• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.285-285
• /
• 2020

본 연구에서는 국내 시설농업단지의 수리지질 특성을 고려한 개념 모델을 설정하여 수리전도도와 이격거리(주입정과 양수정 사이의 거리)에 대한 민감도 분석을 수행하였다. 개념 모델에는 자연적 특성(지형과 지질, 강수량, 수리전도도 등)과 인공적 특성(주입정과 양수정의 이격거리, 주입량과 양수량 등)이 입력되었으며, 민감도 분석은 수리전도도(10^-1 cm/sec, 10^-2 cm/sec, 10^-3 cm/sec, 10^-4 cm/sec)와 이격거리(10 m, 50 m, 100 m)를 조합한 12개의 시나리오로 수행하였다. 양수정의 하류부에 설정된 관측정의 지하수위 강하량은 수리전도도가 감소하고 이격거리가 멀어질수록 증가하였다. 동일한 이격거리에서 수리전도도에 의한 지하수위 강하량의 회귀분석을 통해 인공함양 대수층의 지하수위 변동은 수리전도도에 의해 지배적인 영향을 받음을 알 수 있었다. 인공함양 대수층의 수리전도도가 10^-2 cm/sec 이상인 조건에서는 주입정과 양수정의 이격거리에 따른 지하수위의 영향반경은 20 m 이내이었지만, 수리전도도가 10^-3 cm/sec 이하인 조건에서는 이격거리가 멀어질수록 지하수위의 영향반경이 급격하게 증가함을 확인하였다.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.190-196
• /
• 1998

A new sampling and size exclusion chromatography (SEC) method for the analysis of underivatized cellulose are established. In this method, cellulose materials are first dissolved in N-methylmorpholine N-oxide (NMMO) and diluted by adding dimethyl sulfoxide (DMSO) to make the sample solutions of about 0.1% in 50/50 NMMO/DMSO (w/w). Sample solutions are analyzed using a glucose-treated divinylbenzene (DVB) SEC column and DMSO containing 0.05M LiBr and 2.5 blank as the eluant. The flow rate was constant at 1 mL/min and the whole SEC system including the column was heated at $80^{\circ}C$ to reduce the viscosity of DMSO. Addition of 0.05 M LiBr eliminated SEC baseline drifting, and addition of 2.5 blank seems to reduce the interaction between the sample and the column packing. SEC molecular weights were determined using a calibration curve constructed from a series of narrow pullulan standards, and they were used to measure the degree of degradation during two different pulp-to-sponge processings.

• Journal of Astronomy and Space Sciences
• /
• v.2 no.1
• /
• pp.7-18
• /
• 1985

We have constructed models of steady accretion disk with accretion rate M=$10^{16}g/sec$ or $10^{18}g/sec$. The mass of the radius of white dwarf were taken as $1M_\odot$ and $10^9cm$, respectively. The possible application of the results to Z Cha and Z Cam are discussed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.83-90
• /
• 2017

To understand the spatial-temporal distribution of seawater in Korea's South Sea, seawater movement and the distribution of water temperature has been analyzed using a hydrodynamic model (the Princeton Ocean Model). The directions of tidal currents were generally westward during flood tides and eastward during ebb tides. Northeastward Tsushima Warm Currents in the open sea, which is deeper than 50m were stronger than in coastal areas. Analysis of data from the hydrodynamic model showed that the water temperature in the semi-closed bay was relatively higher ($26{\sim}28^{\circ}C$) than in the open sea ($18{\sim}22^{\circ}C$). The exchange volume of semi-closed seawater was $10,331m^3/sec$ in Gwangyang Bay, $16,935m^3/sec$ in Yeosu-Gamag Bay and $13,454m^3/sec$ in Geoje-Hansan Bay. Therefore, it was shown that the lower seawater exchange volume is, the higher seawater temperature will be.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.15-26
• /
• 1999

The marine structures with sea water cooling system always expose to the oceanic atmosphere. Therefore, the protection of the equipments is very important. To investigate the effectiveness of advanced composite materials for the application in offshore environments, the tensile test, hardness test, undercutting property test, permeance test and the friction and wear test were carried out by using various applicable coating materials. The main results obtained can be summarized as follows; 1. The micro-hardness of the Archcoat 502B showed the highest value. 2. The coefficient of friction of the Rigspray coating at the speed of 2.21m/sec showed the lowest value, and that of the Archcoat 502B coating at 1.08m/sec and 0.18m/sec indicated the lowest values. 3. The wear mass at the speed of 0.18m/sec and 1.08m/sec in dry condition showed the smallest values. 4. The Archcoat 502B coating is fitted to the dynamic instruments in the range of low speed and middle speed. Rigspray coating is fitted to the dynamic instruments in the range of high speed. 5. The wear mass of five kinds of coating materials at the range of low speed was very small, and those of the Archcoat S02B, Archcoat 402B and Rigspray coating at high speed range were quitely smaller than those of the Modified Epoxy and Tar Epoxy.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.206-209
• /
• 1989

It has been that, above $600^{\circ}C$, a cover crystal is essential for protecting InP substrate from severe gas etching during soaking procedure and shown that the melt back rate of substrate crystal in In solvent is about 0.90${\mu}{\textrm}{m}$/sec at 635$^{\circ}C$, 0.57${\mu}{\textrm}{m}$/sec at 615$^{\circ}C$ and 0.37${\mu}{\textrm}{m}$/sec at 595$^{\circ}C$.

• Journal of Periodontal and Implant Science
• /
• v.27 no.2
• /
• pp.411-424
• /
• 1997

The purpose of this study was to evaluate in vitro the effects during subgingival calculus removal using Nd:YAG laser. The study group was consisted of 30 teeth with advanced periodontal disease extracted before the start of periodontal therapy. The specimens were divided into 8 different groups : 1) untreated control 2) scaling and root planing only 3) laser treated using 150mJ/pulse, 1sec, 5sec, contact mode 4) laser treated using 200mJ/pulse, 5sec, contact mode 5) laser treated using 150mJ/pulse, 1sec, non-contact mode 6) laser treated using 200mJ/pulse, 5sec, non-contact mode 7) laser treated using l5OmJ/pulse, 1sec, contact mode with water irrigation 8) laser treated using 200mJ/pulse, 5sec, contact mode with water irrigation. All specimens were prepared for evaluation by scanning electron microscopy(SEM). Specimens from Group 2 exhibited a smear layer of scale like texture with parallel instrument tracks resulting from curet use. Specimens treated by contact mode, Group 3 and 4 featured surface changes not observed· in controls such as charring, randomly distributed pitting and crater formation, and melting down of the tooth material and calculus. Specimens treated by noncontact mode, Group 5 and 6 featured similar surface changes observed in contact mode. However, the differences between contact and non-contact groups not significant. Specimens treated by contact mode with water irrigation, Group 7 and 8 featured slight surface change compared to other groups. The results suggested that Nd: YAG laser did not completely remove the subgingival calculus but was possible the application as adjunctive method.

• Journal of Adhesion and Interface
• /
• v.15 no.4
• /
• pp.169-173
• /
• 2014

The effect of filler sizes on the thermal diffusivity of Nylon 66/SiC composites was investigated. By loading 60 vol% of SiC fillers on Nylon 66, the thermal diffusivity of the composites increased more than 10 times than that of unfilled Nylon 66 and the thermal diffusivity of composites with filler sizes of $24{\mu}m$ and $76{\mu}m$ increased to $2.2{\times}10^{-2}cm^2/sec$ and $1.75{\times}10^{-2}cm^2/sec$, respectively. It is speculated that the smaller filler size ($24{\mu}m$) of SiC is more favorable for the formation of thermal conductive path that the larger size ($76{\mu}m$) of filler composites. The thermal diffusivity of Nylon 46/SiC 400 (60 vol%) composites was $1.61{\times}10^{-2}cm^2/sec$ that was lower than that of Nylon 66/SiC (60 vol%) composites.

• Journal of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.193-197
• /
• 1976

The ultrasonic absorption has been measured in aqueous solution of dodecyl pyridinium chloride (DPC) at $20^{\circ}C$ over the frequency range of 0.1${\sim}$90 Mc.The excess absorption was observed only in solutions in which the concentration was higher than the critical micellar concentration(cmc). The mechanism for this feature was attributed to the reaction $M_2\;{\rightleftharpoons}\;M_1\;＋\;1.2Cl^-$ Where $M_2$ and $M_1$ and M1 are two types of micelle. The rate constants of the forward and the reverse reactions were $6.6{\times}10^5 sec^{-1}\;and\;2.7{\times}10^11sec^{-1}mol^{-1.2}$respectively. Some kinetic charateristics including the free energy, enthalpy and entropy were calculated.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.267-270
• /
• 2002

금정터널 굴착 공사의 실시 설계를 위하여 굴착시 발생하게될 터널내로의 지하수 유출과 관련된 수리지질학적 특성을 연구하였다. 단열들에 대한 정보를 얻기 위하여 지표지질조사 및 지질구조조사를 실시하였다. 연구지역의 투수성을 파악하기 위하여 토양의 물리적, 공학적 특성을 규명하였고, 또한 정압주입시험을 실시하였다. 선구조선의 우세방향은 북북동-남남서 방향으로 동래단층 및 동래단층과 관련된 단층군들이 포함된다. 토양시료의 시험결과, 산정된 수리전도도는 2.l9E-05 m/sec ~ 2.11E-04 m/sec 로서 투수성이 빠름 ~ 매우 빠른 범위 값을 갖는 것으로 나타났다. 주입시험에 의해 산정된 수리전도도는 2.28E-10 m/sec ~ 1.49E-06 m/sec 로서 최대값과 최소값은 4 차수(four order)의 차이를 보였다.