• 한국결정성장학회지
• /
• 제25권6호
• /
• pp.285-289
• /
• 2015

프로브카드의 소형화, 고기능화. 고집화에 따라 고강도 무수축 기판에 레이저 가공 공정을 이용한 미세 홀 천공에 대한 관심이 높아지고 있다. 그린 상태에서 레이저 펀처로 미세 홀을 천공 시 테이퍼 현상이 중요한 공정 문제가 되고 있다. Entrance hole과 exit hole의 크기 차이는 홀 크기가 작을수록 커지고, 홀 크기가 커질수록 작아지는 경향을 나타내었다. 테이퍼 현상을 개선하기 위해 second hole 가공 공정을 적용하였다. 기판의 두께가 $380{\mu}m$인 기판 상에 $80{\mu}m$ 홀 천공시 최적의 second hole 크기를 찾기 위해 $70{\sim}79{\mu}m$ 홀을 천공하였을 경우 $76{\mu}m$와 $77{\mu}m$에서 테이퍼는 11.9 %로 가장 낮게 나타났다. 천공된 무수축 기판을 소결한 후에는 테이퍼가 7 %로 개선되었다. First hole 크기와 비교하였을 때 second hole 크기는 first hole 크기의 약 95~97 % 일 때 테이퍼가 가장 적었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.242-242
• /
• 2009

Fabrication of Anodic aluminum oxide under DC vias condition has been studied. When bias and time of anodic aluminum oxide process change, the hole distance and diameter size change. Comparison of fabricated AAO between AC vias and DC vias condition has been studied in this experiment. The first and second anodization of one aluminum is done by using DC and AC power supplier. And first and second anodization of another aluminum is done by DC power supplier. The size of the aluminum is $1cm{\times}3cm$, and second anodic aluminum oxide process takes about 45min. It is found that the hexagonal shape appears on the surface of the AAO. AC power source can fabricate aao which have a nano hole array. We can see that the hole on the surface of the AC vias has a better rounded hole than DC vias AAO. we need more data so we can get characteristic about AC power generated AAO.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.89-92
• /
• 2001

In this paper, we studied on drilling a microscopic hole of glass using electro-chemical discharge methode. In this research, we fabricated a electro-chemical discharge machine for drilling glass hole. The used parameters to get a fine microscopic hole are the concentration of NaOH solution from 5wt% to 50wt%, the supply voltage from 10V to 40V and the fabricating time from 5 second to 50 second. Also, we used a 0.16mm glass plate. We learned from our experiment that, the fabrication most efficient when supply voltage is 25V-30V and concentration of NaOH solution 35wt% or less.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2001

In this paper, we studied on drilling a microscopic hole of glass using electro-chemical discharge methode. In this research, we fabricated a electro-chemical discharge machine for drilling glass hole. The used parameters to get a fine microscopic hole are the concentration of NaOH solution from 5wt% to 50wt%, the supply voltage from 10V to 40V and the fabricating time from 5 second to 50 second. Also, we used a 0.16mm glass plate. We learned from our experiment that, the fabrication most efficient when supply voltage is 25V-30V and concentration of NaOH solution 35wt% or less.

• Journal of Welding and Joining
• /
• 제8권4호
• /
• pp.76-82
• /
• 1990

Lots of research works have been done to improve the accuracy of the hole drilling method to measure residual stress by many investigators. In this study, first, size effect of specimen was analyzed based on the solution of hole in a strip under tension. If the ratio of hole diameter tothe strip width is less than 0.2, the stress distribution around hold may be given from the solution of hole in an infinite plate. Second, the residual stress above $0.6{\sigma}_y$(yield stress) may be measured less than the actual stress by 10-15 percent. Third, eccentricity of hole relative to the rosette center effects on the accuracy of residual stress measurements by 10 percent. The error due to eccentricity of hole can be corrected by the iteration method or the direct method.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제8권1호
• /
• pp.81-92
• /
• 2004

Muskhelishvili's complex variable method has been applied to derive exact and closed expressions for Gaursat's functions for the first and second fundamental problems of the infinite plate weakened by a curvilinear hole which is conformally mapped on the domain outside the unit circle by means of rational mapping function. The hole having three poles. The previous work of the authers in this domain is considered as special cases of this work.

• Journal of Biosystems Engineering
• /
• 제20권4호
• /
• pp.360-367
• /
• 1995

The effect of air vent holes, stacking methods of boxes and clearance between boxes on static pressure drop, were measured to design of pressure cooling system. Static pressure drops in air vent hole of carton box were measured for different hole opening ratio from 1% to 5%. Static pressure drop was expressed as a function of superficial velocity as second-degree polynomial. At given static pressure in plenum chamber, static pressure drop in boxes was shown as second-degree polynomial of the number of carton box in series stacking method, as first-degree polynomial in height and parallel stacking method. In pressure cooling of 24 boxes of Tsugaru apple, air flow rates through clearance between the boxes were shown 1.27 and 1.65 times than those of through the inside of boxes at the plenum pressure of 10mmAq and 20mmAq, respectively.

• 대한조선학회지
• /
• 제21권1호
• /
• pp.21-34
• /
• 1984

This paper is concerned with the experimental investigation of transverse vibration characteristics in water of rectangular plates having an inner free cutout. Systematic experiments are carried out to investigate effects of the surrounding water on the added mass and the natural frequency of the plates due to the changes of the aspect ratio, hole size and eccentricity. The main subject is the clamped rectangular plate with a circular hole. For the purpose of comparative evaluations, some other common-type boundary conditions and hole shapes such as ellipses and rectangles are also investigated. Some of the results obtain are as follows; 1) For each given aspect ratio of the plate, there is a hole area ratio which gives a minimum value of the nondimensional frequency parameter for each mode. The hole area ratio increases as the order number of the mode increases. 2) The nondimensinal mass-increment parameter decreases as the aspect ration or the order number of the mode increases. For each given aspect ratio, the parameter the fundamental mode decreases monotonically as the hole area ratio increase. In cases of the second and higher order modes, however, each mode has a hole area ratio which gives a maximum value of the parameter for each aspect ratio more then 2/3. 3) Comparing elliptic holes with rectangular ones with same hole area ratio, nondimensional frequency parameters are almost same for each given ratio of the shorter axises to the longer one. 4) The influences of difference in boundary condion on nondimensional frequency parameters in water are similar to those in air.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권1호
• /
• pp.45-53
• /
• 2013

In this paper, we analyze the failure mechanism of the washer pump to find what is the failure cause in the road environment. The statistics show the field common failure mode is inner corrosion. The failure mechanism is assumed that the inner part of washer pump is corroded due to inflow of moisture through vent hole. To prevent the failure, we can think a method that is covering the vent hole. In general, the vent hole is designed to play an important role in an automobile parts. So, we need to prove the vent hole is not necessary. The first purpose of this paper is to make sure that the vent hole does not affect the durability of washer pump using the analysis of operating condition. The second purpose is to compare the durability properties if the vent hole is covered.

• 한국유체기계학회 논문집
• /
• 제17권3호
• /
• pp.59-64
• /
• 2014

The kidney vortex is the important factor adversely influencing film cooling effectiveness. In general, double jet film-cooling hole is designed to overcome the kidney vortex by generating anti-kidney vortices. In this study, the film cooling characteristics and the effectiveness of the double jet film cooling hole were numerically investigated with various area ratios of the first($A_1$) and second($A_2$) cooling hole($A_1/A_2$=0.8, 1.0, 1.25) and lateral ejection angle(${\alpha}$ = $30^{\circ}$, $45^{\circ}$, $60^{\circ}$) as the design parameters. The effects of lateral distance between the first and second row holes are investigated. Numerical study was performed by using ANSYS CFX with the shear stress transport(SST) turbulence model. The film cooling effectiveness and temperature distribution were graphically depicted with various flow and geometrical conditions.