• 한국결정성장학회지
• /
• 제28권5호
• /
• pp.206-210
• /
• 2018

에나멜 기법을 활용하여 Ti6Al4V 합금에 두 종류의 생체활성화 유리를 코팅하였다. 재료간의 열팽창계수 차이에 의한 열응력을 줄이기 위해 재료간의 열팽창계수의 차가 $2{\times}10^{-6}/^{\circ}C$ 정도 되도록 생체활성화 유리 조성을 선정하였다. 열팽창계수의 차이에도 불구하고 Ti6Al4V 합금과 코팅 유리간에 확산결합에 의해 양호한 부착이 형성되었음을 FE-SEM과 EDS 분석으로 확인하였다. 의사체액에 담근 후 코팅 표면에 일반적인 생체활성화 유리와 같은 hydroxycarbonate apatite가 형성됨을 FT-IR로부터 확인하였다.

• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.417-423
• /
• 2006

실리카계 메조 물질 MCM-41 지지체 위에 여러 방법으로 aminopropyltrimethoxysilane(APMS)을 표면 기능화 시킨 염기촉매를 제조하였고 표준 염기반응인 Knoevenagel 축합반응을 수행하여 촉매적 활성을 측정하였다. Methyltrimethoxysilane으로 추가 표면처리하거나, APMS를 염소함유 유기실란과 축합하여 2차 아민 형성 후 고정화시킨 MCM-41 촉매(BAPM)를 제조한 결과, MCM-41 표면의 잔류 OH를 제거하고 물과의 수소결합으로 아민 활성점의 기능이 약화되는 것을 억제하여 높은 TON을 얻을 수 있었다. 코팅에 의해 표면에 많은 양의 아민이 고정화된 MCM-41은, 세공 내부의 반응 공간이 줄어들고, 인접한 아민 간의 수소결합으로 인하여 낮은 염기도가 예상되며 촉매 활성도 상대적으로 낮았다. 제조한 촉매 중에는 BAPM이 촉매 활성이 가장 우수하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1323-1328
• /
• 2014

Molecular structures of the various conformational stereoisomers of 2,8,14,20-cyanophenyl pyrogallol[4]arenes 1 were optimized using the mPW1PW91 (hybrid Hartree-Fock density functional) calculation method. The total electronic and Gibbs free energies and the normal vibrational frequencies of the different structures from three major conformations (CHAIR, TABLE, and 1,2-Alternate) of the four stereoisomers [1(rccc), 1(rcct), 1(rctt), and 1(rtct)] were analyzed. The mPW1PW91/6-31G(d,p) calculations suggested that $1(rcct)_{1,2-A}$, 1(rctt)CHAIR, and $1(rtct)_{CHAIR}$ were the more stable conformations of the respective stereoisomers. Hydrogen bonding is the primary factor for the relative stabilities of the various conformational isomers, and maximizing the ${\pi}-{\pi}$ interaction between the cyanophenyl rings is the secondary factor. The calculated IR spectra of the more stable conformers [$1(rctt)_{CHAIR}$, $1(rcct)_{1,2-A}$, $1(rtct)_{CHAIR}$] were compared with the experimental IR spectrum of $1(rtct)_{CHAIR}$.

• 한국정밀공학회지
• /
• 제33권3호
• /
• pp.231-234
• /
• 2016

Pouch film is manufactured by laminating aluminum foil, polyamide film and polypropylene film with an adhesive or extrusion resin. However, a surface treatment is required for the aluminum because bonding does not occur easily between the aluminum foil and the polymer film. Thus, for this study, surface treatment experiments were performed in order to confirm the effect on adhesion strength. First, a variety of surface treatment solutions were coated on aluminum foil, and contact angle and surface morphology analysis was carried out for the surface-treated aluminum. For lamination of the surface-treated aluminum foil with polyamide film, a polyurethane base adhesive was prepared for the adhesive strength test specimens. The adhesive strength between the aluminum foil and the polyamide film of the resulting specimens was measured (UTM). With such an experiment, it was possible to evaluate the effect on adhesive strength of the various surface treatments.

• Korean Chemical Engineering Research
• /
• 제52권2호
• /
• pp.209-213
• /
• 2014

A graft copolymer of poly(vinyl chloride)-g-poly(oxyethylene methacrylate) (PVC-g-POEM) was synthesized via atom transfer radical polymerization (ATRP) and used as a structure-directing agent to prepare $Al@Fe_2O_3$ core-shell nanocomposites through a sol-gel process. The amphiphilic property of PVC-g-POEM allows for good dispersion of Al particles and leads to specific interaction with iron ethoxide, a precursor of $Fe_2O_3$. Secondary bonding interaction in the sol-gel composites was characterized by Fourier transform-infrared (FT-IR) spectroscopy. The well-organized morphology of $Al@Fe_2O_3$ core-shell nanocomposites was observed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Energy dispersive X-ray (EDX) and X-ray diffraction (XRD) were used to analyze the elemental composition and crystallization structure of the composites.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1078-1084
• /
• 2006

Impurity contamination induced by $CF_4\;and\;HBr/Cl_2/O_2$ plasma etching on Si surface was examined by using surface spectroscopes. XPS(x-ray photoelectron spectroscopy) surface analysis showed that F of 0.4 at % exists in the surface layer in the form of Si-F bonding but Br and Cl are below the detection limit $(0.1{\sim}1.0%)$ of the spectroscope. Static-SIMS(secondary ion mass spectrometry) surface analysis showed that the etched Si surface was contaminated with etching gas elements such as H, F, Cl and Br, and they existed to the depth of about $20{\sim}40nm$. The etched Si surface was treated with three different methods that were HF dip, thermal oxidation followed by HF dip and oxygen-plasma oxidation followed by HF dip. They showed an effect in reducing the impurity contamination and the oxygen-plasma oxidation followed by HF dipping method appears to be a little bit more effective.

• Composites Research
• /
• 제15권6호
• /
• pp.24-29
• /
• 2002

전기체 복합재 무인항공기 개발을 위해 기체구조 제작과 관련만 설계시의 고려사항, 복합재 부품제작, 기체조립 업무를 요약하였다. 설계시에 제작요소를 고려하여, 일체성형, 일체접착 및 이차접착 등 복합재의 장점을 지대한 활용하기 위한 구조개념을 반영하였다. 설계된 부품을 성형하기 위만 복합재 부품 제작용 치공구를 설계 제작하였다. 비행체에 요구되는 외형 및 조립 치수 요구조건으로부터 조립치구를 설계하고 검사요구조건을 설정하여 제작에 적용하였다. 이와 같은 일련의 제작과정에 필요한 검사 항목 및 방법을 전용 규격화하여 양산품 품질보증활동에 활용할 수 있도록 기술자료화하였다.

• 전자공학회논문지A
• /
• 제30A권1호
• /
• pp.31-43
• /
• 1993

Thermal behavior and $O_{2}$ plasma effects on residue and penetrated impurities formed by reactive ion etching (RIE) in CHF$_{3}$/C$_{2}$F$_{6}$ have been investigated using X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) techniques. Decomposition of polymer residue film begins between 200-300.deg. C, and above 400.deg. C carbon compound as graphite mainly forms by in-situ resistive heating. It reveals that thermal decomposition of residue can be completed by rapid thermal anneal above 800.deg. C under nitrogen atmosphere and out-diffusion of penetrated impurities is observed. The residue layer has been removed with $O_{2}$ plasma exposure of etched silicon and its chemical bonding states have been changed into F-O, C-O etc.. And $O_{2}$ plasma exposure results in the decrease of penetrated impurities.

• Korean Chemical Engineering Research
• /
• 제43권6호
• /
• pp.691-695
• /
• 2005

종이 필터, 면섬유, 유리섬유 필터 등과 같은 지지체 위에 이차성장 수열합성법에 의하여 제올라이트 박막을 제조하였다. 먼저, 제올라이트 종자로 사용하기 위하여 제올라이트 NaA(${\approx}0.5{\mu}m$)와 silicalite-1(${\approx}0.2{\mu}m$) 결정들을 합성하였고, 이 결정들을 지지체의 표면에 화학결합을 이용하여 부착시켰다. 종자 결정으로 덮힌 지지체 위에 NaA나 silicalite-1 제올라이트 박막이 생성되었으며, 제조된 박막은 주사형 전자현미경으로 관찰하였고, X-ray 회절로 분석하였다.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.106-113
• /
• 2010

The most suitable condition for plasma source ion implantation(PSII) was found based on the study of the characteristics of PSIIed tool and machined surfaces. The depth analysis according to the chemical bonding state of elements and surface component elements through the XPS and SIMS, was conducted to find the improved property of the PSIIed surface. Due to the diffusion of PSII, the nitrogen was found up to a depth of about 150nm according to the supplied voltage and ion implanted time. The deep diffusion by nitrogen caused the surface modification, but the formation of oxide component was found due to the residual gas contamination on the surface. Statistical method of ANOVA was conducted to find the effects of spindle speed and feed rate in interaction for machined surface roughness with PSIIed tools. The surface modification was found largely occurred by the nitrogen implanted surface with 2 hours for 27kV, 35kV and 43kV.