• Journal of the Korean Solar Energy Society
• /
• v.40 no.5
• /
• pp.23-34
• /
• 2020

Concentrator photovoltaic (CPV) system consists of high-quality complex optical elements, mechanical devices, and electronics components and can have the advantages of high integration and high-efficiency energy sources. III-V compound semiconductor cells have proven performance based on high reliability in the aerospace field, but have characteristics that require absolute support of the balance of systems (BOS) such as solar position trackers, receivers with heat sinks, and housing instruments. To determine the optimum parameters of secondary optical elements (SOEs) design for CPV systems, we designed three types of CPV modules, classified as non-SOEs type, reflective mirror type, and CPC lens type. We measured the I-V and P-V characteristics of the prototype CPV modules with the angle of inclination varying from 0° to 12° and with a 500-magnification Fresnel lens. The experimental results assumed misalignment of the solar position tracker or module design of pinpoint accuracy. As a result, at the 0° tilt angle, the CPC lens produced lower power due to the quartz transmittance ratio compared to that by other SOEs. However, for tilt angles greater than 3°, the CPC lens type module achieved high efficiency and stability. This study is expected to help design high-performance CPV systems.

• The Journal of Korean Physical Therapy
• /
• v.24 no.6
• /
• pp.414-418
• /
• 2012

Purpose: Muscle fatigue affects proprioception, and it causes problems in spinal stability. The purpose of this study was to examine the effect on the accuracy of reproducing the lumbar angles before lumbar exercise and after fatiguing isokinetic lumbar exercise. Methods: Thirty healthy adults participated in this study. Before induction of fatigue by exercise, the proprioception was measured by Biodex. Lumbar positions were passively maintained on stimulation position ($25^{\circ}$ flexion and $25^{\circ}$ extension), and back to the starting position. Subjects actively repositioned the remembered stimulation position, and error degrees between the stimulation position and reposition were measured. Using an isokinetic device at $120^{\circ}$/sec of velocity of angle lumbar flexion/extension exercise resulted in muscle fatigue. The post-fatigue proprioceptive position sense was used in the same way as in pre-fatigue measurement. Results: Means of position sense of pre-fatigue were $2.19{\pm}1.97$ on flexion angle, and $5.04{\pm}2.84$ on extension angle. After exercise induced fatigue, means of position sense were $2.37{\pm}1.83$ on flexion angle, and $4.93{\pm}2.57$ on extension angle. Results of this study showed significant differences of lumbar proprioceptive position sense between pre- and post-fatigue. Conclusion: Lumbar proprioception sense in active repositioning in flexion and extension was affected in the presence of muscle fatigue. Therefore, it should be noted that therapeutic exercise for patients with abnormal proprioceptive sense or elderly people must be performed with care because muscle fatigue can cause secondary damage.

• Journal of Korean Society of Forest Science
• /
• v.80 no.4
• /
• pp.383-392
• /
• 1991

The genetic variation of Pinus densiflora and Pinus thunbergii by Giemsa C-banding was investigated and the results were as follows : 1. From Karyotype analysis of P. densiflora and P. thunbergii by Giemsa C-banding, somatic chromosome numbers of both species were 2n=24. 2. Chromosome of P. densiflora was M-type in arm ratio and they were no variation among individuals but variation in number and position of the secondary constriction and telomere banding among individuals. 3. P. thunbergii showed also M-type in arm ratio of chromosome, however, there was no variation in both number and position of the secondary constriction among individuals. 4. From chromosome C-banding, bands were appeared in the position of centromere and the secondary constriction in both P. densiflora and P. thunbergii. 5. In P. densiflora, the bands were shown on the secondary-constriction in chromosome No. 3, 4 and 7 of all individuals and the bands of the secondary constriction in chromosome No. 1, 2 and 5 showed variation among individuals. In chromosome No. 9, 10 and 11, the bands were shown in telomere and showed variation among individuals. 6. In P. thunbergii, the bands were shown on the secondary constriction in chromosome No. 2, 3, 7 and 8, and were shown no variation among individuals. There was no band on telomere. 7. The genetic variation by C-banding were shown in P. densiflora among individuals but no in P. thunbergii, and were shown on the secondary constriction in chromosome No. 4 of Pinus densiflora and in clnromosome No. 8 of Pinus thunbergii. These are the difference between the two species by C-banding.

• Journal of the Korean Society of Combustion
• /
• v.4 no.1
• /
• pp.1-15
• /
• 1999

In order to analyze the sensitivity on the pulverized coal flames of the several variables, a numerical study was conducted at the gasification process. Eulerian approach is used for the gas phase, whereas lagrangian approach is used for the solid phase. Turbulence is modeled using the standard $k-{\varepsilon}$ model. The turbulent combustion incorporates eddy dissipation model. The radiation was solved using a Monte-Carlo method. One-step two-reaction model was employed for the devolatilization of Kideco coal. In pulverized flame of long liftoff height, the initial turbulent intensity seriously affects the position of flame front. The radiation heat transfer and wall heat loss ratio distort the temperature distributions along the reactor wall, but do not influence the reactor performance such as coal conversion, residence time and flame front position. The primary/secondary momentum ratio affects the position of flame front, but the coal burnout is only slightly influenced. The momentum ratio is a variable only associated with the flame stabilization such as flame front position. The addition of steam in the reactor has a detrimental effect on all the aspects, particularly reactor temperature and coal burnout.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.195-198
• /
• 2002

A positron camera, consisting of a pair of Anger-type scintillation detectors, has been developed for verifying the ranges of irradiation beams in heavy-ion radiotherapy. Images obtained by a centroid calculation of photomultiplier outputs exhibit a distortion near the edge of the crystal plane in an Anger-type scintillation detector. The images of a $\^$68/Ge line source were detected and look-up tables were prepared for the position correction parameters. Asymmetry of the position distribution detected by the positron camera was prevented with this correction. As a result, a linear position response and a position resolution of 8.6 mm were obtained over a wide measurement field.

• Progress in Medical Physics
• /
• v.21 no.4
• /
• pp.311-322
• /
• 2010

In proton therapy, the analysis of secondary particles is important due to delivered dose outside the target volume and thus increased potential risk for the development of secondary cancer. The purpose of this study is to analyze the influence of secondary particles from proton beams on fluence and energy deposition in the presence of inhomogeneous material by using Geant4 simulation toolkit. The inhomogeneity was modeled with the condition that the adipose tissue, bone and lung equivalent slab with thickness of 2 cm were inserted at 30% (Plateau region) and 80% (Bragg peak region) dose points of maximum dose in Bragg curve. The energy of proton was varied with 100, 130, 160 and 190 MeV for energy dependency. The results for secondary particles were presented for the fluence and deposited energy of secondary particles at inhomogeneous condition. Our study demonstrates that the fluence of secondary particles is neither influenced insertion of inhomogeneties nor the energy of initial proton, while there is a little effect by material density. The deposited energy of secondary particles has a difference in the position placed inhomogeneous materials. In the Plateau region, deposited energy of secondary particles mostly depends on the density of inserted materials. Deposited energy in the Bragg region, in otherwise, is influenced by both density of inserted material and initial energy of proton beams. Our results suggest a possibility of prediction about the distribution of secondary particles within complex heterogeneity.

• Microbiology and Biotechnology Letters
• /
• v.38 no.4
• /
• pp.475-480
• /
• 2010

Actinomycetes are Gram-positive soil bacteria and one of the most important industrial microorganisms due to superior biosynthetic capabilities of many valuable secondary metabolites as well as production of various valuable bioconversion enzymes. Among them are cytochrome P450 hydroxylase (CYP), which are hemoproteins encoded by a super family of genes, are universally distributed in most of the organisms from all biological kingdoms. Actinomycetes are a rich source of soluble CYP enzymes, which play critical roles in the bioactivation and detoxification of a wide variety of metabolite biosynthesis and xenobiotic transformation. Cyclosporin A (CyA), one of the most commonly-prescribed immunosuppressive drugs, was previously reported to be hydroxylated at the position of 4th N-methyl leucine by a rare actinomycetes called Sebekia benihana, leading to display different biological activity spectrum such as loss of immunosuppressive activities yet retaining hair growth-stimulating side effect. In order to improve this regio-selective CyA hydroxylation in S. benihana, previously-identified several secondary metabolite up-regulatory genes from Streptomyces coelicolor and S. avermitilis were heterologously overexpressed in S. benihana using an $ermE^*$ promoter-containing Streptomyces integrative expression vector. Among tested, SCO4967 encoding a conserved hypothetical protein significantly stimulated region-specific CyA hydroxylation in S. benihana, implying that some common regulatory systems functioning in both biosynthesis and bioconversion of secondary metabolite might be present in different actinomycetes species.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.4
• /
• pp.401-406
• /
• 1999

Secondary deformities of the lip and nose in individuals with repaired unilateral and bilateral clefts may vary in severity, depending on the state of the original defect, the care taken in the initial surgical procedure, the pattern of the patient's facial growth, and the effectiveness of interceptive orthodontic technique. Because each patient has a unique combination of deformities, their surgical reconstruction usually requires the modification and combination of several surgical techniques. Residual lip deformities after primary repair may be esthetic or functional and include scars, skin shortage or excess(vertical and transverse), orbicularis oris muscle malposition or diastasis. The key to accurate repair of secondary cleft lip deformities is a precise diagnosis. This requires observation of the patient in animation and repose. The quality of the scar is not the only factor determining the overall appearance of the lip. Observing the patient in the animated position is critical to assess muscular function. Factors that require precise analysis include lip length, the appearance of the Cupid's bow and philtrum, and nasal symmetry. Only after this detailed analysis can a decision be made as to wether a major or minor deformity exists. We report successful cases using various techniques for the secondary lip deformities.

• Laser Solutions
• /
• v.16 no.3
• /
• pp.11-21
• /
• 2013

As parts are becoming more complex and smaller with the development of new materials, high-quality laser precision processing is getting the limelight. Laser enables quick processing and less deformation of materials. It also enables welding with diverse materials. In this study, the pole rod and tap for the secondary battery were laser-welded using cross and coaxial nozzles. The results of the comparative analysis of cross and coaxial nozzles according to the processing parameters showed that the coaxial nozzle had more sensitive welding characteristic to the nozzle position or pressure than the cross nozzle. This indicated that the processing parameters should be carefully determined for the welding with the coaxial nozzle. The pole rod and tap were welded together in a form of T joint to improve the output of the secondary battery, and the cross nozzle had a better welding characteristic than the coaxial nozzle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.687-694
• /
• 1999

An experimental study was carried out in two laboratory-scale reactors to investigate the effect of heating rate on the behavior of flame front in a pulverized coal flame. Each. reactors had different heating mechanisms. For reactor A losing large heat through transparent quartz wall. pulverized coal particles were ignited by secondary air of 1050K. Flame front could be visualized through the transparent wall. Reactor B was insulated with castable refractory to minimize the heat loss through the reactor wall and accompanied with secondary air of 573K. Flame front was estimated from the gas temperature and species concentration measured using R-type thermocouple(Pt-Pt/Rh 13%) and gas chromatograph at various coal-air ratios and swirl intensities. The flame front position was closely related with the magnitude of heating rate. The heating rate for lifted flame was of the order of $10^4$ to $10^5K/s$ and for coal Ignition at least over $10^4K/s$. The heating mechanism had little impact on the extinction limits. The weak swirl number of 0.68 forced the flame front to move toward the upstream by the rapid mixing of coal and air. The primary/secondary momentum ratio was an inappropriate variable to distinct the liftoff of flame.