin C. as vitamin C.