• 대한간호학회지
• /
• 제50권4호
• /
• pp.631-640
• /
• 2020

Purpose: This study aimed to examine premenstrual symptoms (PMS) of shift nurses and identify the association between PMS, sleep, and occupational stress. Methods: This study was conducted with a secondary data analysis that used data from the Shift Work Nurse's Health and Turnover study. The participants were 258 nurses who were working in shifts including night shifts. PMS, sleep patterns (sleep time and sleep time variability), sleep quality, and the occupational stress of each participant were measured using the Moos Menstrual Distress Questionnaire, a sleep diary, an actigraph, the Insomnia Severity Index, and the Korean Occupational Stress Scale, respectively. Data were analyzed using SPSS 23 and STATA 15.1 to obtain descriptive statistics, Pearson's correlation coefficients, multiple linear regression with generalized estimating equations (GEE) and Baron and Kenny's mediating analysis. Results: The average PMS score, average sleep time, average sleep time variability, average sleep quality score, and average occupational stress score of the participants was 53.95 ± 40.45, 7.52 ± 0.89 hours, 32.84 ± 8.43%, 12.34 ± 5.95, and 49.89 ± 8.98, respectively. A multiple linear regression analysis with GEE indicated that sleep time variability (B = 0.86, p = .001), and sleep quality (B = 2.36, p < .001) had negative effects on nurses' PMS. We also found that sleep quality had a complete mediating effect in the relationship between occupational stress and PMS. Conclusion: These findings indicate that both sleep time variability and sleep quality are important factors associated with PMS among shift work nurses. To improve shift nurses' PMS status, strategies are urgently needed to decrease sleep time variability and increase sleep quality.

• 보건의료산업학회지
• /
• 제5권2호
• /
• pp.35-51
• /
• 2011

The purpose of this study is to examine relations between the job stress of radiologists, who are serving at secondary medical institutions, and their intent of separation, providing basic information necessary to earlier prevent the separation, improve the quality of radiologists and ensure a more effective personnel management of the professionals. For the purpose, this researcher conducted a structured questionnaire survey of 221 radiologists from Nov 1 to 30, 2010 who were serving at secondary medical institutions located in Busan. Findings of the study can be summarized as follows. 1) The surveyed radiologists were scored 2.82 points in average in terms of job stress. This indicates that they are suffering from job stress higher than moderate. 2) The subjects were significantly different from each other in job stress according to their age, total service period, department where they were serving, satisfaction with their hospital and satisfaction with the foresaid department. 3) The subjects were scored 2.59 points in average in terms of the intent of separation. This indicates that the surveyed radiologists are not so willing to change their job. 4) Those radiologists were significantly different from each other in the intent of separation according to their age, marital status, educational background, average monthly income, total service period, the period of service at a department where they belonged now, position, satisfaction with their hospital and satisfaction with the foresaid department. 5) There were significant correlations between the subjects' job stress and intent of separation.

• Geomechanics and Engineering
• /
• 제14권2호
• /
• pp.195-202
• /
• 2018

Many laboratory experiments on crack propagation under uniaxial loading and biaxial loading have been conducted in the past using transparent materials such as resin, polymethyl methacrylate (PMMA), etc. However, propagation behaviors of three-dimensional (3D) cracks in rock or rock-like materials under tri-axial loading are often considerably different. In this study, a series of true tri-axial loading tests on the rock-like material with two semi-ellipse pre-existing cracks were performed in laboratory to investigate the acoustic emission (AE) characteristics and propagation characteristics of 3D crack groups influenced by intermediate principal stress. Compared with previous experiments under uniaxial loading and biaxial loading, the tests under true tri-axial loading showed that shear cracks, anti-wing cracks and secondary cracks were the main failure mechanisms, and the initiation and propagation of tensile cracks were limited. Shear cracks propagated in the direction parallel to pre-existing crack plane. With the increase of intermediate principal stress, the critical stress of crack initiation increased gradually, and secondary shear cracks may no longer coalesce in the rock bridge. Crack aperture decreased with the increase of intermediate principal stress, and the failure is dominated by shear fracturing. There are two stages of fracture development: stable propagation stage and unstable failure stage. The AE events occurred in a zone parallel to pre-existing crack plane, and the AE zone increased gradually with the increase of intermediate principal stress, eventually forming obvious shear rupture planes. This shows that shear cracks initiated and propagated in the pre-existing crack direction, forming a shear rupture plane inside the specimens. The paths of fracturing inside the specimens were observed using the Computerized Tomography (CT) scanning and reconstruction.

• 한국가스학회지
• /
• 제8권2호
• /
• pp.54-60
• /
• 2004

본 논문은 완전 밀폐방식의 LNG 저장탱크에서 코너 프로텍션과 2차 바닥판에 걸리는 최대 von Mises 응력과 최대 변위량을 유한요소법으로 해석하였다. LNG 저장탱크의 시운전 과정에서 질소가스로 탱크에 채워져 있는 공기를 퍼징하기 위해 코너 프로텍션에 공급할 수 있는 최대 가스압력은 1,500pa이다. 코너 프로텍션과 2차 바닥판에 공급된 가스압력 1,500pa에 의한 구조물 자체의 안전성은 대단히 높다. 그러나, 내부탱크와 같은 $9\%$ 니켈강재로 제작된 코너 프로텍션과 2차 바닥판에 8,475Pa의 높은 가스압력을 공급하면 2차 바닥판에는 833MPa의 최대 von Mises 응력이 걸리고, 1.9m의 대변형이 2차 바닥판의 중심부에서 발생하여 크게 뒤틀리며, 소성변형 또는 파괴가 일어날 수도 있다는 해석결과를 제시하고 있다.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.110-115
• /
• 2011

Numerouslong-term consolidation and secondary compression settlements may occur in Busan clay, which is astructured soft clay and consists of a thick clay deposit. As a surcharge load is applied to soils, soils experience different stress paths with depth. Therefore, it is necessary to study the long-term consolidation behavior of Busan clay considering stress conditions such as OC or NC states. In this study, a series of long-term consolidation tests were performed to investigate the consolidation characteristics of Busan clay for 20 days. The undisturbed clay samples were taken from 3 sites located in the Nakdong River estuary. The results showed that the creep rate of the Busan clay gradually decreased with time, which indicated that the secondary compression settlement decreased with time. In addition, the experimental results for 3 samples showed that the ratios were about 0.0363 and 0.051, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.533-542
• /
• 1999

In this study the flow characteristics of developing turbulent pulsating flows in a square-sec-tional 180。 curved duct are investigated experimentally. The experimental study of air flow in a square-sectional curved duct is carried out to measure axial velocity distribution secondary flow velocity profiles and wall shear stress distributions by using a Laser Doppler Velocimetry system with the data acquisition and processing system of Rotating Machinery Resolver (RMR) and PHASE software at the entrance region of the duct which is divided into 7 sections from the inlet(${{\o}}=0_{\circ}$) to the outlet (${{\o}}=180_{\circ}$) in $30_{\circ}$ intervals. The results obtained from the study are summarized as follows: (1) The time-averaged critical Dean number of turbulent pulsating flow(De ta, cr) is greater than $75{\omega}+$ It is understood that the critical Dean number and the critical Reynolds number are related to the dimensionless angular frequency in a curved duct. (2) Axial velocity profiles of turbulent pulsating flows are of an annular type similar to those of turbulent stead flows. (3) Secondary flows of trubulent pulsating flows are strong and complex at the entrance region. As velocity amplitudes(A1) become larger secondary flows become stronger. (4) Wall shear stress distributions of turbulent pulsating flows in a square-sectional $180_{\circ}$ curved duct are exposed variously in the outer wall and are stabilized in the inner wall without regard to the phase angle.

• 생물환경조절학회지
• /
• 제32권3호
• /
• pp.217-225
• /
• 2023

본 실험은 마이크로웨이브 처리가 상추 유묘의 생육 변화와 이차대사산물 함량의 변화를 알아보고자 수행되었다. 파종 후 3주째 상추 유묘에 2.45GHz 주파수와 200W의 마이크로웨이브를 0, 4, 8 및 12초 동안 처리하고, 4주간 식물공장에서 재배한 후 생육 및 성분 분석을 수행하였다. 지하부와 지상부의 생체중과 건물중, 엽면적, 엽장 및 엽수는 마이크로웨이브 처리시간이 증가할수록 감소하였다. 4초 처리구와 비교하여 12초 처리구에서 chlorophyll a, chlorophyll b 및 총 carotenoids의 함량이 증가되었으며 총 페놀 함량은 감소하였다. 무처리구와 비교하여 8초 처리구에서 총 플라보노이드 함량이 감소하였다. 이러한 결과들은 산화적 스트레스에 의해 이차대사산물 함량이 변화된 것으로 사료된다. 총 플라보노이드 함량을 제외한 이차대사산물 함량은 각 처리구에서 무처리구와 비교하여 유의한 차이가 없었지만, 각 처리구 사이의 유의한 차이는 200W와 2.45GHz의 마이크로웨이브 처리가 4주 후 상추의 이차대사산물 함량에 영향을 줄 수 있다는 것을 시사한다.

• Journal of Microbiology and Biotechnology
• /
• 제17권12호
• /
• pp.2066-2070
• /
• 2007

It was found that Shinorhizobium meliloti hemoprotein (SM) was more effective than Vitreoscilla hemoglobin (Vhb) in promoting secondary metabolites production when overexpressed in Streptomyces lividans TK24. The transformant with sm (sm-transformant) produced 2.7-times and 3-times larger amounts of actinorhodin than the vhb-transformant in solid culture and flask culture, respectively. In both solid and flask cultures, a larger amount of undecylprodigiocin was produced by the sm-transformant. It is considered that the overexpression of SM especially has activated the pentose phosphate pathway through oxidative stress, as evidenced by an increased NADPH production observed, and that it has promoted secondary metabolites biosynthesis.

• 한국전산유체공학회지
• /
• 제8권2호
• /
• pp.8-15
• /
• 2003

Three nonlinear κ-ε models with the wall function method are applied to the fully developed turbulent flow in a triangular subchannel of a bare rod bundle. Typical predicted quantities such as axial and secondary velocities, turbulent kinetic energy and wall shear stress are compared in details both qualitatively and quantitatively with both each other and experimental data. The nonlinear κ-ε models by Speziale[1] and Myong and Kasagi[2] are found to be capable of predicting accurately noncircular duct flows involving turbulence-driven secondary motion. The nonlinear κ-ε model by Shih et aL.[3] adopted in a commercial code is found to be unable to predict accurately noncircular flows with the prediction level of secondary flows one order less than that of the experiment.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1224-1232
• /
• 2014

A full-bridge secondary dual-resonant DC-DC converter using the asymmetrical pulse-width modulated (APWM) strategy is proposed in this paper. The proposed converter achieves zero-voltage switching for the power switches and zero-current switching for the rectifier diodes in the whole load range without the help of any auxiliary circuit. Given the use of the APWM strategy, a circulating current that exists in a traditional phase-shift full-bridge converter is eliminated. The voltage stress of secondary rectifier diodes in the proposed converter is also clamped to the output voltage. Thus, the existing voltage oscillation of diodes in traditional PSFB converters is eliminated. This paper presents the circuit configuration of the proposed converter and analyzes its operating principle. Experimental results of a 1 kW 385 V/48 V prototype are presented to verify the analysis results of the proposed converter.