• Resources Recycling
• /
• v.28 no.3
• /
• pp.3-14
• /
• 2019

Copper is one of the first metals utilized by humankind about 11,500 years ago. But copper is not plentiful metallic element in the earth's crust. Copper has a high thermal and electric conductivity and is relatively corrosion resistant. In principle copper is virtually 100 % recyclable as an element without loss of quality. The recycling of copper scrap reduces the energy consumption and environmental burden, comparing to the primary metal production. Currently, approximately 30% of the global copper supply provides by recycling. Copper scrap is smelted in primary and secondary smelter. Type of furnace and process steps depend on the quality and grade of scrap. Depending on copper content of the secondary raw material, refining is required, which is usually done through electrorefining. This work provides an overview of the primary copper production and recycling process.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.413-418
• /
• 2021

In this study, as a basic study to use recycled limestone powder as a secondary product mixture for concrete, it was found that the compressive and flexural strengths were equal to or slightly improved compared to Plain up to 10% and 20% of the RLP mixing ratio, but the strength was rather decreased at 30% mixing. As a result of the heat of hydration experiment, as the RLP mixing rate increased, the heat of hydration decreased, and the elapsed time of the maximum heat was also delayed. As a result of the drying shrinkage test, as the fine powder RLP filled the internal pores of the cement mortar, the drying shrinkage decreased as the mixing rate increased. The compressive strength, water absorption rate, and compressive strength after freezing and thawing of the concrete block mixed with RLP 20% all satisfied the group standard criteria of the Korea Concrete Industry Cooperative Federation, confirming the possibility of use as a mixed material.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.220-231
• /
• 2023

Although omega-3 fatty acids including docosahexaenoic acid (DHA) contain various health-promoting effects, their poor aqueous solubility and stability make them difficult to be induced in dairy foods. The aims of this research were to manufacture casein derivative-based delivery system using acid-induced gelation method with glucono-σ-lactone and to investigate the effects of production variables, such as pH and charged amount of linoleic acid, on the physicochemical properties of delivery systems and oxidative stability of DHA during storage in model milk. Covalent modification with linoleic acid resulted in the production of casein derivatives with varying degrees of modification. As pH was reduced from 5.0 to 4.8 and the charged amount of linoleic acid was increased from 0% to 30%, an increase in particle size of casein derivative-based delivery systems was observed. The encapsulation efficiency of DHA was increased with decreased pH and increased charged amount of linoleic acid. The use of delivery system for DHA resulted in a decrease in the development of primary and secondary oxidation products. An increase in the degree of modification of casein derivatives with linoleic acid resulted in a decrease in the formation of primary and secondary oxidation products than of free DHA indicating that delivery systems could enhance the oxidative stability of DHA during storage in model milk. In conclusions, casein derivatives can be an effective delivery system for DHA and charged amount of linoleic acid played a key role determining the physicochemical characteristics of delivery system and oxidative stability of DHA.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.319-319
• /
• 2023

Flows of water in the environment (e.g. in a river or estuary) generally occur in complex conditions. This complexity can hinder a general understanding of flows and their related sedimentary processes, such as erosion and deposition. To gain insight in simplified, controlled conditions, hydraulic flumes are a popular type of laboratory research equipment. Linear flumes use pumps to recirculation water. This isn't appropriate for the investigation of cohesive sediments as pumps can break fragile cohesive sediment flocs. To overcome this limitation, the rotating annular flume (RAF) was developed. While not having pumps, a side-effect is that unwanted secondary circulations can occur. To counteract this, the top and bottom lid rotate in opposite directions. Furthermore, a larger flume is considered better as it has less curvature and secondary circulation. While only a few RAFs exist, they are important for theoretical research which often underlies numerical models. Many of the first-generation of RAFs have come into disrepair. As new measurement techniques and models become available, there is still a need to research cohesive sediment erosion and deposition in facilities such as a RAF. New RAFs also can have the advantage of being automatic instead of manually operated, thus improving data quality. To further advance our understanding of cohesive sediment erosion and deposition processes, a large, automatic RAF (1.72 m radius, 0.495 m channel depth, 0.275 m channel width) has been constructed at the Hydraulic Laboratory at Chungnam National University (CNU), Korea. The RAF has the ability to simulate both unidirectional (river) and bidirectional (tide) flows with supporting instrumentation for measuring turbulence, bed shear stress, suspended sediment concentraiton, floc size, bed level, and bed density. Here we present the current status and future prospect of the CNU RAF. In the future, calibration of the rotation rate with bed shear stress and experiments with unidirectional and bidirectional flow using cohesive kaolinite are expected. Preliminary results indicate that the CNU RAF is a valuable tool for fundamental cohesive sediment transport research.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.93-102
• /
• 2023

This study investigated the possibility of treating heavy metal pollutants existing in the air in addition to simultaneously removing NOx and SOx by injecting oxidizing and reducing agents into a scrubber into a microbubble device to create an eco-friendly method that does not generate secondary pollutants. Lead compound (Pb) was selected as the heavy metal substance in the air to be treated with microbubbles, and the removal efficiency was confirmed. By treating microbubbles by connecting them to a scrubber, it was confirmed that not only NOx and SOx but also heavy metal substances in the air were reduced, cost was reduced, and secondary environmental pollutants were not generated. Through this study, it was possible to simultaneously remove NOx, SOx, and heavy metals at low cost by applying an eco-friendly method, rather than the existing high-cost treatment method such as SCR. If oxidizing agent, reducing agent, and microbubbles are used appropriately, economical and efficient air pollution can be achieved. Since material processing was possible, it is expected to be helpful in the technological development of environmental prevention facilities.

• Korean Journal of Plant Resources
• /
• v.37 no.3
• /
• pp.225-234
• /
• 2024

Chinese lobelia (Lobelia chinensis Lour.) is an important medicinal plant that is used in traditional Chinese, Korean, and Japanese medicine. The goal of the current study was to develop an in vitro propagation technique for Lobelia chinensis. We have examined the effects of different media compositions on the regeneration of shoots from nodal cultures of Lobelia chinensis, including Murashige and Skoog (MS), Gamborg (B5), Schenk and Hildebrandt (SH), Woody plant (WPM), Chu (N6), and Nitsch and Nitsch (NLN) media. Similar to this, shoot regeneration was examined using MS medium of double (2.0), full (1.0), half (0.5), and quarter (0.25) strengths. The regeneration of shoots was also examined with additions of 0, 1, 3, 5, and 7% (w/v) sucrose to MS media. For axillary shoot regeneration, full-strength MS medium supplemented with 3% (w/v) sucrose was shown to be the most effective of all the evaluated factors. On this medium, nodal explants optimally regenerated 4.5 shoots per explant and subsequently shoots involved in rooting on the same medium. The regenerated plants possessed abundant phenolics, flavonoids, and DPPH, ABTS, and FRAP antioxidant activities. High performance liquid chromatographic examination (HPLC) of the regenerated plants revealed an accumulation of myricetin and catechin in higher amounts.

• Structural Engineering and Mechanics
• /
• v.76 no.2
• /
• pp.153-162
• /
• 2020

Aiming at the mechanical and structural characteristics of the contact zone composite rock, the shear tests and numerical studies were carried out. The effects of the differences in mechanical properties of different materials and the normal stress on shear properties of contact zone composite samples were analyzed from a macro-meso level. The results show that the composite samples have high shear strength, and the interface of different materials has strong adhesion. The differences in mechanical properties of materials weakens the shear strength and increase the shear brittleness of the sample, while normal stress will inhibit these effect. Under low/high normal stress, the sample show two failure modes, at the meso-damage level: elastic-shearing-frictional sliding and elastic-extrusion wear. This is mainly controlled by the contact and friction state of the material after damage. The secondary failure of undulating structure under normal-shear stress is the nature of extrusion wear, which is positively correlated to the normal stress and the degree of difference in mechanical properties of different materials. The increase of the mechanical difference of the sample will enhance the shear brittleness under lower normal stress and the shear interaction under higher normal stress.

• Ocean and Polar Research
• /
• v.26 no.3
• /
• pp.433-438
• /
• 2004

Stress response to the seawater acclimation in coho salmon (Oncorhynchus kisutch) smolt was investigated. Salt concentration of rearing water was gradually increased for 3 days from freshwater to seawater (30 ppt salt level). The changes of serum concentrations of cortisol as a primary stress indicator, and as secondary indicators, glucose (GLC), lactate (LAC), triglyce.ide (TG), cholesterol (CHOL), sodium ion $(Na^+)$, chloride ion $(Cl^-)$ and enzyme activities (alanine aminotransferase, ALT: aspartate aminotrasferase, AST; lactate dehydrogenase, LDH) were quantified during the acclimation experiment. Among them, cortisol, LAC, TG, CHOL, ALT, AST concentrations showed rapid increase at the first exposure to the 10ppt salt level (day 1), and began to decrease to the constant values after day 2 of adaptation at 20ppt salt level. However, LDH concentration tended to decrease during the whole experimental period. $Na^+\;and\;Cl^-$ showed slight decrease at day 1, and increased to a little bit higher values after day 2 rather than those in freshwater. All the fishes started on taking a food after day 4 of seawater adaptation. From these results, to reduce osmotic shock inducible stress to fish in seawater acclimation, gradual increase of salt levels is recommended.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.97-97
• /
• 2019

Chaga mushroom and Cheonggukjang have been used in alternative medicine. In this study, we determined the anti-obesity effects of fermented Chaga-Cheonggukjang (FCC), an extract prepared by secondary fermentation of a mixture of Cheonggukjang and Chaga by Lactobacillus acidophilus on highfat diet (HFD)-induced mice. Male ICR mice were fed a normal diet or HFD in the presence or absence of 3% and 5% FCC (FCC3 and FCC5). After 3 months, the mice were sacrificed, and serum and tissue samples were examined. Body weight and epididymal fat pad (EFP) weight were significantly lowered in FCC3 and FCC5 groups compared to those in the HFD control group. FCC supplementation suppressed serum triglyceride (TG) and increased serum HDL levels. Serum GOT, GPT, leptin levels and hepatic COX-2 mRNA expression were significantly higher in the HFD groups, and these increases were significantly attenuated by FCC supplementation. FCC suppressed body weight and EFP weight gain, as well as inflammatory responses in the liver in HFD-fed mice. Thus, FCC supplementation may have protective effects for obesity-related disease.

• Resources Recycling
• /
• v.33 no.4
• /
• pp.29-35
• /
• 2024

The recycling of waste resources, such as spent catalysts, primarily involves leaching and extracting metal components via smelting. These metal components are then recovered as salts, such as sulfates and nitrates. When crystallization occurs during the calcination of the recovered salts, the salts are converted into oxides, which are then reduced to form metals or ceramic materials. Common reducing agents used in oxide reduction include hydrogen and carbon, and metal powders are obtained upon reduction. Carbide synthesis can occur if the recycled element is a transition metal and carbon is used as the reducing agent. Despite being ceramic materials, transition metal carbides exhibit excellent conductivity owing to their metallic bonding. Recently, MXene, a two-dimensional transition metal carbide, has gained attention for electromagnetic wave shielding, secondary battery electrodes, and water purification owing to its electrical conductivity and large surface area. This study developed a process for synthesizing high-value MXene materials from waste resources. The properties of these MXenes were evaluated to confirm the potential of using waste resources as raw materials for MXenes.