• Journal of the Korean Society of Radiology
• /
• v.11 no.2
• /
• pp.139-144
• /
• 2017

Percutaneous vertebroplasty (PVP) is increasingly used to treat osteoporotic vertebral fractures, myeloma and osteolytic vertebral metastases. The purpose of this study was to measure the absorbed radiation exposure dose and time during PVP and to assess the possibility of deterministic radiation effects to the operator and patient. The radiation dose and time measure by three pain physicians performed consecutive procedures using the twenty case PVP. Patient's dosimeter placed at the anteroposterior(AP) side was treatment of the vertebra body located in the upper level 2-3 and lateral(LAT) side was flank proximal to C-arm tube of back. Operator's dosimeter placed at the apron outside of upper sternum (thyroid), left chest, lower extremity and apron inside of left chest. Results: Radiation exposure times were $3.6{\pm}0.71min$. Measurements on the Patient radiation dose were AP $121.4{\pm}48.1{\mu}Sv$, LAT side $614.7{\pm}177.1{\mu}Sv$. Operator radiation dose were outside of the lead apron upper sternum $33.7{\pm}7.3{\mu}Sv$, outside of the lead apron chest $49.2{\pm}15.0{\mu}Sv$, outside of the lead apron lower extremity $12.8{\pm}3.8{\mu}Sv$ and inside of the lead apron chest $4.2{\pm}1.4{\mu}Sv$. To escape from the danger of radiation first long distance from the c-arm tube second exposure time reduced second lead apron used fluoroscopy during PVP is more safety patient and operation from the radiation exposure.

• KDI Journal of Economic Policy
• /
• v.32 no.4
• /
• pp.153-195
• /
• 2010

The recent global financial crisis has been the outcome of, among other things, the mismatch between institutions and the reality of the market in the current global financial system. The International financial institutions (IFIs) that were designed more than 60 years ago can no longer effectively meet the challenges posed by the current global economy. While the global financial market has become integrated like a single market, there is no international lender of last resort or global regulatory body. There also has been a rapid shift in the weight of economic power. The share of the Group of 7 (G7) countries in global gross domestic product (GDP) fell and the share of emerging market economies increased rapidly. Therefore, the tasks facing us today are: (i) to reform the IFIs -mandate, resources, management, and governance structure; (ii) to reform the system such as the international monetary system (IMS), and regulatory framework of the global financial system; and (iii) to reform global economic governance. The main focus of this paper will be the IMS reform and the role of the Group of Twenty (G20) summit meetings. The current IMS problems can be summarized as follows. First, the demand for foreign reserve accumulation has been increasing despite the movement from fixed exchange rate regimes to floating rate regimes some 40 years ago. Second, this increasing demand for foreign reserves has been concentrated in US dollar assets, especially public securities. Third, as the IMS relies too heavily on the supply of currency issued by a center country (the US), it gives an exorbitant privilege to this country, which can issue Treasury bills at the lowest possible interest rate in the international capital market. Fourth, as a related problem, the global financial system depends too heavily on the center country's ability to maintain the stability of the value of its currency and strength of its own financial system. Fifth, international capital flows have been distorted in the current IMS, from EMEs and developing countries where the productivity of capital investment is higher, to advanced economies, especially the US, where the return to capital investment is lower. Given these problems, there have been various proposals to reform the current IMS. They can be grouped into two: demand-side and supply-side reform. The key in the former is how to reduce the widespread strong demand for foreign reserve holdings among EMEs. There have been several proposals to reduce the self-insurance motivation. They include third-party insurance and the expansion of the opportunity to borrow from a global and regional reserve pool, or access to global lender of last resort (or something similar). However, the first option would be too costly. That leads us to the second option - building a stronger globalfinancial safety net. Discussions on supply-side reform of the IMS focus on how to diversify the supply of international reserve currency. The proposals include moving to a multiple currency system; increased allocation and wider use of special drawing rights (SDR); and creating a new global reserve currency. A key question is whether diversification should be encouraged among suitable existing currencies, or if it should be sought more with global reserve assets, acting as a complement or even substitute to existing ones. Each proposal has its pros and cons; they also face trade-offs between desirability and political feasibility. The transition would require close collaboration among the major players. This should include efforts at the least to strengthen policy coordination and collaboration among the major economies, and to reform the IMF to make it a more effective institution for bilateral and multilateral surveillance and as an international lender of last resort. The success on both fronts depends heavily on global economic governance reform and the role of the G20. The challenge is how to make the G20 effective. Without institutional innovations within the G20, there is a high risk that its summits will follow the path of previous summit meetings, such as G7/G8.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.375-390
• /
• 2009

Statement of problem: Implant supported overdenture is accepted widely as a way to restore edentulous ridge providing better retention and support of dentures. Various types of attachment for overdenture have been developed. Purpose: The purpose of this study was to investigate the influence of attachment type in implant overdentures on the biomechanical stress distribution in the surrounding bone, prosthesis and interface between implant and bone. Material and methods: Finite element analysis method was used. Average CT image of mandibular body(Digital $Korea^{(R)}$, KISTI, Korea) was used to produce a mandibular model. Overdentures were placed instead of mandibular teeth and 2mm of mucosa was inserted between the overdenture and mandible. Two implants($USII^{(R)}$, Osstem, Korea) were placed at both cuspid area and 4 types of overdenture were fabricated ; ball and socket, Locator, magnet and bar type. Load was applied on the from second premolar to second molar tooth area. 6 times of finite element analyses were performed according to the direction of the force $90^{\circ}$, $45^{\circ}$, $0^{\circ}$ and unilateral or bilateral force applied. The stress at interface between implants and bone, and prosthesis and the bone around implants ware compared using von Mises stress. The results were explained with color coded graphs based on the equivalent stress to distinguish the force distribution pattern and the site of maximum stress concentration. Results: Unilateral loading showed that connection area between implant fixture and bar generated maximum stress in bar type overdentures. Bar type produced 100 Mpa which means the most among 4 types of attachments. Bilateral loading, however, showed that bar type was more stable than other implants(magnet, ball and socket). 26 Mpa of bar type was about a half of other types on overdenture under $90^{\circ}$ bilateral loading. Conclusions: In any directions of stress, bar type was proved to be the most vulnerable type in both implants and overdentures. Interface stress did not show any significant difference in stress distribution pattern.

• The Journal of Korean Academy of Sensory Integration
• /
• v.13 no.2
• /
• pp.63-73
• /
• 2015

Objective : To report the effects of a specific intervention, the Interactive Metronome$^{(R)}$ (IM), on timing, attention and motor function of a children with ADHD. Methods : The study is case reports about two boys with ADHD. One boy who is born 2008 is attending general elementary school as a first year student (case 1), and another boy who is born 2001 is attending general elementary school as a second year student (case 2). For each case subject, IM training was provided during 3 weeks, from January 2015 to Febrary 2015. Evaluations were performed pre- and post-intervention in order to exam timing, attention and motor skills. The measurements uses in this study are Long Form Assessment (LFA) for the timing, RehaCom screening module for the attention, and Bruininks-Oseretsky Test of Morot Proficiency, second version (BOT-2) for the motor function. Results : The timing function was improved in both cases since both showed reduced response time for all motor tasks of LFA. In terms of attention, case 1 showed improvement of visual attention division, neglect and response Inhibition, and case 2 showed improvement of sustained attention. Lastly, in the BOT-2, case 1 showed improved the percentile rank of short (from 42%ile to 96%ile), and case 2 also showed similar improvement (from 21%ile to 66%ile). Conclusion : This study provides positive evidence that the Interactive Metronome$^{(R)}$ training has positive power to facilitate several body functions such as timing, attention and motor control of children with ADHD, through two case studies.

• Journal of Distribution Science
• /
• v.9 no.1
• /
• pp.5-15
• /
• 2011

Research regarding corporate associations in marketing has generally been approached using the association theory. However, limited research investigates the effect of corporate associations on consumer loyalty to individual brands by examining the role of self connectedness with a corporate image. The activation of behavior-related constructs can influence individuals' behaviors without their intention or conscious awareness. A recently developed body of research suggests that self connection can play an important role in affecting subsequent behaviors. Although these effects have received considerable attention, the set of mechanisms involved in self connectedness and loyalty to individual brands is not clear. An active self account in which associative constructs can affect behavior by temporarily altering the active self-concept may lead to behavior or evaluation. If the exposure to a corporate brand can induce consumers' cognitive associations and goal-primed effects through the role of active self accounting, the connectedness between the consumer's self and the corporate brand could be developed and this connectedness could be explained by associative and connection models and the goal priming theory. Therefore, this study investigates the influence of corporate associations on loyalty to individual brands through connections between the corporate and the consumer's self. There are three main purposes of the research. First, theories regarding corporate associations will be explored. Second, theories of self-concept will be investigated and self connectedness with corporate brands will be explored. Third, the effects of the connectedness between the self and the corporation on corporate identification and loyalty to individual brands will be investigated. For the purposes of this research, the types of corporate associations are classified into corporate ability (CA) associations and corporate social responsibility (CSR) associations. Furthermore, the connectedness between the consumer's self and the corporate image are divided into two concepts: the connectedness between the individual self-concept and the corporate identity and the connectedness between social self-concept and the corporate identity. This study suggests the hypotheses that the types of consumer self connections with the corporate image could vary according to the types of corporate associations created and further that the connectedness between the corporate association and the consumer's self-concept have positive effects on loyalty to corporate individual brands. The results of testing these hypotheses are as follows. First, corporate ability associations enhance the connectedness between the consumer's individual self and corporate brands. That is, corporate ability associations influence individual connectedness between the corporate and individual self-concept positively from the viewpoint of the consumer's personal ability and branding success. In addition, corporate social responsibility associations have a positive effect on social connectedness between the corporation and the consumer's social self-concept. Second, the connectedness between the corporate brand and the consumer's self-concept affects identification with the corporation. The consumer's personal self and social self connectedness induces corporate identification. Third, individual self connectedness has a positive effect on loyalty to corporate individual brands, while social self connectedness does not. This also means that individual self connectedness with the corporate image or brand plays a more important role in forming individual brand loyalty than social self connectedness with the corporate does. In addition, social connectedness cannot influence individual brand loyalty until it passes through identification with the corporate. Fourth, consumers who experience identification with a corporate identity also show positive responses to corporate individual brands. That is, consumers also develop loyalties toward individual brands through the corporate identification because self-pursued goals that are induced by corporate associations can be achieved by consuming the individual brands that are sold by the corporate that the consumers identify with.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.703-710
• /
• 2005

Data from Hanwoo steers and bull calves were analyzed to see the phenotypic and genetic relationships between carcass traits from four different covariance models. Four models fit test station and test period as fixed effect of contemporary group and sire as random effect assuming paternal half-sib relationships among animals. Each model fits one of linear covariate (s) of different slaughter end points-age at slaughter in the first order, age at slaughter in the first and second order, slaughter weight or back fat thickness at 12-13th rib of cold carcass. Age at slaughter in its second order was not significant. Age at slaughter accounted for signifi- cant amount of genetic variances and covariances of carcass traits. Heritability estimates of back fat thickness, rib eye area, carcass weight, marbling score and dressing percentage were 0.34, 0.22, 0.24, 0.42 and 0.18, respectively at constant age basis. The genetic correlation between carcass weight and the other variables were all positive and low to high in magnitude. Genetic correlations between back fat thickness and rib eye area and between marbling score and dressing percentage were low but negative. Variance and covariance structure between these traits were shifted to a great extent when these variables were regressed on slaughter weight or on back fat thickness. These two covariates counteracted to each other but they adjusted each carcass variable or their interrelationship according to differential growth of body components, bone, muscle and fat. Slaughter weight tended to decrease genetic variances and covariances of carcass weight and between component traits and back fat thickness tended to increase those of rib eye area and between rib eye area and carcass weight.

• Radiation Oncology Journal
• /
• v.22 no.2
• /
• pp.98-105
• /
• 2004

Purpose : To evaluate whether positron omission tomography (PET) with 2-[F-18]fluoro-2-deoxy-D-giucose(FDG) can be used to predict of early response to definitive aim radlotherapy (RT) in squamous cell carcinoma of the head and neck using response rate and locoreglonal control as study endpoints. Materials and Methods : Twenty-two patients with head and neck cancer underwent a FDG-PET study before RT, after a flrst dose of 45 Gy, and after a second dose on more 4han 70 Gy. Standard uptake value (SUV) was calculated for primary tumor (n=22) and neck lymph node (n:10). Attenuation corrected PET scans acquired 60 min after tracer injection were used for evaluation of FDG uptake In tumors. A quantitative FDG uptake index was expressed as Suvlean (corrected for iean body mass). The follow-up time was at least 5 months (range S-1 S months). Results : A total of 22 primary tumors and 10 metastatic lymph nodes were analyzed In FDG-PET. In the first PET study the mean SUVlean the primary tumors and nodes were 5.4 (SD, 2.5) and 4.6 (SD, 2.3), respectively. In the second PET, study peformed after 46 Gy RT the mean SUV in primary tumor and node decreased to 2.9 (SD, 1.9, p<0.001) and 1.7 (SD, 1.3) respectively. in the third PET study peformed at the full dose (more than 70 Gy), RT the mean SUV In the primary tumors and nodes decreased to 2.3 (SD, 1.5, p<0.001) and 1.5 (SD, 1 .1) respectively. Conclusions: FDG uptake In tumors showed a significant decrease after the 45 Gy and more than 70 Gy of RT for squamous cell carcinoma of the head and neck. Reduction of metabolic activity after 46 Gy of radiotherapy Is closely correlated with radiation response.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.720-728
• /
• 2001

Cercaria yamagutii Ito, 1957 (C. yamagutii) was found in Lunatia fortuni (L. fortuni) and Neverita didyma (N. didyma) collected from the tideland of Sim-po located at the estuary of the Mankyong River, Chonbuk. It was finally confirmed that the parasite is Acanthoparyphium tyosenense Yamaguti, 1939 (A. tyosenense) and its life history was clarified in this study. Mactra veneriformis (M. veneriformis) was artificially infected with C. yamagutii isolated from L. fortuni and N. didyma. It began to intrude into M. veneriformis through the inhalent canal. Five hours after infection, the tails of the cercaria began to be separated from the main body and the cercaria started to form cysts. Mature cysts were formed 340 hours (14 days) after infection. The cysts were $300\sim360{\mu}m$ in diameter and the encysted metacercarias were $790\sim800\times300\sim310{\mu}m$ in size. The metacercarias were administered orally to Larus crassiostris (L. crassiostris), and adult worms of $84.5\sim112.5\times55\sim65{\mu}m$ were found full of eggs with $2.20\~3.70$ mm long and $0.40\~0.59$ mm wide after 10 days. In a field study, it was observed that the infection rate of A. tyosenense is $99.5\%$ in M. venerifomis, $76.3\%$ Solen strictus (S. strictus), and $37\%$ Ruditapes philippinarum (R. philippinarum), No difference was found among different host sizes, It was concluded that the first intermediate hosts of A. tyosenense Yamaguti were L. fortuni, N. didyma, Tympanotonus microptera, Cerithidea (Cerithidea) largillierti, Cerithidea (Cerideopsilloa) cingulata, the second intermediate hosts M. venerifomis, S. strictus and R. philippinamn, and the final hosts L. crassiostris and Melanitta fusca stejnegeri.

• Journal of Intelligence and Information Systems
• /
• v.16 no.3
• /
• pp.181-199
• /
• 2010

As rapid progress of population aging and strong interest in health, the demand for new healthcare service is increasing. Until now healthcare service has provided post treatment by face-to-face manner. But according to related researches, proactive treatment is resulted to be more effective for preventing diseases. Particularly, the existing healthcare services have limitations in preventing and managing metabolic syndrome such a lifestyle disease, because the cause of metabolic syndrome is related to life habit. As the advent of ubiquitous technology, patients with the metabolic syndrome can improve life habit such as poor eating habits and physical inactivity without the constraints of time and space through u-healthcare service. Therefore, lots of researches for u-healthcare service focus on providing the personalized healthcare service for preventing and managing metabolic syndrome. For example, Kim et al.(2010) have proposed a healthcare model for providing the customized calories and rates of nutrition factors by analyzing the user's preference in foods. Lee et al.(2010) have suggested the customized diet recommendation service considering the basic information, vital signs, family history of diseases and food preferences to prevent and manage coronary heart disease. And, Kim and Han(2004) have demonstrated that the web-based nutrition counseling has effects on food intake and lipids of patients with hyperlipidemia. However, the existing researches for u-healthcare service focus on providing the predefined one-way u-healthcare service. Thus, users have a tendency to easily lose interest in improving life habit. To solve such a problem of u-healthcare service, this research suggests a u-healthcare recommender system which is based on collaborative filtering principle and social network. This research follows the principle of collaborative filtering, but preserves local networks (consisting of small group of similar neighbors) for target users to recommend context aware healthcare services. Our research is consisted of the following five steps. In the first step, user profile is created using the usage history data for improvement in life habit. And then, a set of users known as neighbors is formed by the degree of similarity between the users, which is calculated by Pearson correlation coefficient. In the second step, the target user obtains service information from his/her neighbors. In the third step, recommendation list of top-N service is generated for the target user. Making the list, we use the multi-filtering based on user's psychological context information and body mass index (BMI) information for the detailed recommendation. In the fourth step, the personal information, which is the history of the usage service, is updated when the target user uses the recommended service. In the final step, a social network is reformed to continually provide qualified recommendation. For example, the neighbors may be excluded from the social network if the target user doesn't like the recommendation list received from them. That is, this step updates each user's neighbors locally, so maintains the updated local neighbors always to give context aware recommendation in real time. The characteristics of our research as follows. First, we develop the u-healthcare recommender system for improving life habit such as poor eating habits and physical inactivity. Second, the proposed recommender system uses autonomous collaboration, which enables users to prevent dropping and not to lose user's interest in improving life habit. Third, the reformation of the social network is automated to maintain the quality of recommendation. Finally, this research has implemented a mobile prototype system using JAVA and Microsoft Access2007 to recommend the prescribed foods and exercises for chronic disease prevention, which are provided by A university medical center. This research intends to prevent diseases such as chronic illnesses and to improve user's lifestyle through providing context aware and personalized food and exercise services with the help of similar users'experience and knowledge. We expect that the user of this system can improve their life habit with the help of handheld mobile smart phone, because it uses autonomous collaboration to arouse interest in healthcare.