• Journal of Korea Multimedia Society
• /
• v.10 no.9
• /
• pp.1143-1152
• /
• 2007

The objective of this paper is to develop the real time motion recognition method for the rehabilitation program of the people with physical disabilities. Using the infrared ray LED, this method gets the Teal time information of the user's motion and tells the difference between the information we get and the pre-defined information. In order to get the fast recognition and comparison, this method positions the specific coordinates of infrared ray LED in the pre-classified sector which keeps certain distance and angle from the point of origin. The result In our experiment shows the speed over 20 frames per second in every motion, and we are satisfied the rate for the recognition of the motions which is near 98%.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.56-61
• /
• 1997

Lead zirconate titanate (PZT) thin fills were deposited onto the Pt/Ti/SiO2/Si substrate by the pulsed laser deposition with the second harmonic wavelength (532 nm) of Nd:YAG laser. In order to determine the optimum conditions for the film deposition, the phase of the films were investigated as functions of ambient oxygen pressure, substrate temperature, and laser fluence. Also the chemical composition analysis was conducted for the PZT films deposited under various ambient oxygen pressure. When the distance between substrate and bulk PZT target is set to 20 mm, the optimum conditions have been determined to be 3 torr of oxygen pressure, 1.5 J/cm2 of laser fluence, and 823-848(±10) K range of substrate temperature. At these conditions, perovskite phase PZT films were obtained on platinized silicon. The chemical composition of the films is very similar to that of PZT bulk target. The physical structure of the deposited films analyzed by scanning electron microscopy shows a columnar morphology perpendicular to the substrate surface. Capacitance-Voltage hysteresis loop measurements show also a typical characteristics of ferroelectric thin film. The dielectric constant is found to be 528 for the 0.48 μm thickness of PZT thin film.

• Journal of Internet Computing and Services
• /
• v.20 no.1
• /
• pp.39-46
• /
• 2019

This paper investigates the importance of various environmental factors that have a strong influence on strawberry yields grown in greenhouse using the pattern recognition methods. The environmental factors influencing the production of strawberries were six factors such as average inside temperature, average inside humidity, average $CO_2$ level, average soil temperature, cumulative solar radiation, and average illumination. The results of analyzing the observed data using Dynamic Time Warping (DTW) showed that the most significant factor influencing the strawberry production was average soil temperature, average inside humidity, and cumulative solar radiation. Second, the results of analyzing the observed data using Multidimensional Scaling (MDS) showed that the most influential factors on the strawberry yields, such as average $CO_2$ level, average inside humidity, and average illumination were differently given for each farms. However, these results are based on the distance in 3D space and can be deduced from the fact that there is not a large difference between these distances. Therefore, in order to increase the harvest of strawberries cultivated in the farms, it is necessary to manage the environmental factors such as thoroughly controlling the humidity and maintaining the concentration of $CO_2$ constantly by ventilation of the greenhouse.

• Journal of the Korean Society of Visualization
• /
• v.19 no.3
• /
• pp.99-105
• /
• 2021

In this study, the thermal stratification in solar seasonal thermal storage tanks was numerically simulated. The effects of the aspect ratio (AR) and inlet velocity on the thermal stratification in the diffuser type heat storage tank were investigated. The temperature distributions inside the tank were similar with velocity fields. Jet flows from opposite diffusers encountered each other at the tank center region. Thereafter, the downward flows occurred, and this flows strongly affected the thermal stratification. When AR was smaller than 2, these downward flows influenced a further distance and enhanced mixing inside the tank. Thermal stratification was evaluated by thermocline thickness and degree of stratification, and AR of 3 had the highest degree of stratification. The inlet velocity effect was expressed with the ratio (Re/Ri) of Reynolds and Richardson numbers. The second-order approximation was found for the relationship between the thermocline thickness and log Re/Ri.

• Korean Journal of Acupuncture
• /
• v.38 no.4
• /
• pp.290-307
• /
• 2021

Objectives : Perceptual experiences have a causal relationship with reality. If there exists something corresponding to acupoints, there should be perceptual experiences for that something. The purpose of this study is to identify and to analyze the perceptual experiences for acupoints within 『LingShu·BenShu』. Methods : First, we briefly propose a perceptual anatomy in order to describe the perceived human body parts, and their perceived directions and places. Second, we analyze the ways of identifying acupoints in the original text of 『LingShu·BenShu』. Results : From 『LingShu·BenShu』, the procedures of identifying total 64 acupoints were recognized. It was clarified that they are by way of visual and haptic explorations in body regions and partial regions. Conclusions : Perceptual explorations for acupoints follow three major principles: of gradual narrowing down, of determination of direction or place, of relative distance. At the final stages, categories of form and location are encountered by observers. The forms have either concavities or convexities. They are determinate indicators of where acupoints are, while the locations are indetermanate. Haptic forms of acupoints are newly discovered from textual analysis with perceptual anatomy. These properties will shed new light both on study of acupoints and on study of meridians.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.3
• /
• pp.799-807
• /
• 2016

The objective of research was to explore the effects of Kinesic taping treatment on Kayaker's athletic performance and muscle fatigue variable. In order to accomplish such study objective, this study employed 8 ordinary university students and 8 university kayaker's as study subjects. The athletic performance records and blood lactate were analyzed before and after Kinesic taping treatment (KTT). Kinesic taping treatment was applied to the regions of agonist such as vastus medialis muscle, Latissimus dorsi muscle, Trapezius muscle, Biceps brachii muscle, and Triceps brachii muscle, which are major muscles for Kayaker's. Records for rest heart rate, athletic performance and blood lactate were measured upon 200m and 500m distance exercise using kayak ergometer. Data were analyzed by SPSS 19.0 using paired t-test and one-way repeated ANOVA at significant level of a = .05. First, performance records of 200m paddling kayak showed that the ordinary university students had a mean score of 60.13 second before and 58.75 second after kinesic taping treatment. University kayakers had a mean score of 58.75 second before and 53.0 second after kinesic taping treatment. Both groups had significant differences between before and after KTT in the athletic performance. In addition, levels of blood lactate showed that the ordinary university students had a mean score of 5.89mM before and 8.90mM after KTT and university kayaker's had a mean score of 5.79mM before and 8.48mM after KTT. The ANOVA showed that the level of ordinary university students' blood lactate was significantly higher than university kayakers only after KTT. Second, performance records of 500m paddling kayak showed that the ordinary university students had a mean score of 2.90 minute before and 2.77 minute after KTT and university kayaker's had a mean score of 2.30 minute before and 2.20 minute after KTT. Both groups had significant differences between before and after KTT in the athletic performance. Moreover, only university kayaker's had a significantly higher performance record than the counterpart. Levels of blood lactate showed that the ordinary university students had a mean score of 7.71mM before and 8.85mM after KTT and university kayakers had a mean score of 8.09mM before and 8.45mM after KTT. However, such a level of increase had no significant difference between the groups

• Archives of design research
• /
• v.11 no.3
• /
• pp.187-196
• /
• 1998

This study is intended to suggest the method of text arrangement in order to enhance visual perception which would help darify its communication. One hundred subjects without restriction of gender and profession participated in each experiment :their reading time was measured by the 0.01 second. The Analysis of Variance(two-way ANOVA without interaction) was performed for each experiment and the p value was 0.0001 which implies that there was a strong consistency among test results. Based on the first results, it is found that there is a consistent relationship between type size and text line length, and the following discovery was made ; the most effective ratio of type size to line length is approximately 1 :8. Judging from the Second and Third results, it seems that the vertical text arrangement is most efficient for reading regardless of text line length. So to make same rreading direction is more important than to narrow down the eye moving distance between column and column for efficient visual flow. This research supports the view that considering efficient eye movement on text, it is important to understand the mentioned variables that affect visual interpretation.

• Korean Security Journal
• /
• no.62
• /
• pp.277-293
• /
• 2020

The purpose of this study is to select the talented and competent personal caregiver personnel through a professional and rational inspection system, and to provide safer personal care services to the public so that the people who are eligible for service can lead a safe life. The purpose of this study is to cultivate qualified and competent personal guardian personnel and provide professional and stable services to the people so that the people who can use the service can lead a safer life. In order to grow into a system that meets the objectives of the personal guardian qualification screening system, it must be revised and supplemented from various evaluation methods. The improvement measures related to the practical test of the system for qualifying personal guardians are as follows. First, the fitness evaluation items should be added. Second, it is necessary to reestablish the test technology. (Remove technology that causes the second threat) (Adds skills that can be used as civilian status) Third, the fallout and application action must be added. Fourth, evaluation in various starting positions is necessary. Fifth, evaluation should be made by diversifying the distance and direction with the opponent.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.3 no.3 s.3
• /
• pp.11-23
• /
• 2005

This never-ending changes and everlasting challenges under the industrial circumstances induce us to compete against survival or selection. We accordingly need to take steps in order to survive excessive competitions by the various differentiated strategies in Beauty and Cosmetology markets. The purpose of this study aims for making the best use of this actual proof which enables the effective customer management and managerial things of beauty shop through theoretical contemplation in all aspects of managerial beauty shop and the reason why the customers give the second visit(revisit) or choosing the shop again(coming again) by demographic characteristics. The method of this study was surveying 200 re-visited customers at the same beauty shop in GwangJu Metropolitan city for a whole year by questionnaire regarding the correlation between revisiting of the same beauty shop and demographic characteristics. After surveying, we coded these questionnaires finding out its distribution(range) by SPSS statistical package with Frequency Analysis in response to demographic characteristics and also performed ANOVA and Regression. In brief, there is big difference between men and women which explains the second visiting(revisit) originates in technical fact; hair protection. Most women have paid great attention to their hair protection while men mostly have ignored. However, men attached themselves to the hairdressers' appearances and the distance from their house to the beauty shop which did not mean a lot to women. Beside s, there were many differentiation in accordance with marital status, age, education and their business. With this study, we easily generalize the fact that customers revisit a beauty shop not because of beauty shop facilities but because of human interests.?Beautician's service has certain specialties which show the interaction between customer and beautician in the field. Now we can come to this conclusion that we need to endeavor to develop the service spirit and employees' welfare. Their attitudes towards job satisfaction go well with customer ' s satisfaction in this way.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.116-122
• /
• 2014

This study proposes a system reliability analysis of rack storage facilities subjected to forklift colliding events. The proposed system reliability analysis consists of two steps: the first step is to identify dominant failure modes that most contribute to the failure of the whole rack facilities, and the second step is to evaluate the system failure probability. In the first step, dominant failure modes are identified by using a simulation-based selective searching technique where the contribution of a failure mode to the system failure is roughly estimated based on the distance from the origin in the space of the random variables. In the second step, the multi-scale system reliability method is used to compute the system reliability where the first-order reliability method (FORM) is initially used to evaluate the component failure probability (failure probability of one member), and then the probabilities of the identified failure modes and their statistical dependence are evaluated, which is called as the lower-scale reliability analysis. Since the system failure probability is comprised of the probabilities of the failure modes, a higher-scale reliability analysis is performed again based on the results of the lower-scale analyses, and the system failure probability is finally evaluated. The illustrative example demonstrates the results of the system reliability analysis of the rack storage facilities subjected to forklift impact loadings. The numerical efficiency and accuracy of the approach are compared with the Monte Carlo simulations. The results show that the proposed two-step approach is able to provide accurate reliability assessment as well as significant saving of computational time. The results of the identified failure modes additionally let us know the most-critical members and their failure sequence under the complicated configuration of the member connections.