• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.33-41
• /
• 2008

Architectural acoustics design of Namsadang exclusive use theaters should be designed to utilize variously to performance space that can fill flavor and taste of Namsadang performance of the Namsadang six yards. Also, analyze special quality that is sound enemy who follow in sound-absorbing materials fare arrangement of innards that is design material of architectural acoustics laying stress on tradition, use purpose and disappointment size that Namsadang exclusive use theaters seeks on the basis of specific space theme that is experience, disappointment form, seat and passageway Wall and ceiling etc. research and sound and meaning of a character wave motion powerful engineering phenomenon and reduction reverberation loss that is happened from indoor manufacturing thing reduction SCALE model of oval structure research and background of AL composition absorbing material of perforate 25% to heighten acoustic absorptivity of practical use internal organs sound absorption material emir quality sound-absorbing materials insert and layer of air most suitable reverberation time of Namsadang exclusive use theaters that 2.2m volume is $42,218\;m^3$ to become 1.2Sec architectural acoustics design do.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1960-1969
• /
• 1999

This paper presents dynamic modeling and controller design of a tracked vehicle installed with the double rod type ERSU(electro-rheological suspension unit). A 16 degree-of-freedom model for the tracked vehicle is established by Lagrangian method followed by the formulation of a new sky-ground hook controller. This controller takes account for both the ride quality and the steering stability. The weighting parameter between the two performance requirements is adopted to adjust required performance characteristics with respect to the operation conditions such as road excitation. The parameter is appropriately determined by employing a fuzzy algorithm associated with the vehicle motion. Computer simulations are undertaken in order to demonstrate the effectiveness of the proposed control system. Acceleration values at the driver's seat are analyzed under bump road profile, while frequency responses of vertical acceleration are investigated under random road excitation.

• 한국소음진동공학회논문집
• /
• 제13권7호
• /
• pp.548-554
• /
• 2003

This study alms to investigate the dynamic properties of express buses in the very low frequencies which cause motion sickness Incidence. Since passengers often use express buses for long distance traveling. it is a critical point whether the ride give rise to motion sickness or not. In the study accelerations at the three Points on the floor of the six test vehicles were measured during the driving at constant speeds. By applying the frequency weighting corves suggested in ISO 26.31-1, the Physical quantity of accelerations were changed into the perceptual amount used to judge quantitatively the incidence of motion sickness. Motion sickness dose values were calculated from the frequency weighted time history of acceleration signals, and compared between the vehicles, driving conditions. and the seat positions in the bus. During the 50 minutes' driving on the public road and high ways. the vomiting incidence ratios were seen to range from 0.4 to 0.8 ％. which is equivalent to 2.4 to 4.8 ％ for 5 hours' driving. Unlike the very smooth road conditions considered in this work, motion sickness dose values encountered in real situations are expected to increase.

• 한국소음진동공학회논문집
• /
• 제20권9호
• /
• pp.797-804
• /
• 2010

In case of the construction equipment using by the military camp, such equipments are different from those equipments using at general construction site, of which muffler(silencer) is attached at the passenger seat side, since such equipments are obsoleted, it is great part that a considerably loud noises are continuously diffusing. When working, such noise can be influenced a lot of effects to those working soldiers nearby the equipment, and though it is really terrible loud noise as much as can arise a civil complaints by neighboring civilians, but because its specialty of the military, it is real state that there are many difficulties in establishing an effective soundproof countermeasure due to study shortage and lack of the relevant material regarding to military construction equipment. Accordingly, this study has ever grasped the characteristics of noise by its each frequencies and by distances about those 9 kinds of construction equipments using chiefly by the military camp. As the result, it was known that the military construction equipment is generating the loud noise which can influence bad effect to the workers, and such high sound pressure level of low frequency band can harm even to far distance.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.30-37
• /
• 2012

Pneumatic Active Engine Mount(PAEM) with open-loop control system has been developed to reduce the transmission of the idle-shake vibration induced by engine effectively and economically. A solenoid valve installed between PAEM and vacuum tank is on-off switched by the Pulse Width Modulate(PWM) control signal to decrease the dynamic stiffness of the engine mount. This paper presents the methodology to identify the optimal values of control parameters of a PAEM, i.e, turn-on timing and duty ratio of PWM signal for 6 different idle driving conditions. A scanning algorithm was first applied to the vehicle test to obtain the approximate optimal control parameters minimizing the vibration at front seat rail and at steering wheel. Then the PAEM system identification was fulfilled to find accurate optimal control parameters by using multi-layer neural networks of Levenberg-Marquardt algorithm with vehicle test data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.234-240
• /
• 2003

This study aims to investigate dynamic properties of express buses in the very low frequencies which affect motion sickness incidence. Since passengers often use express buses for long distance traveling, it is a critical point whether a give rise to motion sickness or not. In the study accelerations at the three points on the floor of the six test vehicles were measured during the driving at constant speeds. By applying frequency weighting curves suggested in ISO 2631-1 and ISO 2631-3, physical amount of accelerations were changed into perceptual amount which determines incidence of motion sickness. Motion sickness dose values were calculated from the frequency weighted time history of accelerations, and compared between the vehicles, driving conditions, and the seat positions in the bus. During the driving on public road and high ways for 50 minutes vomiting incidence ratios ranged 0.4 to 0.8%, which were equivalent to 2.4 to 4.8% for 5 hours' driving. The value of 4.8 % means two among 45 passengers may vomit after the traveling, which is very serious situation. Considering the very smooth driving condition at which the data were collected, motion sickness dose values will increase in real situations

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.369-374
• /
• 2004

This study aims to measure an apparent mass of a seated human body at the sitting posture in a passenger car in the frequency range from 1 to 20 Hz and to investigate the dynamic characteristics. Thirty subjects joined the test where eight levels of acceleration from $0.1m/s^2\;to\;2.0m/s^2$ were used to excite seated human body. Most of apparent mass curves showed two peaks in the frequency range of $4\sim9Hz$, first peak was clearer at the contact point of the seat and the hip, and the second one at the contact point of the backrest and the back. Both peak frequencies were found to move down to lower frequencies with increase of acceleration magnitude. Shapes of apparent mass curves were clearly different from those at erect posture especially in the frequency range around and above the second peak.

• 한국항공우주학회지
• /
• 제48권6호
• /
• pp.443-453
• /
• 2020

대표적인 기동 헬리콥터인 UH-60A의 기체 진동응답을 감소시키고자 능동 진동 제어 시스템(Active Vibration Control System, AVCS)을 이용한 시뮬레이션 연구를 수행하였다. 로터 진동 하중, 기체 구조 동역학 모델링, 진동응답 해석 및 진동 제어 시뮬레이션 연구를 수행하기 위하여 DYMORE II, NDARC, MSC.NASTRAN 및 MATLAB Simulink 등의 다양한 해석, 설계 및 제어 프로그램들을 함께 사용하였다. 5개의 CRFG와 7개의 가속도계로 이루어진 Multi Input Multi Output(MIMO) 모델을 AVCS 시뮬레이션 연구에 이용하였다. 본 시뮬레이션 연구를 통하여 진동이 극심한 158knots의 비행속도에서 UH-60A의 주요 위치(조종석, 로터와 기체의 접합부, 중앙 승객실 및 후방 승객실) 위치에서 AVCS의 사용으로 인하여 4/rev 기체 진동응답이 25.14~96.05%만큼 감소될 수 있었다.

• 감성과학
• /
• 제25권1호
• /
• pp.3-20
• /
• 2022

최근 도심항공모빌리티(UAM) 상용화에 앞서 도심 내 항공 교통수단 관련 산업에 대한 연구개발 중요성이 급격히 증가하고 있다. 도심항공모빌리티(UAM) 환경을 조성하기 위해서 핵심 항공 이동 수단 비행체인 개인용 항공기(PAV) 기체에 관한 연구가 수행되고 있으나, 탑승자 관점의 연구가 상대적으로 부족한 상황이다. 특히 PAV는 탑승자의 새로운 생활공간으로 활용될 것으로 예상되기 때문에 탑승자의 실내행위를 지원하는 실내공간 설계를 위해서는 PAV 기체에서 발생하는 물리적 요소가 인체에 미치는 영향에 관한 연구가 필수적으로 이루어져야 한다. 이에 본 연구의 목적은 PAV의 공중 운항 특성으로 인해 인체에 영향을 주는 제약 요소를 도출하고, 이러한 제약 요소가 실내행위를 수행하는 탑승자 인체에 미치는 영향을 파악하는 것이다. 본 연구 결과, 항공 이동 수단 비행 기체 PAV는 4,000ft 이하에서 운항해야 하는 기준에 따라, 운항고도에 따른 제약 요소는 소음, 진동, 저주파 운동에 의한 멀미로 나타났다. 이러한 제약 요소가 실내행위에 영향을 미친다는 관점에서 PAV에서 행할 수 있는 실내행위를 자율주행 자동차, 비행기, PAV 컨셉 사례를 활용하여 도출하고 인체에 미치는 영향과 수준을 고려하여 실내행위 지원을 위한 제약 요소 권장기준을 설정하였다. 또한 실내행위 지원을 위한 제약 요소의 인체 영향 수준을 감소시키기 위해서는 시트의 형태 및 내장기능(진동 저감 기능, 온도조절, LED조명 등), 개인 좌석별 지향성 스피커를 활용한 외부소음 감소, 소음과 진동 감소를 위한 내장재 등을 실내공간 설계에 반영해야 함을 제시하였다. 본 연구는 PAV 실내행위에 영향을 주는 제약 요소를 도출하였고, 인체에 미치는 영향 수준을 확인하였으며, 추후 PAV 실내 설계 시 기초자료로써 활용할 수 있다는 점에서 의미가 있다.

• 소음진동
• /
• 제10권2호
• /
• pp.240-246
• /
• 2000

One of the widely accepted methods for evaluating the interior sound quality of automobiles is Articulation Index(AI). The AI actually measures the articulation level of the sound in the vehicle cabin as passengers talk to one another. In this study, the effect of two different absorption materials inside the cabin on AI has been investigated by ray-tracing method : one is firewall, the other is celling. It turns out that the back seat location is found to be strongly dependent on the type of absorption materials treated at the celling, since the sound absorbing area is different due to the location and the firewall is situated in the "Reverberation Radius". The proposed methdo could be used to improve the sound quality of automobiles at the design stge.sign stge.