• Resources Recycling
• /
• v.5 no.4
• /
• pp.25-31
• /
• 1996

The wastes ot l~mestone mines have been cause the extrar.ngance of the valuablz m e r a l s and destruction of the environment. Therefore, \\-c tied ta separation of calcite illid clay from the limestone mine wastes by rotntmg screen type separator made by ourselves in order to recyding such us a raw matcriala for cement maimfacture. CaO amtents in the separated coarse products increased from 37.36 wt% to 42+2 wt% at the condition ihat water content in wastes was lzss than 6wt%, the passing time of specimen in &amber was 15 semnds and the rotation speed was 6OLl qm. A process in order lo separate wastes effectively to having wide range aI part~dcs ize was cstablishcd and CaO contents of coarsc products through this process increased to 46.85 wt%. Tbis rcsult is insuEiicient to directly rcusing as a raw malerials for cement. However, it is supposed that coarse products would be able to be reuscd as a raw materials uf cement, if only it rs sclected dolomite in wastes, and really it may be possible in fields Othenvise, undcrsize products(less than 20 mm) would be able to recycling as a raw of cement bccause chcmicrl campasitions of thosc is kept almost constant v&cs on the overall process.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.11 no.2
• /
• pp.13-18
• /
• 2005

The ulnar nerve extends down the arm, across the elbow, and into the hand. It provides sensation to the little and ring fingers and activates many of the small muscles in the hand. The determination of peripheral nerve conduction velocity is an important part of ulnar nerve evaluation. The electrodiagnostic value as neurophysiologic investigative procedure has been known for many years but normal value of digital nerve was not reported in Korea. The purpose of this investigation was to measure the digital nerve conduction velocity of ulnar nerve for obtain clinically useful reference value and compare difference in each fingers and then compare with the other countries. 71 normal Korean volunteers (age, 19-65 years; 142 hands) examined who has no history of peripheral neuropathy, diabetic mellitus, chronic renal failure, endocrine disorders, anti-cancer medicine, anti-tubercle medicine, alcoholism, trauma, radiculopathy. Nicolet Viking II (EMG machine) was use for detected conduction velocity and amplitude of digital nerves in ulnar nerve. Data analysis was performed using SPSS. Descriptive analysis was used for obtain mean and standard deviation and independent t-test was used to compare with ring and little finger. Conduction velocity of the right ring finger was 57.44m/sec and little finger was 55.32msec. The left ring finger was 55.55msec and little finger was 54.11msec. Amplitude of the right ring finger was $30.28{\mu}V$ and little finger was $48.36{\mu}V$. The left ring finger was $30.67{\mu}V$ and little finger was $52.76{\mu}V$. There were significantly difference between ring and little in amplitude (p<.05) but there were no statistically difference between conduction velocity of ring and little finger (p>.05). The amplitude of little finger are greater than ring finger. The present results revealed that electodiagnosis can easily perform in little finger for digital nerve of ulnar nerve study.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.2
• /
• pp.53-60
• /
• 2011

When designing building structures, dynamic serviceability is one of the most important items. Much research is being carried out on machine vibrations that affect inside residents and expensive equipment in the building structure. The vibration effect generally depends on the mass ratio, and an adequate mass ratio is determined by comparison with the serviceability limit according to the criteria. This study investigates the evaluation of vibration serviceability by using ISO 2631 to confirm the propriety of adequate mass ratios and it is verified that the application of a complicated FE model to model the real large shaking table facility with the mathematical model simulated as a SDOF system. The weighted RMS value is then compared with the comfort limit given by ISO 2631. As a result, the analysis of the numerical model is consistent with analysis of the FE model. Moreover, it is found that the adequate mass ratio of the concrete foundation and shake table, considering the self-weight of the real facility, should be less than 0.013. It is also confirm that the sample facility is satisfies the requirement of an adequate mass ratio.

• Journal of Life Science
• /
• v.21 no.9
• /
• pp.1336-1345
• /
• 2011

The purpose of this study was to analyze and compare the effects of exercise science of shoes for Aged' health promotion. Kinematic and kinetic data were collected using cinematography and the Zebris system (Zebris Emed Sensor Platform, GR-DVL9800) to analyze pressure of foot and ground reaction force. Subjects recruited were 20 healthy elderly men. They walked at 1.36m/sec velocity wearing type A (domestic), type B (foreign) and walking shoes (A company). One-way ANOVA was used to analyze statistics. The results were as following: no significant differences were observed in gait variables among the three groups (p<0.05). There was a significant difference in max pronation angle of heels examined among the three groups (p<0.05). There were no significant differences in kinetic variables (ground reaction force and max pressure) among the three groups (p<0.05). A physiology study was performed to analyze the effects of walking with shoes with silver added to them on percent body fat, resting metabolic rate and energy expenditure. Sixty adults males were recruited from the public health center. They were divided into four groups. C: control group (n=20), EY: elderly Y group (n=20), and EO: elderly O group (n=20). The results of this study were as follows: percent body fat was decreased following each exercise period, however, not all the groups showed a significant difference. The change of resting metabolic rate was significantly increased in HI (high intensity) and LI (low intensity) periods in the C and EY groups. However, there was no significant difference in the EO group. The mean energy expenditure during and after exercise were significantly lowered in all periods compared to the control group.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.411-416
• /
• 2002

Yogurt base was prepared from whole milk and skim milk added with 0.2∼1.0% (w/v) of Saururus chinensis(Lour.) Bail water extract (SCe) and fermented with lactic acid bacterias (the mixed strain of Streptococcas themophilus and Lactobacillus bulgaricus) at 37$\^{C}$ for 24 hr. Quality characteristics of the yogurt were evaluated in terms of acid production, number of viable cells, viscosity and sensory property during lactic acid fermentation. The composition of organic acids was also measured by HPLC. Addition of SCe stimulated the growth of lactic acid bacteria and remarkably enhanced the acid production. The viscosity and lactic acid content of yogurt were also increased by addition of SCe. The sensory score of yogurt added with 0.4% of SCe was significantly higher than other groups in taste and overall acceptability The storage abilities of yogurts added with SCe were relatively good at 5$\^{C}$ for 15 days.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.508-526
• /
• 1995

This experiment was performed to study mechanisms of desensitization by chemical desensitizing agents in hypersensitive dentin and compare effects of these agents by measuring the activity of intradental nerves and observing their occluding aspects on dentinal tubules with SEM over time after application of chemical desensitizing agents to the exposed dentinal surfaces. Canines of adult cats weighing 2-3 kg were cross-sectioned at 1.5 mm from incisal apex, and the smear layer of the exposed dentinal susface was removed by 32 % $H_3PO_4$ for 15 sec. Chemical desensitizing agents such as 10% $SrCl_2$, 5% $KNO_3$ and 30% $K_2C_2O_4$, were applied to the exposed dentin surfaces for 2 minutes. Intradental nerve activity was measured immediately after application of the agents, at 15 minutes and at 30 minutes by stimulating with 4M NaCl. To compare occluding ability of desensitizing agents on dentinal tubules in vivo and in vitro, the structures of the exposed dentinal surfaces of nonvital and vital teeth were morphologically observed by SEM. The results obtained were as follows : 1. Intradental nerve activity was decreased immediately after the application of 10 % $SrCl_2$, 5% $KNO_3$ and 30% $K_2C_2O_4$. (p<0.01), among which 30% $K_2C_2O_4$. showed the highest desensitizing effect(p<0.01). 2. The immediately decreased intradental nerve activity after application of 10 % $SrCl_2$ and 5% $KNO_3$ was increased over time. 10% $SrCl_2$ and 5% $KNO_3$ showed no desensitizing effect respectively at 30 minutes and at 15 minutes after application. 3. The immediately decreased intradental nerve activity after application of 30 % $K_2C_2O_4$ was persistently continued during the period of observation (p<0.01). 4. Precipitates of $SrCl_2$ and $KNO_3$ were not noted on the exposed dentinal surfaces and within dentinal tubules by SEM examination. On the other hand, 30 % $K_2C_2O_4$ produced precipitates on the exposed dentinal surfaces and openings of dentinal tubules without any formed preciptates within dentinal tubules. 5. Ten percent $SrCl_2$, 5 % $KNO_3$ and 30 % $K_2C_2O_4$ showed no differences in their occluding aspects on dentinal tubules either in vivo or in vitro studies and either immediately following application or at 30 minutes. These results suggest that the desensitizing effect of $SrCl_2$ and $KNO_3$ is resulted from their reducing effect on the intradental nerve activity rather than from their precipitates' occluding the dentinal tubules. However, desensitizing effect of 30 % $K_2C_2O_4$, is probably resulted from its precipitates' occluding the openings of the dentinal tubules as well as from it's reducing effect on the intradental nerve actibity.

• Applied Biological Chemistry
• /
• v.28 no.3
• /
• pp.167-173
• /
• 1985

Hot air drying characteristics of six year old cooked ginseng root at temperature ranges of $55{\sim}75^{\circ}C$ under 1.8m/sec air velocity and shrinkages accompained were investigated. Drying time to reach equilibrium moisture content of the root takes from 20 to 30 hours, depending on the subjected drying temperatures and root sizes. Drying curve shows that it has two or three falling stages and drying constant are continuously changed. Higher drying constant was observed both at early and late stages of drying. Shrinkage ratio of length, diameters, surface area and volume of the root were 13.0, 39.8, 47.7 and 68.5%, respectively, after 40 hours dry at $55^{\circ}C$. The most of shrinkage was observed at early drying stage.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.47-58
• /
• 2011

Halogen free intumescent flame retardants(IFRS), such as the mixture of melamine phosphate(MP) and char forming agents(pentaerythritol(PER), di-pentaerythritol(DiPER), tris(2-hydroxyethyl) isocyanurate(THEIC)), were prepared and characterized. Polypropylene(PP)/$IFR_S$ composites were also prepared in the presence of ethylene diamine phosphate(EDAP) as a synergist and used into flame retardant PP powder coatings. Thermoplastic PP powder coatings at 20 wt% flame retardant loading were manufactured by extruded and then mechanical cryogenic crushed to bring them in fine powder form. These intumescent flame retardant powder coatings($IFRPC_S$) were applied on mild steel surface for the purpose of protection and decorative. It is a process in which a $IFRPC_S$ particles coming in contact with the preheated mild steel surface melt and form a thin coating layer. The obtained MP flame retardant was analyzed by utilizing FTIR, solid-state $^{31}P$ NMR, ICP, EA and PSA. The mechanical properties as tensile strength, melt flow index(MFI) and the thermal property as TGA/DTA and the fire safety characteristics as limiting oxygen index(LOI), UL94 test, SEM were used to investigate the effect of $IFRPC_S$. The experimental results show that the presence of $IFR_S$ considerably enhanced the fire retardant performances as evidenced by the increase of LOI values 17.3 vol% and 32.6 vol% for original PP and $IFRPC_S$-3(PP/MP-DiPER/EDAP), respectively, and a reduction in total flaming combustion time(under 15 sec) in UL94 test of $IFRPC_S$. The prepared $IFRPC_S$-3 have good comprehensive properties with fire retardancy 3.2 mm UL94 V-0 level, LOI value 32.6%, tensile strength $247.3kg/cm^2$, surface roughness Ra $0.78{\mu}m$, showing a better application prospect. Through $IFRPC_S$-2(PP/MP-PER/EDAP) and $IFRPC_S$-3 a better flame retardancy than that of the $IFRPC_S$-1(PP/MP/EDAP) was investigated which was responsible for the formed more dense and compact char layer, improved synergy effect of MP and PER/DiPER.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.1
• /
• pp.19-31
• /
• 2005

A study on the beneficiation of illite occurring in Youngdong province is performed with applying selective grinding and air classification techniques. Quartz and illite are occurred as major components, and sulfide minerals such as pyrite, chalcopyrite are associated as minor components. The result of sieving test shows that contents of Al₂O₃, K₂O and ignition loss are increased, whereas SiO₂ is decreased with particle size decrease. Fe₂O₃ content is almost same in all the particle size range but slightly lower at coarse particles. The yield of fine particles is increased with increasing rotor speed in both grinding stage and air classification stage. When the selective grinding and air classification are carried out at optimal condition, yield of the concentrate is 76.16 wt.%. The chemical compositions of the concentrate are SiO₂70.13%, Al₂O₃ 19.40%, Fe₂O₃ 1.62%, K₂O 5.20%, and ignition loss 2.77%. The beneficiation process developed in the current study is very effective method which purification and particle size control can be achieved simultaneously.