• 한국광학회지
• /
• 제3권3호
• /
• pp.161-166
• /
• 1992

회전하는 거친금속표면에 s-편극된 레이저광을 $-30^{\circ}$로 입시시켜 생긴 후방산란파중 입사광과 동일한 편극을 가지는 후방산란파에 대하여 세기의 시간상관함수 $g_{s}^{(2)}(\tau)$를 측정하였다. 이 과정에서 광전신호로부터 $g_{s}^{(2)}(0)$의 측정을 할 때 수반되는 shot noise의 영향을 제하여 줌으로써 정확한 $g_{s}^{(2)}(0)$ 값을 얻었다. 각 산란각$\theta_{s}$에서$g_{s}^{(2)}(\tau)$는 {1+exp($-\tau^2/\tau_0^2$)}함수와 거의 일치하였는데, 이는 등속으로 회전하는 간유리를 투과하여 형성된 레이저 스펙클의 경우와 같은 결과이다. 또한, 산란각에 따른 $\tau_0$의 분포에서는 $\theta_s=34^{\circ}$에서 예리하게 최대값을 가지는 것이 관찰되었다. 이 연구에서, 다중산란이 10%를 넘는 금속판산란과 다중산란이 무시될 수 있는 간유리판산란이 같은 함수꼴의 세기의 시간상관함수를 갖는다는 사실이 확인되었다.

• 대한수학회지
• /
• 제46권6호
• /
• pp.1243-1254
• /
• 2009

The inverse scattering problem is investigated for some second order differential equation with a nonlinear spectral parameter in the boundary condition on the half line [0, $\infty$). In the present paper the coefficient of spectral parameter is not a pure imaginary number and the boundary value problem is not selfadjoint. We define the scattering data of the problem, derive the main integral equation and show that the potential is uniquely recovered.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1801-1807
• /
• 2001

In multiphase flne the bubble size and velocity. To achieve this, one of approaches is to utilize laser phase-Doppler anemometry. However, it was found that the second order refraction has great impact on PDA sizing method when the relative refractive index of media is less than one. In this paper, the problem of second order refraction is investigated and a model of phase-size correlation to eliminate the measurement errors is introduced for bubble sizing. As a result, the model relates the assumption of single scattering mechanism in conventional phase-Doppler anemometry. The results of simulations based on this new model by using Generalized Lorenz Mie Theory (GLMT) are compared with those based on the conventional method. An optimization method for accurately sizing air-bubble in water has been suggested.

• 한국통신학회논문지
• /
• 제18권10호
• /
• pp.1454-1460
• /
• 1993

근접하고 있는 원통형 유전체 실린더들에 의한 산란전계를 수하였다. 산란체들 사이에서의 다중산란을 도려하고 실린더 표면에 경계조건을 적용하여 반복절차에 의해 산란계수를 계산하였다. M개의 실린더 중 i번째 실린더와 나머지 실린더들 사이에서의 상호영향을 반복절차에 의해 계산하여 i번째 실린더에서의 산란전계를 구하였다. 원통형 실린더가 아닌 임의의 단면을 가지는 실린더형 산란체에 대하서는 반지름이 작은 원통형 실린더들에 의해 모델링을 하였다. 그 실린더들에 의해 만들어지는 무한차원의 식들에 대해 적당한 절단을 하고 계산하여 산란계수의 값을 구할 수 있었다. 얻어진 산란계수에 의해 산란전계를 구하고 기존의 논문결과들과 비교하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.60-68
• /
• 2006

High-frequency bistatic scattering measurements from a corrugated surface were made in an acoustic water tank. First the azimuthal scattering pattern was measured from an artificially corrugated surface which has varying impedance. The corrugated surface was installed both transverse to the direction of incident wave and longitudinal to the direction of incident wave. The angle between the corrugated surface and the direction of the incident wave was about $45^{\circ}$. Second, the scattering strengths were measured from the flat sediment and the corrugated sediment. A critical angle of about $37^{\circ}$ was calculated in the acoustic water tank. The measurements were made at three fixed grazing angles: $33^{\circ}$ (lower than critical angle), $37^{\circ}$ (critical angle), and $41^{\circ}$ (higher than critical angle). The scattering angle and the grazing angle are equal in each measurement. Frequencies were from 50 kHz to 100 kHz with an increment of 1 kHz. The corrugated sediment was made transverse to the direction of the incident wave. The first measurement indicates that the scattering patterns depend on the relations between the corrugated surface and the direction of the incident wave. In the second measurement, the data measured from the flat sediment were compared to the APL-UW model and to the NRL model. The NRL model's output shows more favorable comparisons than the APL-UW model. In case of the corrugated sediment, the model and the measured data are different because the models used an isotropic wave spectrum of sediment roughness in the scattering calculations. The isotropic wave spectrum consists of $w_2$ and ${\gamma}_2$. These constants derived from sediment names or bulk size. The model which used the constants didn't consider the effect of a corrugated surface. In order to consider a corrugated surface, the constants were varied in the APL-UW model.

• 비파괴검사학회지
• /
• 제32권4호
• /
• pp.355-361
• /
• 2012

This paper presents an experimental study on the detection and location of nonlinear scattering source due to the presence of fatigue crack in a laboratory specimen. The proposed technique is based on a combination of nonlinear elastic wave spectroscopy(NEWS) and time reversal(TR) focusing approach. In order to focus on the nonlinear scattering position due to the fatigue crack, we employed only one transmitting transducer and one receiving transducer, taking advantage of long duration of reception signal that includes multiple linear scattering such as mode conversion and boundary reflections. NEWS technique was then used as a pre-treatment of TR for spatial focusing of reemitted second harmonic signal. The robustness of this approach was demonstrated on a cracked specimen and the nonlinear TR focusing behavior is observed on the crack interface from which the second harmonic signal was originated.

• Structural Monitoring and Maintenance
• /
• 제1권2호
• /
• pp.173-182
• /
• 2014

We describe the application of a distributed optical fiber sensor based on stimulated Brillouin scattering, as an integrated system for safety monitoring of railway infrastructures. The strain distribution was measured statically and dynamically along 60 meters of rail track, as well as along a 3-m stone arch bridge. We show that, gluing an optical fiber along the rail track, traffic monitoring can be performed in order to identify the train passage over the instrumented sector and determine its running conditions. Furthermore, dynamic and static strain measurements on a rail bridge are reported, aimed to detect potential structural defects. The results indicate that distributed sensing technology represents a valuable tool in railway traffic and safety monitoring.

• 한국연소학회지
• /
• 제12권1호
• /
• pp.1-10
• /
• 2007

Analytical investigation of acoustic wave scattering from turbulent premixed flames was conducted to evaluate the acoustic energy amplification/damping. Such acoustic energy change is attributed to the acoustic velocity jump due to flame's heat release. Small perturbation method up to second order and stochastic analysis were utilized to formulate net acoustic energy and the energy transfer from coherent to incoherent energy. Randomly wrinkled flame surface is responsible for the energy transfer from coherent to incoherent field. Nondimensional parameters that govern net acoustic energy were determined: rms height and correlation length of flame front, incident wave frequency, incidence angle, and temperature ratio. The dependence of net acoustic energy upon these parameters is illustrated by numerical simulations in case of Gaussian statistics of flame front. Total net energy was amplified and the major factors that affect such energy amplification are incidence angle and temperature ratio. Coherent (incoherent) energy is damped (amplified) with rms height and correlation length of flame front.

• Bulletin of the Korean Chemical Society
• /
• 제12권6호
• /
• pp.682-685
• /
• 1991

Solvent dependence of the static solution properties of a polymer chain was studied by static light scattering technique for polystyrene in three good solvents, toluene, tetrahydrofuran and $CCl_4$. The molecular parameters such as radius of gyration and second virial coefficients of polystyrene are found to be clearly larger in THF than the other two solvents and they are in the order of tetrahydrofuran > toluene > $CCl_4$. The radius of gyration shows the same order while the difference is smaller. Nontheless, the penetration functions are found to have a comparable value about 0.2, which confirms the universality of the penetration function in high expansion regime over different nature of solvents.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.591-602
• /
• 2009

The Compton backscatter technique has been applied to lap-joint in aircraft structure in order to determine mass loss due to exfoliative corrosion of the aluminum alloy sheet skin. The mass loss of each layer has been estimated from Compton backscatter A-scan including the aluminum sheet, the corrosion layer, and the sealant. A Compton backscattering imaging system has been also developed to obtain a cross-sectional profile of corroded lap-splices of aging aircraft using a specially designed slit-type camera. The camera is to focus on a small scattering volume inside the material from which the backscattered photons are collected by a collimated scintillator detector for interpretation of material characteristics. The cross section of the layered structure is scanned by moving the scattering volume through the thickness direction of the specimen. The theoretical model of the Compton scattering based on Boltzmann transport theory is presented for quantitative characterization of exfoliative corrosion through deconvolution procedure using a nonlinear least-square error minimization method. It produces practical information such as location and width of planar corrosion in layered structures of aircraft, which generally cannot be detected by conventional NDE techniques such as the ultrasonic method.