• The Journal of Advanced Prosthodontics
• /
• 제3권4호
• /
• pp.196-203
• /
• 2011

PURPOSE. This study evaluated marginal fit of glass infiltrated alumina cores fabricated using two techniques and their marginal stability after firing cycles of veneering porcelain. MATERIALS AND METHODS. Fifteen standardized all-ceramic crowns were fabricated on a metal die using each technique: slip cast technique of VITA In-Ceram sprint Alumina (Group A as control) and plastic foil matrix technique of Turkom-Cera fused alumina core system (Group B). Copings were compared between groups and within groups at coping stage and after firing each layer of veneering porcelain. A device was used to standardize seating of copings on the metal die and positioning of the specimens under the microscope after each stage of fabrication. The specimens were not cemented and marginal gap was measured using an image analyzing software (Imagepro Express) on the photographs captured under an optical microscope. Two tailed unpaired 't test' was used to compare marginal gaps in two groups and one way ANOVA was used to analyze marginal distortion within each group at 95% confidence interval. RESULTS. The marginal gap was smaller at the coping stage in group B ($60+30{\mu}M$) than group A ($81+21{\mu}M$) with statistical significance. After firing of veneering porcelain the difference was insignificant. At the final stage, both groups exhibited lower mean marginal gaps than at the initial coping stage with the difference of $11.75{\mu}M$ for group A and $11.94{\mu}M$ for group B, but it was statistically insignificant due to high value of standard deviation. CONCLUSION. Within the limitations of this study, it was concluded that both techniques produced copings with comparable and acceptable marginal fit and marginal stability on firing veneering porcelain.

• 가정과삶의질연구
• /
• 제27권5호
• /
• pp.77-90
• /
• 2009

The purpose of this study was to investigate the residents' use and occupancy-behavior in the activity areas of the senior nursing facilities, and to provide basic information to establish the appropriate physical elements for planning the activity areas. For the study, the observations in five facilities were conducted for one day, from 10 a.m. to 4 p.m by four researchers. The results of the study are summarized as follows: First, most of the using behaviors in the activity areas were the doing nothing or sleeping. The meals and program services were provided in only one activity area of the floor and it showed that the unit care system was perfunctorily conducted at those facilities. In the representative activity area, its openness was the main physical element influencing the spatial using frequency, while the accessibility and the openness in the sub-activity area were most important. The seating arrangements having comers were helpful for residents' interactions. Second, while facility programs and meals were provided in the specific activity area, there was no residents' occupancy in other activity areas at the same time. There were interactions including residents' conversations and watching/observations in non-designated activity areas such as the nursing stations and near corridors. But the residents' interactions and self-regulations were blocked by absence of territoriality, monotonous spatial compositions and furniture arrangements, insecurity of residents' privacy, wide or narrow areas, and isolated spatial type. Based on the results at the above, basic guidelines for planning the activity areas of senior nursing facilities can be proposed as follows: First, the isolated type and the sight interception should be avoided in representative activity areas. It should be partitioned with couple of areas through the appropriate furniture arrangements, and be prepared semi-private spaces in non-designated areas such as nursing station for the interactions among the residents and the staff. Second, in activity areas for small group, the isolated type is not also good for the residents' accessibility. The residents' privacy should be confirmed through the various spatial compositions, and enough areas need to be sure for the diverse furniture arrangements.

• 대한전자공학회논문지TC
• /
• 제43권9호
• /
• pp.135-141
• /
• 2006

교통사고를 예방하기 위해서는 시트조정을 통해서 운전자의 시야를 확보하고, 운전자가 뒤에 오는 자동차를 알아 볼 수 있도록 룸미러의 위치를 조정하는 것이 매우 중요하다. 본 논문에서는 이러한 문제점을 해결하기 위해서, 안전하고 편리한 차량을 목표로 운전자가 차량에 앉게 되면, 자동으로 시트를 조정하여 운전자의 시야를 확보 할 수 있도록 한다. 또한 백미러를 자동 조정해서, 운전자가 안전운전에 도움이 될 수 있는 자동차 시트 자동 조정 알고리즘을 개발하였다. 특히, 교통사고 발생해서, 에어백이 작동 할 때에 본 논문에서는,승객의 몸무게에 따라서 충격완화를 위한 시트 자동조정 알고리즘을 기능을 추가하였다. 뿐만 아니라, 본 논문에서는, 교통사고 발생 시 운전자가 위험지역을 통과할 때 위험지역임을 운전자에게 통지하여 안전한 운전이 되도록 하는 알고리즘을 개발하였으며, 유비쿼터스 환경에서 모의실험을 하였다. 모의실험 결과 지능을 이용한 교통사고 분석 방식이기존의 방식보다 25% 이상 교통사고를 줄일 수 있음을 확인하였다

• 대한치과보철학회지
• /
• 제39권4호
• /
• pp.366-375
• /
• 2001

The objective of this study was to investigate the surface contact and screw joint stability between screw and implant interface by use of sealer. The implants evaluated in this study were Steri-Oss futures(Hexlock $3.8D{\times}10mm$: Steri-Oss, Yorba Linda, CA), and Steri-Oss staight abutment. Titanium alloy screws were used to secure abutments to implants. The other titanium alloy screws applicating sealer(Impla-Seal, Implant Support Systems, Inc. Irvine, CA) were used to secure abutments to implants. In one another sample, 6kg of force was applied during simulated intraoral movements after abutment screws were secured to the implants with sealer. All samples were cross sectioned with sandpaper and polished with $0.1{\mu}m\;Al_2O_3$. Then samples were recorded with an scanning electron microscope. The results were as follows : 1. In the case of titanium alloy screw, irregular contacts and relatively large gap were present at thread mating surface. Also abutment screw/implant interface demonstrate incomplete seating and only one surface contact of threads between implant and screw. 2. In the case of titanium alloy screw applecating sealer, sealer was present between implant and screw. Therefore implant and screw had relatively close and tight contact without the presence of large gap. 3. On the other hand, in the case of titanium alloy screw applicating sealer and dynamic loading of suprastructures, sealer was partially present between implant and screw. Conclusively, sealer fills voids, creating a barrier to moisture and bacteria. In addition, loading of suprastructures may change the situation and limit the indications for gap sealing.

• 대한치과보철학회지
• /
• 제56권2호
• /
• pp.120-125
• /
• 2018

기존의 의치 인상채득 방법은 치조제 흡수가 심한 환자에게 사용하기에 한계점이 있으며, 의치상을 과도하게 연장하여 문제를 발생시킬 수 있다. 특히나 가동성조직이 존재하는 경우에는 정확한 인상 채득을 하기가 어렵고, 따라서 총의치의 적절한 안착을 방해할 수 있다. 치조제 흡수가 심한 환자에서 폐구법 인상을 이용하여 총의치를 제작하면 더 나은 안정성과 유지를 얻을 수 있다. 본 증례는 86세의 여자환자로 상악 전치부에 치은열성비대가 존재하며 하악의 심한 치조제 흡수를 보이는 무치악 환자이다. 따라서 Centric tray를 이용하여 잠정적인 교합고경을 결정 후 고딕아치 장치를 부착한 맞춤형 트레이를 제작하였고, 폐구법 인상채득을 시행하여 상하악 총의치를 제작하였으며, 의치의 충분한 안정성과 유지력을 얻어 환자의 만족도를 높였다.

• 대한가정학회지
• /
• 제47권7호
• /
• pp.13-32
• /
• 2009

The purpose of this study was to analyze the state of housing and domestic living conditions of Vietnamese individuals in Vietnam and Korea. Using ethnographic methodologies, It was examined examined 22 Vietnamese households in Korea in relation to their usage of domestic space and also conducted the same investigation on 20 Vietnamese households in Vietnam. The following conclusion were established; 1) The majority of households in both countries preferred that the kitchen was close to the dining room and living room while a kitchen door was not deemed as necessary. 2) In Korea, washing machines are used in the bathroom space, while in Vietnam they are used outside or in a specially designated space. 3) The most uncomfortable aspect of home life in Korea was having the bathroom and toilet in the same space while in Vietnam they are separately spaced. It is recommended that house plans with separate bathroom and toilet area be made available for Vietnamese migrants. 4) Chairs were used in the sleeping area for eating, especially if guests were present, but the floor space was also used for eating. 5) Tile is a typical floor material in Vietnam while vinyl is popular in Korea. However, migrant workers were comfortable with both materials. 6) All 20 households didn't have any heating system in Vietnam but most migrants preferred a modified Ondol in Korea. 7) Most migrants took their shoes off while inside the house in Vietnam and Korea. Furthermore, the majority of households didn’t have any designated shoes space at the entrance to the house in Vietnam and most were satisfied with the same situation in korea. 8) Most households in Vietnam and Korea preferred to decorate their living room with various things or as a place of worship to their ancestors. The direction of house was an important element when deciding to buy or building houses in both countries.

• 대한가정학회지
• /
• 제45권7호
• /
• pp.1-15
• /
• 2007

The purpose of this study is getting information for making a plan of immigrant workers in Korea. As a first step to suggest plans for immigrant workers who have multi-cultural background, this study investigated to the domestic living of Koreans(ChoSun-Tribe) of Gillim province in China. For this, usage of domestic space questionnaire were used. Results of the research were as follows. 1. The most popular LDK type was the one which kitchen was separated from living room and dining room. Most of them thought that kitchen and living room have to be separated. 2. There was no plan for laundry room specially and most houses have a washing machine in the bathroom. Most houses didn't install a bathtub in the bathroom and they didn't think that it was indispensable. 3. It was estimated that they used a living room as a multi-purpose room for the family but used a master bedroom for its own purpose. 4. They used a table and chair for meals normally but they took meals sitting on the floor with a large family or guest. 5.All of them took off the shoes inside of the house for hygienic reason. There was no plan for the space to take on-off shoes in most houses and they just put the mat on the floor for it. 6. Modified Ondol system which use water pipe under the floor was popular in apartment while most detached houses had traditional Ondol system. The satisfaction about Ondol system was very high compared to other ones and also Ondol system was the most desirable one for ChoSun-Tribe.

• 감성과학
• /
• 제13권1호
• /
• pp.269-278
• /
• 2010

최근 가상현실 시뮬레이션 기술은 컴퓨터 테크놀로지의 급속한 발달과 더불어 시각적 표현과 인터랙션의 성능은 정교화 되는 동시에, 고급 장비나 전문 지식에 의존하지 않고도 사실적인 구현이 가능한 단계까지 발전해 왔다. 본 연구는 저가의 비용으로도 가능한 가상현실 시뮬레이션 테크놀로지를 바탕으로, 시각적 현실감이 뛰어난 시뮬레이션으로 서비스 환경을 구현하여 제시함으로써 실제사용자 즉, 엔드유저의 감정적인 반응을 파악하고, 그러한 과정을 기존의 디자인 프로세스에 접목하는 방안을 제안하는데 그 목적이 있다. 본 논문에서는 실제 레스토랑 디자인 프로젝트의 사례를 통해 가상현실 테크놀로지를 사용한 시뮬레이션의 구체적인 개발과정 및 적용과정을 살펴보았다. 이를 통해 사용자 경험에 관한 데이터를 수집하고 분석하는 과정 그리고 시뮬레이션을 통한 결과 적용 시 고려해야 할 사항에 대해서 소개하고 있다. 본 연구는 사용자의 감정적인 반응이 중요시 되어야 하는 디자인 분야에 3차원 가상현실 시뮬레이션이 도입될 경우 유용한 지침을 제공할 수 있으리라 기대한다.

• 대한물리의학회지
• /
• 제8권1호
• /
• pp.99-109
• /
• 2013

PURPOSE: This study was designed to evaluate the current state of training in assistive technology(AT) for pediatric physical therapists(PPTs) and pediatric occupational therapists(POTs), in addition, investigate therapists' preferred training methods and contents. The eventual purpose was to suggest the essential fundamental factors to adapt the assistive technology in clinics. METHODS: The subject of this study were 167 therapists(98 PPTs and 69 POTs) who work at general hospitals, welfare center, facilities for the disabled, and special education school in Seoul and Gyeonggi province. Frequency analysis and Chi-squared test were used. RESULTS: Significant numbers of PPTs(66 therapists, 67.3%) and POTs(50 therapists, 72.5%) answered that they had received training in AT. More than 48% answered no training experience or low adequacy in each classification scheme for questions. The most difficulty in the training was indicated by lack of education opportunity(90 therapists, 53.9%). The most required device training was seating and position device training(43 therapists, 21.9%) for PPTs and orthosis and prosthesis device training(29 therapists, 21.0%) for POTs. In assistive technology service, PPTs needed evaluation to AT device training(69 therapists, 35.2%) and POTs needed evaluation to disabilities for AT training(41 therapists, 29.7%). Both therapists answered that the most effective training is continuous education(52 therapists, 31.1%) and college education(48 therapists, 28.7%). CONCLUSION: Our findings indicate that PPTs and POTs need more opportunities for training in AT. For effective clinical app lication of AT, there should be continuous education such as on-the-job training, mentoring program, technical manual, and college education.

• 한국실내디자인학회논문집
• /
• 제24권2호
• /
• pp.180-188
• /
• 2015

University libraries aim to improve not only educational effects but also the general quality of colleges. A primary way of pursuing this goal is through providing professors and students with sufficient amounts of available references and materials that can be used for academic purposes. However, even though university libraries are intended to be used by college students majoring in different fields, they tend to provide mostly books. This limited offering of resources means that they are not distinguishing themselves from regular libraries. The purpose of this study is to present basic data for the spatial design of a subject specialization room in a college library. Included in the design are recommendations for the type and placement of the furniture in the room. The summary of results for this study and the conclusions are as follows: The layout of data space and reading space in a subject specialization room can be categorized into both document-oriented (document centralized and document categorized) and reading-oriented (reading centralized, all, and group types). The public reading seats and private reading seats in a subject specialization room, according to their ratio, can be divided into private reading, public reading, and distributed reading sections. The ratio of open-spaced tables is higher for groups of four or more people, but users often sit separately from others in order to ensure privacy. Unfortunately, this practice results in seating gaps that do not make efficient use of space. The result is that the public reading seats are less efficient than the private reading seats in terms of space. Therefore, it is necessary to increase the number of cubicles.