• 제목/요약/키워드: Secondary phase control

검색결과 148건 처리시간 0.026초

설비공학 분야의 최근 연구 동향 : 2016년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2016)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제29권6호
    • /
    • pp.327-340
    • /
    • 2017
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

PMSG 반복투여가 Rat의 과배란에 미치는 영향에 대한 면역조직화학적 연구 1. 투여회수에 따른 난포수의 차이 (Immunohistochemical Study on the Superovulation Effected by Repeat of PMSG Administration in Rats 1. The Frequency of PMSG Administrations and Number of Follicles)

  • 곽수동
    • 한국가축번식학회지
    • /
    • 제21권3호
    • /
    • pp.255-264
    • /
    • 1997
  • The purpose of this study was attempted to investigate the number changes of the growing and mature follicles in ovary following repeats of pregnant mare serum gonadotropin(PMSG) treatments for superovulation in nulliparous rats. Thirty two rats(Sprague-Dawely, about 200~250 gm) were randomized into 4 groups. Control group rats were sacrified at estrus phase confirmed by vaginal smear. PMSG-treated group 1 rats, PMSG-treated group 2 rats and PMSG-treated group 3 rats were sacrified at 48 hrs after injection once with PMSG 25 IU, after 2 repeated injection by a week interval, and 3 repeated injection, respectively. The uteri and ovaries of rats were removed and weighed and then were observed grossly and serial sections of all ovaries and some sections of uteri by paraffin embedding were stained with H-E. Number of ovarian follicles about 3 grades of small, middle and large follicles from seondary and follicles were investigated by LM photographies of ovary preparations. The criteria of the small, middle, and large follicles were based as small follicle with preantral follicles with 2~4 layers of granulosa cells surrounding the oocyte, as secondary follicles with more than 5 layers of granulosa cells and early signs of antral cavity or with small clefts on either side of the oocytes, and as tirtiary follicles with a single medium sized antral cavity or large well-formed antral cavity, respectively. In gross findings, the wall of the uteri in control group were thin, and those in 3 PMS-treated group were markedly thickened and some uterine lumen of those filled with fluid. In histological findings, the walls of the uteri from 3 PMSG-treated groups were hypertrophied and their blood and lymph vessels were dilated than those of control group. The ovaries fo 3 PMSG-treated groups were more increased in size and the cortexes were more developed and increased in width but there are no difference of development and changes in 3 PMSG-treated groups. The weight of the uteri and ovaries per rat in PMSG -treated group 1, 2 and 3 were a, pp.ared to be significantly increased 171.4$\pm$47.6%, 162.3$\pm$43.9%, 206.9$\pm$30.4%, respectively than those of control groups. The mean number of follicle per ovary in control group were a, pp.ared to be 17.1$\pm$3.5, 46.2$\pm$14.5, and 74.3$\pm$22.7 at large, middle and small follicles, respectively and total number of these 3 grade follicles per ovary were a, pp.ared to be 137.7$\pm$31.7. The mean number of follicle per ovary in PMSG-treated group 1 were a, pp.ared to be 25.6$\pm$7.3, 78.1$\pm$29.9, and 83.2$\pm$34.0, at large, middle and small follicles, respectively and total number of these 3 grade follicles were a, pp.ared to be 187.5$\pm$58.8. The mean number of follicle per ovary in PMS-treated group 2 were a, pp.ared to be 21.9$\pm$5.2, 67.8$\pm$16.8, and 68.0$\pm$14.9 at large, middle and small follicles, respectively and total number of these 3 grade follicles were a, pp.ared to be 157.7$\pm$26.2. The mean number of follicle per ovary in PMS-treated group 3 were a, pp.ared to be 21.7$\pm$4.8, 61.5$\pm$17.0, and 59.7$\pm$16.2 at large, middle and small follicles, respectively and total number of these 3 grade follicles were a, pp.ared to be 143.5$\pm$29.6. The number of follicles in PMSG-treated group 1 a, pp.ared to be more number than other 2 PMSG-treated gruops and tended to be decreased by frequency of PMSG-treatment.

  • PDF

Preoperative short course radiotherapy with concurrent and consolidation chemotherapies followed by delayed surgery in locally advanced rectal cancer: preliminary results

  • Aghili, Mahdi;Sotoudeh, Sarvazad;Ghalehtaki, Reza;Babaei, Mohammad;Farazmand, Borna;Fazeli, Mohammad-Sadegh;Keshvari, Amir;Haddad, Peiman;Farhan, Farshid
    • Radiation Oncology Journal
    • /
    • 제36권1호
    • /
    • pp.17-24
    • /
    • 2018
  • Purpose: This study aimed to assess complications and outcomes of a new approach, that is, combining short course radiotherapy (SRT), concurrent and consolidative chemotherapies, and delayed surgery. Materials and Methods: In this single arm phase II prospective clinical trial, patients with T3-4 or N+ M0 rectal adenocarcinoma were enrolled. Patients who received induction chemotherapy or previous pelvic radiotherapy were excluded. Study protocol consisted of three-dimensional conformal SRT (25 Gy in 5 fractions in 1 week) with concurrent and consolidation chemotherapies including capecitabine and oxaliplatin. Total mesorectal excision was done at least 8 weeks after the last fraction of radiotherapy. Primary outcome was complete pathologic response and secondary outcomes were treatment related complications. Results: Thirty-three patients completed the planned preoperative chemoradiation and 26 of them underwent surgery (24 low anterior resection and 2 abdominoperineal resection). Acute proctitis grades 2 and 3 were seen in 11 (33.3%) and 7 (21.2%) patients, respectively. There were no grades 3 and 4 subacute hematologic and non-hematologic (genitourinary and peripheral neuropathy) toxicities and perioperative morbidities such as anastomose leakage. Grade 2 or higher late toxicities were observed among 29.6% of the patients. Complete pathologic response was achieved in 8 (30.8%) patients who underwent surgery. The 3-year overall survival and local control rates were 65% and 94%, respectively. Conclusion: This study showed that SRT combined with concurrent and consolidation chemotherapies followed by delayed surgery is not only feasible and tolerable without significant toxicity but also, associated with promising complete pathologic response rates.

수치 모사된 뇌우 유출의 구조와 진화 (Structure and Evolution of a Numerically Simulated Thunderstorm Outflow)

  • 김연희;백종진
    • 한국지구과학회지
    • /
    • 제28권7호
    • /
    • pp.857-870
    • /
    • 2007
  • 명시적 액체-얼음상 미시물리 과정을 포함하는 구름 분해 모형(ARPS: Advanced Regional Prediction System)을 이용하여 2차원 그리고 주변 바람이 없는 경우에 뇌우 유출의 구조와 진화를 조사하였다. 고해상도 격자 간격(50m)을 이용하여 유출의 난류 구조를 명시적으로 분해하였다. 모사된 단세포 스톰과 스톰과 연관된 Kelvin-Helmholtz(KH) 빌로우(billow)는 발달, 성숙, 소멸의 생애 단계를 가졌다. 구름 역학과 미시물리 사이의 상호작용으로 야기된 이차 맥동과 대류 세포의 분활이 관측되었다. 상대적으로 건조한 하층 대기를 낙하하는 빗방울과 우박의 증발에 기인한 찬 하강류는 뇌우 찬 공기 유출을 야기시켰다. 유출 머리는 거의 일정한 속도로 이동하였다. KH 불안정에 의해 생성된 KH 빌로우는 유출 상부에서 난류 혼합을 야기하였으며 유출의 구조를 지배하였다. KH 빌로우는 유출 머리에서 생성되었고 돌풍 전선에 상대적으로 뒤쪽으로 이동함에 따라 성장하고 소멸하였다. 가장 빨리 성장하는 섭동의 수평 파장과 임계 시어층 깊이의 비 그리고 KH 빌로우의 수평 파장과 최대 진폭의 비에 대한 수치 모사 결과는 다른 연구 결과와 잘 일치하였다.

태양광 발전에 의한 비접촉 방식 저 전력 에너지 전송회로에 관한 연구 (A Study on Low Power Energy Transfer Circuits of the Non Contact Method by means of Solar Generation)

  • 황락훈;나승권;김종래;최기호;김진선
    • 한국항행학회논문지
    • /
    • 제18권1호
    • /
    • pp.35-43
    • /
    • 2014
  • 본 논문은 무선 전력 전송에 관한 이론을 토대로 송신부와 수신부의 두 개의 평면 코일 사이의 자기 유도 원리의 다양한 조건 변화에 따른 무 접촉 무선 전력 전송에 관한 연구이다. 실험은 무 접촉 방식으로 전력을 전송 할 수 있는 송신부인 1차 측 코일과 수신부인 2차 측 코일 및 하프브리지 직렬 공진 컨버터를 적용한 무선 전원 장치의 송신부 회로와 수신부회로의 출력 전압 및 전원을 계산할 수 있는 환경을 마련해 주었다. 송신부의 유도 결합 공진 컨버터의 주 전원은 태양광 전지 모듈과 대체 광원으로서 인공 광원(할로겐 램프)을 이용하여 전기 에너지로 변환 시켜 사용하였으며 태양광 발전으로부터 공급받은 24 V 전원을 무선 전력 전송 장치를 위한 입력 전원으로 사용하였다. 실험 결과, 전달 받은 전력은 수신부 회로에서 조명을 밝히거나 배터리를 충전하는데 사용된다. 그리고 송신부의 출력 측에서 측정을 통해 수신부의 입력 전력과 비교하여 무선 전력 전송 효율은 약 70~89%로 나타났다. 또한 이 논문을 위해서, 무선 전력 전송 시 이물질이 간섭하였을 때, ID 검증 방식과 전압의 위상차 비교 방법을 통해 효율성 실험을 하였다.

백화사설초의 현탁세포배양에서 Elicitation에 의한 Oleanolic acid 생산성 증대 (Enhanced Production of Oleanolic Acid by the Elicitation in Oldenlandia diffusa Suspension Cell Cultures)

  • 이용일;김동일
    • KSBB Journal
    • /
    • 제19권6호
    • /
    • pp.471-477
    • /
    • 2004
  • 중국의 약용 식물들은 중국에서 전통적으로 많은 질병을 예방하거나 치료하는데 쓰여 왔다. 백화사설초는 항암 활성을 지닌 중국의 약용 식물 중의 하나이다. Triterpenoid 화합물인 oleanolic acid와 ursolic acid는 이성질체이며 백화사설초에 포함되어있다 이들은 간 보호, 항염증, 항암, 항체형성 촉진 등의 효과가 알려져 있다. 유용물질을 생산할 목적으로 식물세포배양을 이용할 경우에는 배양조건을 제어함에 따라 유용물질을 포함한 세포를 효율적으로 얻을 수 있으며 수확도 쉽다. 따라서 백화사설초로부터 현탁세포를 유도하기 위해 기본적인 생장조절제인 2,4-D와 kinetin을 사용하였다. 무균 조건하에서 발아시킨 백화사설초의 잎을 사용하여 0.5 mg/L 2,4-D, 0.1 mg/L kinetin, 30 g/L sucrose가 첨가된 Schenk 및 Hildebrandt 배지에서 캘러스를 처음으로 유도하였다. 백화사설초의 현탁세포 유도와 oleanolic acid의 생산성을 위한 최적의 생장조절제 조건은 0.75 mg/L의 2,4-D와 0.1 mg/L의 kinetin이 첨가된 경우였다. Oleanolic acid가 소수성 물질이라는 것에 착안하여 역상 컬럼을 사용한 HPLC로 분석하였는데, Rexchrom S5-100-ODS column의 분리능이 가장 좋았다. Spectrophotometer와 photodiode array detector를 사용하여 oleanolic acid와 ursolic acid의 최적 UV 파장을 검색한 결과, 200 nm에서 최적의 UV 흡광도가 나타났다. 이동상은 acetonitrile과 water를 80 : 20으로, 유속은 1.0 mL/min로 결정하였다. Oleanolic acid의 생산을 증대시키기 위해 signal transducer와 abiotic elicitor를 배양 6일째 첨가하였고, 배양 10일째 수확하였다. 10 mM의 methyl jasmonate, 0.5 mM의 salicylic acid, 0.1 mM의 vanadyl sulfate를 처리했을 경우, 각각 63.6, 99.6, 67.0 mg/L의 oleanolic acid가 생산되었고, 이것은 control에서 생산된 양 (57.4 mg/L)보다 높았다. 특히, 0.5 mM의 salicylic acid를 처리한 경우는 control에 비해 1.74배로 증가하였다. Methyl jasmonate 100 mM을 배양 6일째 첨가했을 때의 세포생장 변화를 보면, 첨가 후 2일이 지나면서부터 세포의 양이 크게 감소하기 시작하여 첨가 4일 후부터는 변화가 없었다. 따라서 methyl jasmonate를 처리 후 4일이 지나면 세포가 모두 죽는다는 것을 알 수 있었다. Methyl jasmonate 100 mM을 첨가한 후 4일째에 수확한 세포로부터 나온 oleanolic acid의 앙은 5.3 mg/L로 매우 적었다. 반면에 첨가 후 2일째에 수확한 세포로부터 나온 양은 94.1 mg/L로 control (43.4 mg/L)에 비해 2.17배로 증가되었다.

Laparoscopy Assisted versus Open Distal Gastrectomy with D2 Lymph Node Dissection for Advanced Gastric Cancer: Design and Rationale of a Phase II Randomized Controlled Multicenter Trial (COACT 1001)

  • Nam, Byung Ho;Kim, Young-Woo;Reim, Daniel;Eom, Bang Wool;Yu, Wan Sik;Park, Young Kyu;Ryu, Keun Won;Lee, Young Joon;Yoon, Hong Man;Lee, Jun Ho;Jeong, Oh;Jeong, Sang Ho;Lee, Sang Eok;Lee, Sang Ho;Yoon, Ki Young;Seo, Kyung Won;Chung, Ho Young;Kwon, Oh Kyoung;Kim, Tae Bong;Lee, Woon Ki;Park, Seong Heum;Sul, Ji-Young;Yang, Dae Hyun;Lee, Jong Seok
    • Journal of Gastric Cancer
    • /
    • 제13권3호
    • /
    • pp.164-171
    • /
    • 2013
  • Purpose: Laparoscopy-assisted distal gastrectomy for early gastric cancer has gained acceptance and popularity worldwide. However, laparoscopy-assisted distal gastrectomy for advanced gastric cancer is still controversial. Therefore, we propose this prospective randomized controlled multi-center trial in order to evaluate the safety and feasibility of laparoscopy assisted D2-gastrectomy for advanced stage gastric cancer. Materials and Methods: Patients undergoing distal gastrectomy for advanced gastric cancer staged cT2/3/4 cN0/1/2/3a cM0 by endoscopy and computed tomography are eligible for enrollment after giving their informed consent. Patients will be randomized either to laparoscopyassisted distal gastrectomy or open distal gastrectomy. Sample size calculation revealed that 102 patients are to be included per treatment arm. The primary endpoint is the non-compliance rate of D2 dissection; relevant secondary endpoints are three-year disease free survival, surgical and postoperative complications, hospital stay and unanimity rate of D2 dissection evaluated by reviewing the intraoperative video documentation. Discussion: Oncologic safety is the major concern regarding laparoscopy-assisted distal gastrectomy for advanced gastric cancer. Therefore, the non-compliance rate of clearing the N2 area was chosen as the most important parameter for the technical feasibility of the laparoscopic procedure. Furthermore, surgical quality will be carefully reviewed, that is, three independent experts will review the video records and score with a check list. For a long-term result, disease free survival is considered a secondary endpoint for this trial. This study will offer promising evidence of the feasibility and safety of Laparoscopy-assisted distal gastrectomy for advanced gastric cancer. Trial Registration: NCT01088204 (international), NCCCTS-09-448 (Korea).

하수처리장 내 나노 TiO2 입자 제거효율 예측을 위한 물질흐름모델 개발 (Development of A Material Flow Model for Predicting Nano-TiO2 Particles Removal Efficiency in a WWTP)

  • 반민정;이동훈;신상욱;이병태;황유식;김극태;강주현
    • 한국습지학회지
    • /
    • 제24권4호
    • /
    • pp.345-353
    • /
    • 2022
  • 산업과 생활환경에서 사용된 공학적 미세입자는 결국 하수처리장을 거쳐 수계로 배출되므로 미세입자의 수계 배출 제어에 매우 중요한 역할을 담당하고 있다. 그러나 다수 연구에서 하수처리장 유출수 내 미세입자의 농도가 무영향관찰농도(No Observed Effective Concentration, NOEC)를 빈번히 초과하고 있는 것으로 보고되고 있어 전통적인 하수처리 기능과 더불어 미세입자를 보다 효과적으로 제어할 수 있도록 하수처리장의 설계와 운영을 최적화시킬 필요가 있다. 이를 위해서는 하수처리장 내 단위공정별 특성 및 운전조건에 따른 미세입자의 거동특성과 제거효율에 대한 예측이 선행되어야 한다. 이에 본 연구에서는 하수처리장 내 각 공정 특성별 및 주요 운전조건의 영향에 따른 미세입자 제거효율예측을 위한 모델을 개발함으로써 하수처리장에서 미세입자를 보다 효율적으로 제어하기 위한 도구를 제공하고자 하였다. 개발 모델에서는 수처리 계통에서의 4개 단위공정(1차침전지, 생물반응조, 2차침전지, 및 총인처리시설)을 고려하고, 슬러지처리 계통은 농축, 소화, 탈수 공정 등의 다중 공정을 통합한 단일 공정으로 모의한다. 모의 대상 미세입자는 TiO2 (nano-TiO2)로서, 수중에서의 용해와 변환은 미미하므로 부유성 고형물과의 부착 기작만을 고려하였다. 부유성고형물에의 nano-TiO2 부착 기작은 고-액상 간 평형가정에 기반한 겉보기분배계수(Kd)를 매개변수로 반영하였으며 정상상태에서의 미세입자의 농도 및 부하를 공정별로 계산할 수 있도록 하였다. 아울러 개발 모델 구동의 편의를 위하여 MS 엑셀기반 사용자 인터페이스를 제작하였다. 개발 모델을 이용하여 주요 운전인자인 고형물체류시간(Solid Retention Time, SRT)이 nano-TiO2 제거효율에 미치는 영향을 파악하였다.