• Journal of the Korean earth science society
• /
• v.21 no.4
• /
• pp.449-468
• /
• 2000

The Ordovician Chongson Limestone deposited in the carbonate ramp to the rimmed shelf shows diverse diagenetic features. The marine diagenetic feature appears as isopachous cements surrounding ooids and peloids. Meteoric diagenetic features are recrystallized finely and coarsely crystalline calcite, evaporite casts filled with calcite, and isopachous sparry calcite surrounding ooid grains. Shallow burial diagenetic features include wispy seam, microstylolite, and dissolution seam whereas deep burial features include stylolite, burial cements. blocky calcite with twin lamellae, and poikilotopic calcite. Dolomites consist of very finely to finely crystalline mosaic dolomite formed as supratidal dolomite, disseminated dolomite of diverse origin, patchy dolomite formed from bioturbated mottles, and saddle dolomite of burial origin. Silicified features include calcite-replacing quartz and fracture-filling megaquartz. Burial cements characterized by poikilotopic texture show ${\delta}^{18}$O value of -10.4 %$_o$ PDB, ${\delta}^{13}$C value of -1.0%$_o$ PDB and 504ppm Sr, 3643ppm Fe, and 152ppm Mn concentrations. Finely and coarsely crystalline limestones show similar ${\delta}^{18}$O and ${\delta}^{13}$C value to those of burial cements; however, they show lower Sr and higher Fe and Mn concentrations than burial cements. This suggests that very finely and coarsely crystalline limestones were recrystallized in freshwater and then they were readjusted geochemically in the burial setting whereas the burial cements were formed in relatively high temperature and low water/rock ratio conditions. Very finely and finely crystalline mosaic dolomites with ${\delta}^{18}$O value of -8.2%$_o$ PDB, ${\delta}^{13}$C value of -1.9 %$_o$ PDB, and 213ppm Sr, 3654ppm Fe, and 114ppm Mn concentrations, respectively are interpreted to have been formed penecontemporaneously in supratidal flat and then recrystallized in the low water/rock ratio burial environment. Geochemical data suggest that the low water/rock ratio burial environment was the dominant diagenetic setting in the Chongson Limestone. The Chongson Limestone has experienced marine and meteoric diagenesis during early diagenesis. With deposition of Haengmae and Hoedongri formations part of the Chongson Limestone was buried beneath these formations and it experienced shallow burial diagenesis. During the Devonian the Chongson Limestone was tectonically deformed and subaerially exposed. During the Carboniferous to the Permian about 3.3km thick Pyongan Supergroup was deposited on the Chongson Limestone and the Chongson Limestone was in deep burial depths and stylolite, burial cements, blocky calcite and saddle dolomite were formed. After this burial event the Chongson Limestone was subaerially exposed during the Mesozoic and Cenozoic by three periods of tectonic disturbance including Songnim, Daebo and Bulguksa disturbance. Since the Bulguksa disturbance during Cretaceous and early Tertiary the Chongson Limestone has been subaerially exposed.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.35-45
• /
• 2013

The concrete-filled tube column has the excellent structural performance. But it is difficult to connect with column and beam because of closed section. It suggests that pipe should be produced by welding two sides together where two shapes are joined after a channel is pre-welded onto the three sides in order to form an internal diaphragm. The upper diaphragm of the connection used the horizontal plate and the lower diaphragm used the Vertical plate. This research performed 6 monotonic tension experiments describing the connection upside and downside in order to evaluate the structural capability of the offered connection. And the cyclic loading experiment was performed about 2 T-Type column to beam connections. As to the experimental result edge cutting geometry, there was no big effect. An increase in the number of holes of the plate ultimate strength was increased by 5% and The thickness of the plate increases, the maximum strength was increased by 4%. T-Type connections until it reaches the plastic moment showed a stable behavior.

• Journal of the Korean Home Economics Association
• /
• v.37 no.7
• /
• pp.17-27
• /
• 1999

According to the design method for constructing the Korean Men's Jo-go-ri(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic pattern Jo-go-ri, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip(Dongjung) was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symmetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar(Kit) and the collar strip create a visual effect by equalizing the lengths of the two sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since there is no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial regulation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment, can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the basic pattern design is as follows: 1) The conic angle for the Jo-go-ri's girth, length end neck width is fixed at 70(72) degree. 2) The radius of the cone is sleeve length. 3) The bust girth calculation formula is B/4 + 2.5 cm. 4) The armhole formula is B/4 + 2.5cm. 5) The neck width formula is B/10. 6) The ratio of the collar junction{width of collar(Kit) + width of collar strip(Dongjung) to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius of sleeve length, that is an arc that exceeds the length of the Jo-go-ri's midsection.

• Journal of Nutrition and Health
• /
• v.35 no.2
• /
• pp.183-191
• /
• 2002

The purpose of this study was to investigate the effect of dietary mushroom powder on blood glucose levels, seam lipid levels, glucose 6-phosphtase (G6Pase), thiobarbituric arid reactive substance (TBARS) and glutathione enzymes in diabetic rats treated with streptozotocin (STZ). Four groups of rats (Sprague-Dawley male rats, 180-200 g) were fed as follows: normal rats were fed a control diet (C), diabetic rats were file a control diet (CD), normal fats were fed a mushroom powder diet (M), and diabetic rals were find mushroom powder diet (MD). Diabetes was induced by single injection of streptozotocin (60 mg/kg B.W.). The animals were fed ad libium each of the experimental diets for five weeks. Food and water intake was determined every day. Blood glucose and serum total cholesterol levels were determined every week. After five weeks, the rats were sacrificed and blood glucose, serum total cholesterol, triglyceride levels and glutathione enzymes were measured. HDL-cholesterol levels were analyzed and LDL-cholesterol concentrations were calculated by equation. There was body weight loss in the diabetic rats, but the MD group showed less body weight loss than the CD group. Blood glucose and serum total cholesterol level of the MD group were lower than those of the CD group (p < 0.05). Also, serum total cholesterol of the M group was lower than that of the C group (p < 0.05). But the serum triglyceride level of the diabetic rats (CD and MD) was higher than that of the normal rats (C and M). However, there was no significant difference between the control diet group and the mushroom diet group. Serum HDL-cholesterol levels of the C group and CD group were higher than that of the M group (p < 0.05), and the MD group was not significantly different. But the serum LDL-cholesterol levels of the M group were lower than those of the C group (p < 0.05). Activity of hepatic microsomal G6Pase significantly increased in the CD and MD, reaching levels higher than those of the C and M groups. Hepateic gutathione S-transferase (GST, glutathione reductase (GR) and glutathione peroxidase (GPX) activity was not significant. But renal GST, GR and GPX activity in the MD group was lower than that of the CD group (p < 0.05). These results suggest that dietary mushroom reduces renal disorders such as oxidation and aging of tissue. In conclusion, dietary mushroom groups reduced blood glucose and cholesterol levels in STZ-induced diabetic rats and renal glutathione enzymes activity was averted in diabetic rats.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.69-84
• /
• 1996

The main current of ancient Korean thought is based on Yuk(易) : which solves the principle of creation of universe letter(文字) which is the principle of geometry and three elements thought of circle square . It's related to the creation principle of the universe and regarded as a sign that demons-trates shows the way to read the mathematical principle. The original form of Korean clothes(Han-Bock, 韓服) is represents the structure of hu-man body which reflects a small universe. So a good structure and meaning of the human body is well read in the formation of Korean clothes(Han-Bock, 韓服) and that is a good symbolization of the clothes(Han-Bock, 韓服) as the space of small universe. The good formation of Korean clothes(Han-Bock, 韓服) could be shown by cutting out straight bending twisting and turning each straitly cutting piece is applied to its trans-tormation. Geametical formation with obvious sym-metric dividing of front-back left-right and top-bottom is well shown in Korean clothes by twisting Yuk(易) or m bius strips. So we can find out whole formation by representing only either 'front and back' or 'left and right' and also sa-pok(사폭) of man's trousers seop(섶) of jeo-go-ri(short jacket 저고리) kyut-ma-gi(곁마기) of Sam-hwai-jang jeo-go-ri (삼회장 저고리), mu(무) of jig-ryung(straight collar and long and wide sleeved robe, 直領) trouser wide and ga-rae-ba-dae(가래바대) of dan-cok-kok(woman's under trousers). The formation line of Korean clothes(Han-Bock, 韓服) is based on theprinciple of unlimited m bius strips by twisting of turning direction from universal principle and original basic form is not changd even by turning in-side out. Unity of the whole and part in Korean clothes(Han-Bock, 韓服) could be found in nonorientable thought(非始原思想) which represents the unity and dependence kil(길) of jeo-go-ri(short jacket, 저고리) and po(long and wide sleeved robe, 袍). Selva-gewise(식서방향) of sleeves and seam of out-side of kil(길) and outside of seop(섶) are directed to outside of seop(섶) inside of seop(섶) is to kil and direction of inseam of kheut-dong(끝동) and kyut-ma-gi(곁마기) is directed to sleeves. Korean clothes(Han-Bock, 韓服) is usually made by cutting fabric for several parts and sewing them and the way to make Korean clothes is deeply related to the theory of chon-pu-kyung jong-il and il-seok -sam-geuk. As the development of men's consciousness is pro-gressed from total separation to separation and superseparation. Sewing process of korean clothes(Han-Bock, 韓服) can be make single dimension to double or triple dimension of korean clothes(Han-Bock, 韓服) silhoutte bacause it can be include principle of topology as noneuclity.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.238-245
• /
• 1996

Microbial desulfurization characterlstics of a bituminous coal have been determined by using Thiobacillus ferrooxidans. The effects of process variables (such as coal pulp density, particle size and addition of surfactants) on pyrite removal have been investigated in both shake and airlift-bioreactor culture experiments. In shake experiments, pyrite could be removed over 78% for pulp densifies below 20% (w/v) and removed below 40% for pulp densities over 30% (w/v) in 8 days. Pyrite removal decreased with increasing pulp densities, and it also decreased sharply with increasing particle sizes. In airlift bioreactor experiments, pyrite at 50% (w/v) pulp density could be removed about 50%. Its value is much higher than 15% at the same pulp density in a shake experiment. With addition of surfactants, pyrite removal was enhanced in shake experiments significantly, whereas it was slightly decreased in an airlift bioreactor experiment.

• Journal of the Korean Society of Costume
• /
• v.26
• /
• pp.221-232
• /
• 1995

It was aimed to study the costume of Koryo dynasty based upon the one hundred and thirty four pictures of the engraved painting on the wood. The costume to study were made about 400 years during the King Mok-jong(1006) to the forth year of the king Wu based upon the Avatamaka Sutra and Pulsul-Yaesu 가) Men's wear 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan, Kun, and Mo. The young boys binds his hair up one, two, and three knots. 2. Clothes : 1) King wore an uniform of Mien-lu Kuan system. 2) The Crown Prince and high rank officials wore Yuan-yu-Kuan Won-jung-po-ju-Kuan, Sa-bang-Kuan, Yun-wha-Kuan and montain shape Po-ju-Kuan as a court dress. 3) Officials put on the Pok-du as an official dress and Won-jung-ip-mo, Kun and Mo as an everyday dress, the monk put on the diamond shape Do-kuan and Du-kun and the soldier put on the Helmet. Costume system of man was as follows ; They wore exchanged shape collar, big sleeve jacket, long skirt, apron, hanging precious stone big belt as a Mien-pok. 4) The soldiers wore helmet, Keun-Kap, Scarf, Pee-Bak, Hung-Kap, Pok-Kap, Yang-Dang-Kap, We-Yo-Kap, Kum-Kap, and caries arms. Lower-level officials wore Pe-Bal, Kun-Mo, gae, won-leung, very small sleve jacket, a long coat reaching up to the knee length, slacks, belt, loin cloth and apron. 5) Children's bind their hair up angle shape and wore a half long jacket raching up to the hip and slacks. 나) Women's wear; 1. hair style and hair dress; 1) High rank women's hair style was very extravaganceful. They made their hair top knot (one, two, or more knots) and decoraed precious stone, pan shape head dress, wheel shape head dress, and flower shape precious stone decorated head dress. 2. Clothes ; 1) High rank ladi's wore Kun-Kyun attached jacket, and jacket sleeves decorated pleats, and pleats decorated long skirt, apron, back apron, knot belt, scarf, this type is the same with Dang Dynasty, five dynasty of china, Song, Kum, Won, Myung Dynasty, and our costume of Poe-hae, and Shilla Dyansty. 2) Official ladies wore exchange shape collor, big sleeve jacket, long pleats skirt, apron, and back apron, scarf. 3) Women wore top knot hair style and decorated by ribbons. Shoulder scarf attached small sleeve jacket and wore reaching up to the knee length. Side seam is open and under wear was long skirt. 4) High knot hair style and exchanged shape collor jacket, under wear wore long skirt. They wore under skirts and the jackets. 5) High knot hair style, exchange shape collor jacket reaching up to the knee length small sleeve under wear wore long skirt, belt. 6) High knot hair style, big sleeve jacket and long skirt. 7) Foot wear wore boots, mokasin type shoes, sandal.

• Journal of Fashion Business
• /
• v.11 no.5
• /
• pp.35-50
• /
• 2007

The purpose of this study was to investigate the result of a market research on men's jacket in their age of 25 to 35, who wear fitted jackets most, and to examine the comparative analysis of pattern and the wearing evaluation between classic jacket and fitted jacket. The results are as follows; Firstly, according to the results of a market research, 32.0% of the target owned fitted jackets, and 28.7% expressed their desire to buy only fitted jackets. This means their concern and preference for fitted jacket with which they could show up young, fresh and slim look are as high as those for classic jacket. Secondly, classic jacket showed the higher value than fitted jacket in such items as chest girth, waist girth, hip girth, sleeve's hem girth, jacket length, shoulder length, side seam length, and across shoulder point length. On the other hand, fitted jacket showed the higher value than classic jacket in back armhole length, front length, collar point length and sleeve's vent length. Thirdly, classic jacket was larger than fitted jacket in 1/2 chest girth(1.0cm), 1/2 waist girth(2.0cm), 1/2 hip girth(1.0cm), back width(0.5cm), front width(0.5cm) and side width(1.0cm). However, fitted jacket was higher than classic jacket in the armhole depth(0.5). Fourthly, the results of appearance evaluation revealed that there was a significant difference in 6 items. In other words, classic jacket was evaluated more appropriate than fitted jacket in such items as back width, back length, back neck depth, chest girth, waist girth and hip girth. And the fitted jacket had a higher value than the classic jacket in shoulder angle item. Fifthly, In the functional evaluation, fitted jacket was evaluated more uncomfortable than classic jacket. And this means that fitted jacket doesn't have a proper ease amount in each part and it has a high armhole depth compared to classic jacket. Therefore, for more comfortable patternmaking of fitted jackets, it would be required a pattern design which reflect men's own shoulder lines and women designers' flexibility that will satisfy both appearance and function.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.5
• /
• pp.545-566
• /
• 1999

The use of pure titanium and titanium alloys have been increased recently in fixed, removable prosthodontics and implant fields as a framework. But when they were used for superstructures of implant or metal framework of removable prosthesis, welding is necessary to reconnect the fracture site to control the casting distortions. To overcome the difficulties in soldering the titanium due to high oxidation property, much effort have been devoted. In this study, some of mechanical properties were compared between pure titanium and Ti-6Al-4V alloy by using after welding, electron beam welding technique and tungsten arc welding. Mechanical properties such as tensile strength, yield strength, elongation and microhardness were measured. And, in order to compare the effect of welding site and surrounding metal tissue according to the welding condition, SEM photographs were taken and element distribution was observed by Wave Dispersion Spectroscopy. Through analyses of the data, following results were obtained; 1. In items such as tensile strength, yield strength and elongation according to the welding techniques of pure titanium, only tungsten arc welded group showed significant lower value than other groups(P<0.05). 2. In items such as tensile strength and yield strength according to the welding techniques of Ti-6Al-4V alloy, control group and tungsten arc welded group showed significant difference among all the groups(P<0.05). 3. Ti-6Al-4V alloy exhibited significantly greater elongation than control group when the laser welding method and electron beam welding method were used, and elongation showed increasing tendency. 4. Pure titanium specimens exhibited increasing tendency of microhardness regardless of the weld-ing technique applied, and especially tungsten arc welded group demonstrated a great increase of microhardness than parent metal. 5. There was no hardness change in laser welded group and electron beam welded group of Ti-6Al-4V alloy, but in tungsten arc welded group, hardness changed greatly from parent metal to weld seam. 6. Through the metallographic examination and scanning electron microscopy, laser welding caused central fusion and recristallizations were formed and tungsten arc welding caused localized fusion to 0.3-0.7mm from the surface.

• Journal of the Korean Society of Costume
• /
• v.19
• /
• pp.105-125
• /
• 1992

The research, aiming an automatic pattern design of Korean Costume by utilizing CAD system, tried Grading, Seaming and Marking with a theme of girl's color-strip blouse & skirt. The content & conclusion of the research can be outlined as follows; 1) As we reviewed the current situation of Korean costume which becomes more likely celebrational or festival costume, while the demand of it is getting increase, it's being dealt mostly as ready-made dresses with different qualities & designs. Especially childrens ready-made ones were highly demanded to be picked up as the theme. 2) For the original drawing of children's color-strip blouse & skirt, Kyung-Ja Park's drawing method was used here, and for the substitute of particular body parts absolute size, Joo-Won Lee's standard size chart from a size-study by ages. 3) To work with CAD system we had input master pattern, drawn for age 5 as basic size, then graded six step-sizes for 1-11 years old. For add-subtract of particular body parts size, we graded through computing the standard variation among items to get the pattern developed into ready-made standard size, we can make precise plotting by grading wanted size very rapidly if we correct the rule of changed items different from standard size to make utilization possible enough with easy order method of ready-made Korean Dress. 4) We produced Marker after attaching a margin to seam accordingly by parts for each pattern using P/D/S to mark, In mass gament-cutting, the loss of time and material can minimized. In this research the apparel CAD system which has been utilized and only be western fashion industry was introduced for the design of ready-made Korean costume and utilized it in Grading, Marking which are critical steps to improve productivity and have reported the result in the research. Thus we expect that less cost, improved productivity and better quality with minimized loss of material from marking as well as from prompt and precise size-drawing. Furthermore the utilization of CAD system is considered as an effective one in terms of the research & the development to remove effective one in terms of the research & the development to remove irrational elements in the design and production process of Korean costume as well as in terms of the study of Korean Costume development through creative works of Korean Costume.