• Title/Summary/Keyword: Secondary current

Search Result 1,570, Processing Time 0.036 seconds

A Study on the Way to Improve the Environmental Education of Elementary and Secondary School in Seoul for a Sustainable Development (지속가능 발전을 위한 서울특별시 초.중등학교 환경교육 개선 방안 연구)

  • Park, Tae-Yoon;Noh, Kyung-Im
    • Hwankyungkyoyuk
    • /
    • v.22 no.1
    • /
    • pp.110-119
    • /
    • 2009
  • To promote environmental education of elementary and secondary school in Seoul for a sustainable development, researchers investigated and analysed the current situation of formal and non-formal environmental education in Seoul as well as their major problems. Based on these current situation and problems, the way to improve the environmental education of elementary and secondary school in Seoul was described. The final section deals with specific recommendations to accomplish the improvement of environmental education of elementary and secondary school in Seoul for a sustainable development as follows: 1) Integration of formal and non-formal environmental education system, 2) Establishment and operation of a regional environmental education center for community, 3) International cooperation, and 4) To provide high quality environmental education programs.

  • PDF

Characteristics of Hybrid-Type SFCL by the Number of Secondary Windings with YBCO Films (2차회로의 수에 따른 하이브리드형 초전도 한류기의 동작 특성)

  • Cho Yong-Sun;Choi Hyo-Sang;Park Hyoung-Min
    • The Transactions of the Korean Institute of Electrical Engineers A
    • /
    • v.55 no.2
    • /
    • pp.62-66
    • /
    • 2006
  • We investigated the characteristics of the hybrid-type superconducting fault current limiter (SFCL) by the number of secondary windings. The SFCL consists of a transformer, which has a primary winding and several secondary windings with serially connected $YB_{a2}Cu_{3}O_{7}$ films. In order to increase the capacity. of the SFCL, the serial connection between each current limiting unit is necessary. Resistive-type SFCL has a difficulty in quenching simultaneously between the units due to slight differences of their critical current densities. The hybrid-type SFCL could achieve the simultaneous quenching through the electrical isolation and the mutual flux linkage among the units. We confirmed that the capacity of the SFCL could be increased effectively through the simultaneous quenching among the units. In addition, the power burden of the system could be reduced by adjusting the number of secondary windings. We will investigate the method to increase the capacity through serial and Parallel connections among current limiting units.

Secondary Transition Characteristics of Induced Displacement Current (유기된 변위전류의 2차 전이특성)

  • Kim, Sung-Jin;Chang, Hun;Kim, Young-Heun;Choi, Young-I1;Gu, Hal-Bon;Chung, Hun-Sang;Lee, Kyung-Sup
    • Proceedings of the KIEE Conference
    • /
    • 2000.07c
    • /
    • pp.1693-1695
    • /
    • 2000
  • In this paper with deposition 8A5H induce monolayers which has photoisomerization response displacement current was detected by photoisomerization and the amplifier was designed in order to amplify detected displacement current and then secondary current characteristic was measured. The experimental results are as following: In case of ultraviolet(${\lambda}_1$) and visible(${\lambda}_2$) irradiation on 8A5H induce monolayers depositioned on board the peak of current was detected about 9[fA]. Displacement current amplified as secondary transition form was measured but there was any particular reaction for detailed and accurate measurement restruction of the circuit is required.

  • PDF

New Zero-Voltage-Switching Method for High Efficiency Half-Bridge Converter (새로운 영전압 스위칭 방식을 이용한 고효율 하프-브릿지 컨버터)

  • Lee Sung-Sae;Moon Gun-Woo
    • Proceedings of the KIPE Conference
    • /
    • 2006.06a
    • /
    • pp.25-27
    • /
    • 2006
  • This paper proposes a new full ZVS-range asymmetrical half bridge converter. It uses the variable transient current build-up technique with the load variations. The current build-up is accomplished by using the secondary synchronous switch control. Due to the blocking capacitor in secondary side, the voltage applied to leakage inductor varies with the load variations during current build-up period. Therefore, the unnecessary current build-up of leakage inductor current in heavy load condition is prevented and more current build-up in medium and light load condition is achieved for ZVS operation. That is, the variant current build-up with the load variation is accomplished for the ZVS operation. Furthermore, the DC offset of the transformer magnetizing current is also eliminated and the utilization of magnetic core is maximized.

  • PDF

Wave Field Near a Vessel in Restricted Waterway

  • Kim, Chang-Je
    • Journal of Navigation and Port Research
    • /
    • v.35 no.7
    • /
    • pp.557-562
    • /
    • 2011
  • Shipwaves can have harmful effects on people who are using riverside and cause bank erosion, bank structures destruction in restricted waterways. The wave field near a vessel is consisted of a combination of a primary and secondary wave system in a shallow or restricted waterway. The water level depression(squat) and return current beside the hull are called the primary wave system. The secondary wave system, that is the wave height originates from a local disturbance point such as the bow of the ship. This study aims at investigating the characteristics of the wave field around a vessel in a restricted water in relation to navigation experimentally and theoretically. The return current and squat with a correction factor can be newly evaluated and the almost same high-sized wave heights take place on the whole waterway in a restricted water without regard to the distance from the sailing line.

A study on the ZVZCS(Zero-Voltage and Zero-Current-Switching) Full-Bridge converter using the secondary coupled inductor and auxiliary capacitor (2차측 결합인덕터와 보조커패시터를 이용한 영전압?영전류 풀브리지 컨버터에 관한 연구)

  • Kim, Dong-Won;Kim, Yong;Bae, Jin-Yong;Eom, Tae-Min;Lee, Dong-Hyun
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.926-927
    • /
    • 2008
  • This paper presents the ZVZCS(Zero- Voltage and Zero-Current-Switching) Full-Bridge converter using the secondary coupled inductor and auxiliary capacitor. The converter with phase-shift control is proposed to reduce the circulating loss in primary and the voltage stress in secondary side. Using a coupled winding of the output inductor, two auxiliary capacitors are generated to reset the primary current at circulating interval.

  • PDF

A study on the ZVZCS(Zero-Voltage and Zero-Current-Switching) Three-Level converter using the secondary auxiliary circuit (2차측 보조회로를 이용한 ZVZCS Three-Level 컨버터에 관한 연구)

  • Kim, Dong-Won;Kim, Yong;Bae, Jin-Yong;Lee, Eun-Young;Lee, Kyu-Hun
    • Proceedings of the KIEE Conference
    • /
    • 2009.04b
    • /
    • pp.161-164
    • /
    • 2009
  • This paper presents the ZVZCS(Zero Voltage and Zero-Current-Switching) Three-Level converter using the secondary coupled inductor and auxiliary capacitor. The converter with phase-shift control is proposed to reduce the circulating loss in primary and the voltage stress in secondary side. Using a coupled winding of the output inductor, two auxiliary capacitors are generated to reset the primary current at circulating interval.

  • PDF

An Analysis of Oceanic Current Maps of the Yellow Sea and the East China Sea in Secondary School Science Textbooks (중등학교 과학교과서의 황해 및 동중국해 해류도 분석)

  • Park, Kyung-Ae;Park, Ji-Eun;Choi, Byoung-Ju;Lee, Sang-Ho;Lee, Eunil;Byun, Do-Seong;Kim, Young-Taeg
    • Journal of the Korean earth science society
    • /
    • v.35 no.6
    • /
    • pp.439-466
    • /
    • 2014
  • Since the unification of the diverse oceanic current maps of the East Sea in secondary school science textbooks has recently been accomplished, there have been increasing requirements for the production of a current map of the Yellow Sea (YS) and the East China Sea (ECS). This study, as its first attempt, facilitated the prospective production process of the unified oceanic current maps in YS and ECS by analyzing the maps of scientific articles and those of the present textbooks as of 2014. First of all, the analogue current maps of the textbooks and scientific articles were digitalized to retrieve the characteristics of current maps quantitatively and to make intercomparison of the maps. The currents of both YS and ECS such as the Kuroshio Current, the Taiwan Warm Current, the Tsushima Warm Current, the Yellow Sea Warm Current, the Chinese Coastal Current, the Korea Coastal Current, and the Changjiang River Flow were selected and analyzed. We made 18 items to investigate the paths of the currents. Analyses of the oceanic current maps of secondary school science textbooks and scientific articles with respect to the selected criteria revealed that the current maps of the textbooks were considerably different from the up-to-date knowledge of the current maps acquired from the scientific articles. In addition, since the currents of YS and ECS have strong seasonality, we suggest that they should be presented with at least two current maps for summer and winter in the textbooks, which may go through active discussions among experts.

New Three-Level PWM DC/DC Converter - Analysis, Design and Experiments

  • Lin, Bor-Ren;Chen, Chih-Chieh
    • Journal of Power Electronics
    • /
    • v.14 no.1
    • /
    • pp.30-39
    • /
    • 2014
  • This paper studies a new three-level pulse-width modulation (PWM) resonant converter for high input voltage and high load current applications. In order to use high frequency power MOSFETs for high input voltage applications, a three-level DC converter with two clamped diodes and a flying capacitor is adopted in the proposed circuit. For high load current applications, the secondary sides of the proposed converter are connected in parallel to reduce the size of the magnetic core and copper windings and to decrease the current rating of the rectifier diodes. In order to share the load current and reduce the switch counts, three resonant converters with the same active switches are adopted in the proposed circuit. Two transformers with a series connection in the primary side and a parallel connection in the secondary side are adopted in each converter to balance the secondary side currents. To overcome the drawback of a wide range of switching frequencies in conventional series resonant converters, the duty cycle control is adopted in the proposed circuit to achieve zero current switching (ZCS) turn-off for the rectifier diodes and zero voltage switching (ZVS) turn-on for the active switches. Finally, experimental results are provided to verify the effectiveness of the proposed converter.

Characteristics of Hybrid-Type SFCL according to the Parallel Connection of Secondary Windings (2차권선의 병렬연결에 따른 하이브리드형 초전도 한류기의 특성)

  • Hwang, Jong-Sun;Cho, Yong-Sun;Choi, Hyo-Sang
    • Proceedings of the KIEE Conference
    • /
    • 2006.10b
    • /
    • pp.208-211
    • /
    • 2006
  • We have analyzed operating characteristics of hybrid-type superconducting fault current limiter (SFCL) according to the parallel connection of secondary windings with $YBa_{2}Cu_{3}O_{7}$ (YBCO) films. The turn ratio between the primary and secondary windings of each reactor was 63:21. Hybrid-type SFCL using a transformer with parallel reactors could reduce the unbalanced quench caused by differences of the critical current density between YBCO films. We found that hybrid-type SFCL having parallel connection induced simultaneous quench between the superconducting elements. The quench-starting point at this time was almost same. When the applied voltage was 200V, the limiting current in the hybrid-type SFCL with a serial connection was lowered to 34 percent than that in the SFCL with a parallel connection. In the meantime, when the voltage generated in the superconducting elements was the same, the current value in the parallel connection was 60 percent less than in the serial connection. The voltage generated in the primary winding also showed the similar behavior. In conclusion, we found that the fault current was limited more effectively in the SFCL with the serial connection but the power burden of the superconducting elements was reduced in the parallel connection.

  • PDF