• Journal of Oral Medicine and Pain
• /
• 제46권4호
• /
• pp.125-130
• /
• 2021

Purpose: The dental age estimation of children is performed using dental maturity. Postmortem missing of the anterior teeth or the distortion of image of the anterior teeth in panoramic radiographs can make it difficult to analyze the development of the anterior teeth. This pilot study was conducted to derive a new age estimation method based only on the developmental stage of mandibular posterior teeth. Methods: This study was conducted using panoramic radiographs of 650 subjects aged 3 to 15 years old. The dental developmental stages of the lower left first premolar, second premolar, first molar and second molar were evaluated according to the Demirjian's criteria. The intra-/inter-observer reliability was evaluated, and multiple linear regression analyses were performed including the developmental stage of each tooth as an independent variable. Results: The intra-/inter-observer reliability was 0.9626 and 0.8877, respectively, and showed very high reproducibility. Multiple linear regression analyses were performed for males and females, and the age calculation table was derived by obtaining the intercept and the coefficient according to the development stage of each tooth. The coefficient of determination (r²) of the age calculation method was 0.9634 for male and 0.9570 for female subjects, and the mean difference between chronological age and estimated dental age was -0.42 and -0.21, respectively. Conclusions: This pilot study evaluated the developmental stages of four lower posterior teeth in the Korean group according to Demirjian's criteria, and derived age estimation method. The accuracy was lower than when more teeth were used, but it will be useful to estimate age of children when the anterior teeth are difficult to accurately analyze.

• 대한치과교정학회지
• /
• 제41권3호
• /
• pp.191-199
• /
• 2011

Objective: The purpose of this study was to investigate the stress distribution on the orthodontic mini-implant (OMI) surface and periodontal ligament of the maxillary first and second molars as well as the tooth displacement according to the OMI position in the dragon helix appliance during scissors-bite correction. Methods: OMIs were placed at two maxillary positions, between the first and the second premolars (group 1) and between the second premolar and the first molar (group 2). The stress distribution area (SDA) was analyzed by three-dimensional finite element analysis. Results: The maximal SDA of the OMI did not differ between the groups. It was located at the cervical area and palatal root apex of the maxillary first molar in groups 1 and 2, respectively, indicating less tipping in group 2. The minimal SDA was located at the root and furcation area of the maxillary second molar in groups 1 and 2, respectively, indicating greater palatal crown displacement in group 2. Conclusions: Placement of the OMI between the maxillary second premolar and the maxillary first molar to serve as an indirect anchor in the dragon helix appliance minimizes anchorage loss while maximizing the effect on scissors-bite correction.

• 대한치과교정학회지
• /
• 제27권3호
• /
• pp.515-521
• /
• 1997

하악 좌측 부위 부종을 주소로 내원한 10세 남환이 낭종성 법랑아세포종으로 진단되었다. 외과적 술식으로 조대술을 시행한 후 근심 매복되었던 제1대구치는 helical spring으로 인위적 맹출을 시행한 반면, 심하게 하방 변위되었던 제2소구치는 자연적 맹출을 기대하였다. 비교적 간단한 교정치료와 교합유도에 의해 양호한 영구치 교합이 확립되었다.

• 대한치과교정학회지
• /
• 제44권5호
• /
• pp.229-235
• /
• 2014

Objective: The aim of this study was to assess artifacts induced by metallic restorations in three-dimensional (3D) dental surface models derived by cone-beam computed tomography (CBCT). Methods: Fifteen specimens, each with four extracted human premolars and molars embedded in a plaster block, were scanned by CBCT before and after the cavitated second premolars were restored with dental amalgam. Five consecutive surface models of each specimen were created according to increasing restoration size: no restoration (control) and small occlusal, large occlusal, disto-occlusal, and mesio-occluso-distal restorations. After registering each restored model with the control model, maximum linear discrepancy, area, and intensity of the artifacts were measured and compared. Results: Artifacts developed mostly on the buccal and lingual surfaces. They occurred not only on the second premolar but also on the first premolar and first molar. The parametric values increased significantly with increasing restoration size. Conclusions: Metallic restorations induce considerable artifacts in 3D dental surface models. Artifact reduction should be taken into consideration for a proper diagnosis and treatment planning when using 3D surface model derived by CBCT in dentofacial deformity patients.

• Imaging Science in Dentistry
• /
• 제43권3호
• /
• pp.201-207
• /
• 2013

A 40-year-old man suffered from a repeatedly recurrent desmoplastic ameloblastoma in the right maxillary anterior and premolar regions. During the first visit, the patient was provisionally histopathologically diagnosed with a developmental cyst, and it was confirmed to be unicystic ameloblastoma and resected. Four years later, the lesion recurred, and was diagnosed as a desmoplastic type of ameloblastoma and removed again. Then, 5 years after the second surgery, the lesion recurred again, and was diagnosed as a type containing a follicular pattern, recurrent ameloblastoma. A panoramic radiograph showed a multilocular and mixed radiolucent/radiopaque expansile lesion at the first visit, a unilocular cystic lesion confined to the premolar area at the second visit, and a small soap bubble appearance in the molar area in the final visit. Cone-beam computed tomographic images of the final recurrence of the tumor revealed multiple small cyst-like structures in the right maxillary anterior and posterior regions.

• 대한소아치과학회지
• /
• 제7권1호
• /
• pp.85-93
• /
• 1980

This study was undertaken in order to observe the prevalence of congenital dental anomalies especially that of oligodontia and supernumerary teeth in 1024 children at age from 4 to 14 years, through history taking, oral examinations, roentgenographic observations of subjects, and statistic analysis was made. The following results were obtained: 1. The prevalence of oligodontia in 1024 children was $6.45{\pm}.8$ percent with a total of 122 teeth absent in sixty-six subjects, excluding 3rd molars, and most of children (86.4%) who have congenitally missing teeth showed abscence of one or two teeth individually. 2. The teeth most frequently absent were the mandibular second premolar, maxillary second premolar, maxillary lateral incisor, mandibular central incisor, and mandibular lateral incisor in order. 3. There was no statistically significant difference found in tooth abscence in the following comparisons; .Male vs Female .Bilateral vs Unilateral .Maxilla vs Mandible .Right vs Left 4. The prevalence of supernumerary teeth in 1024 children was $4.79{\pm}.67$ percent with a total of 59 supernumerary teeth in forty-nine subjects, all of children who have supernumerary teeth showed one or two supernumerary teeth individually. 5. Statistically significant difference was found in supernumerary teeth in the comparison of male vs female, and they were more frequent in male.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.

• Imaging Science in Dentistry
• /
• 제40권2호
• /
• pp.59-62
• /
• 2010

Purpose : To investigate and compare the prevalence, size, and location of maxillary sinus septa on panoramic and cone beam computed tomography (CBCT) images. Materials and Methods : Two hundred patients who had taken both panoramic and CBCT images were included. The location of maxillary sinus septa on the panoramic radiographs were recorded and confirmed on the CBCT images. Also the size of septa was measured on the reformatted CBCT images. Results : The prevalence of the patients who had maxillary sinus septa was 51.0% and they showed 179 septa totally. Among them 51.0% of the patients had one septum, 32.4% two septa, 13.7% three, and 2.9% four. The measured heights of the septa were $4.37{\pm}2.87\;mm$, $3.51{\pm}2.47\;mm$, and $3.04{\pm}2.37\;mm$ in the medial, middle, and lateral areas, respectively. It was revealed that 1.0% was located at canine region, 18.0% at first premolar, 25.0% at second premolar, 22.7% at first molar, 19.8% at second molar, and 14.0% at third molar region. Among 213 septa depicted by the panoramic radiographs, only 69.0% were confirmed at the CBCT images. Conclusion : Since various heights and courses of the septa can develop in all parts of the maxillary sinus, adequate assessment of the inner aspect of the maxillary sinus is essential to avoid complications during sinus augmentation procedures. CBCT scanning is the preferred radiographic method for detecting the presence of sinus septa.

• 대한치과교정학회지
• /
• 제42권4호
• /
• pp.207-217
• /
• 2012

Objective: This study aimed to evaluate the effect of an intentionally created socket on bone remodeling with orthodontic tooth movement in rabbits. Methods: Eighteen male rabbits weighing 3.8 - 4.25 kg were used. An 8-mm deep and 2-mm wide socket was drilled in the bone 1 mm mesial to the right mandibular first premolar. The left first premolar was extracted to serve as an extraction socket. A traction force of 100 cN was applied to the right first premolar and left second premolar. Sections were obtained at the middle third of the moving tooth for both the drilled and extraction sockets and evaluated with hematoxylin and eosin staining and immunohistochemical analyses. The amount of tooth movement and tartrate-resistant acid phosphatase (TRAP)-positive cell count were compared between the 2 groups using the Mann-Whitney U test. Results: At week 2, the distance of tooth movement was significantly higher in the intentional socket group (p < 0.05) than in the extraction socket group. The number of TRAP-positive cells decreased in week 2 but increased in week 3 (p < 0.05). However, there were no significant differences between the groups. Furthermore, results of transforming growth factor (TGF)-${\beta}$ staining revealed no significant differences. Conclusions: The intentional socket group showed greater distance of tooth movement than did the extraction socket group at week 2. Osteoclast counts and results of immunohistochemical analyses suggested elevated bone remodeling in both the groups. Thus, osteotomy may be an effective modality for enhancing tooth movement in orthodontic treatment.

• Restorative Dentistry and Endodontics
• /
• 제45권2호
• /
• pp.4.1-4.6
• /
• 2020

Although numerous studies have been conducted on apexification using mineral trioxide aggregate (MTA), direct observation of extracted human teeth after the procedure has been rarely reported. This case report describes a mandibular premolar treated 2.5 years ago and extracted recently for orthodontic treatment. The tubercle of the right mandibular premolar of a 12-year-old boy with dens evaginatus was fractured and the pulp was exposed. The tooth was diagnosed with pulp necrosis and asymptomatic periapical abscess. During the first visit, copious irrigation was performed with 2.5% sodium hypochlorite. Calcium hydroxide paste was placed as an intracanal medicament. The sinus tract had disappeared at the second visit after 3 weeks. MTA was applied on to the bleeding point as a 4-mm-thick layer, followed by a 3-mm-thick gutta-percha filling and resin core build-up. After 2.5 years, the tooth and three other premolars were extracted for orthodontic treatment. The right and left mandibular premolars were scanned with micro-computed tomography to determine the root shape and canal anatomy. Irregular root growth was observed and the root outline of the right mandibular premolar differed from that of the contralateral tooth. Apexification with MTA leads to the formation of roots with irregular morphology, without any pulpal space.