• 한국초전도ㆍ저온공학회논문지
• /
• 제26권1호
• /
• pp.25-30
• /
• 2024

High-temperature superconducting rotors offer advantages in terms of output-to-weight ratio and efficiency compared to conventional phase conduction motors or generators. The rotor can be cooled by conduction cooling, which attaches a cryocooler, and by refrigerant circulation, which uses circulating liquid or gas neon, helium and hydrogen. Recent work has focused on environmental issues and on high-temperature superconducting motors cooled with liquid hydrogen that can be combined with fuel cells. However, to ensure smooth supply and return of the cryogenic cooling fluid, a cryogenic rotational coupling between the rotating and stationary parts is necessary. Additionally, the development of a sealing structure to minimize fluid leakage applicable to the coupling is essential. This study describes the design and performance evaluation of a non-contact sealing method, specifically a labyrinth seal, which avoids power loss and heat load caused by friction in contact sealing structures. The seal design incorporates a spiral flow path to reduce leakage using centrifugal force, and computational fluid dynamics (CFD) simulations were conducted to analyze the flow path and rotational speed. A performance evaluation device was configured and employed to evaluate the designed seal. The results of this study will be used to develop a cryogenic rotational coupling with supply and return flow paths for cryogenic applications.

• 한국진공학회지
• /
• 제15권1호
• /
• pp.57-63
• /
• 2006

진공 인라인 실장기술에 의해 제조된 프라즈마 디스플레이 패널(PDP)의 전기적 및 광학적 특성을 분석하였다. 분석결과, 초기 진공도가 증가함에 따라 발광효율이 증가함을 확인하였다 즉, $1\times10^{-3}$ torr의 진공도인 경우에 대해서는, 동작전압이 235 V(방전가스의 압력을 400 Torr일 경우) 이고 발광효율이 0.8 1n,/W(180 V의 유지전압에 대해) 인데 반해 초기 진공도가 $1\times10^4 torr$일 경우에 대해서는, 동작전압이 215V로 낮아졌고 발광효율은 2.5lm/W로 향상되었음을 확인하였다. 더불어, 진공 인-라인 실장 방법을 이용하여 tip-]ess형 PDP 동작 패널을 성공적으로 제조할 수 있었다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
• /
• pp.87-95
• /
• 2005

삼중수소를 사용하는 자발광유리관의 제조에 필요한 4가지 핵심 기술 중 레이저를 이용한 밀봉/절단기술을 개발하였다. 상용 제품을 분석한 결과 유리관의 재질은 pyrex 이었고 레이저는 유리가공에 적절한 펄스형 이산화탄소 레이저를 사용하였다 유리관의 밀봉/절단에 영향을 미치는 인자들로는 레이저빔의 강도 지속시간 조사 방법, 유리관 내부의 압력 등이었다. 전 공정은 2단계로 이루어져 1단계에서는 삼중수소를 주입하고 유리관의 양단을 밀봉하였으며 2단계에서는 삼중수소가 봉입된 유리관을 원하는 길이로 밀봉/절단하였다. 각 공정에서 유리관의 밀봉은 defocusing된 레이저빔을 사용하였으며 절단은 focusing된 빔을 사용하였다. 밀봉/절단 후에는 잔여 열응력에 의한 파열을 방지하기 위하여 열처리를 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.307-308
• /
• 2006

We have synthesized $CaS:Eu^{2+}$ phosphor by using a sealing vessel and evaluated its photoluminescence properties. The method using a sealing vessel is simple and economical in comparison with other methods reported up to date, As an activator concentration was increased from 0.1 mol to 4 mol, the main emission wavelength of the phosphor was increased from 642 nm to 651 nm due to crystal field splitting of 5d level of $Eu^{2+}$ ions. Although the same amount of $Eu_2O_3$ was used, the concentration of the activator ions which were reduced from $Eu^{3+}$ to $Eu^{2+}$ and substituting $Ca^{2+}$ ions was increased with increase of firing temperature. Therefore, the main emission wavelength was also increased from 645 nm to 651 nm with increase of firing temperature from $1100^{\circ}C$ to $1300^{\circ}C$.

• 한국재료학회지
• /
• 제8권12호
• /
• pp.1121-1126
• /
• 1998

평판디스플레이용 진공패널의 제작시 진공으로 유지된 패널을 구성하는 유리판이 받는 응력과 변위를 계산하였다. 유리판의 두께, 패널의 크기 및 실링폭의 크기를 변수로 하여 실제로 진공패널을 제작한 후 패널의 파괴양상과 변위를 측정하였다. 유리판의 파괴양상과 변형측정을 통하여 유리판에 걸리는 최대응력은 테두리부분에 걸리는 것을 확인하였다. 제작된 진공패널이 갖는 응력분포 및 변위의 분포는 패널을 진공실링할 때 사용한 실런트의 폭에 크게 의존하였다. 패널의 실링폭이 커질수록 모서리가 완전 고정된 조건으로 계산한 결과와 유사하였다. 두께가 3mm인 유리판을 사용해서 $80$\times$120textrm{mm}^2$ 크기의 패널을 제작할 때 실링폭이 20mm인 경우 측정된 변위는 $57\mu\textrm{m}$였으며, 이 값은 모서리가 완전히 고정된 조건으로 계산한 갈인 $54\mu\textrm{m}$와 비슷하였다.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.1000-1007
• /
• 2001

진공관형 태양열 집열기에서는 열관(heat pipe)과 붕규산염 유리관의 안정된 접합이 이를 장시간 사용하는데 매우 중요하다. 구리와 유리는 그 물리.화학적 성질에 큰 차이가 있어 접합하기가 어려움으로 구리관 표면에 유리와 화학적 결합이 용이한 산화막을 생성시켜 접합하도록 구리의 산화상태, 접합계면 및 접합강도를 XRD, SEM, EDS 및 인정시험기로 측정하였다. 순수 구리는 $600^{\circ}C$ 이하로 열처리하였을 때 Cu$_2$O 산화막을 생성하였으나 그 이상의 온도에서는 CuO 산화막을 형성하였으며 후자의 산화막은 구리와의 접합력이 매우 불량하였다. 그러나 붕사로 표면 처리를 하였을 경우에는 80$0^{\circ}C$에서도 Cu$_2$O 산화막 만이 발견되었다. Cu$_2$O 산화막을 생성시킨 구리관과 붕규산염 유리관을 Housekeeper법으로 접합하였을 경우 354.4N의 접합강도를 얻을 수 있었으며 열충격 저항성도 매우 뛰어났다.

• 설비공학논문집
• /
• 제26권3호
• /
• pp.137-143
• /
• 2014

A gasket is known as an important component for mechanical sealing between mating surfaces. In case of the refrigerator, a gasket is generally installed into the edge line of a door to prevent cold air leaking out from the inside of a cabinet. The gasket shape used in a refrigerator is very complicated; it has a few deformable small rooms and wings (upper part) and inserting part (lower part) into the door. By the intricate shape, it takes much time and trouble on analysis by using a full-shape model. To settle down this problem, an effective design way of a gasket is proposed in this work. The inserting part is parametrically designed using FEM without considering the complicate upper part, Through this work, computational time and efforts are much reduced comparing to the full-shape analysis method. And the performance of a newly designed gasket was evaluated qualitatively.

• 한국표면공학회지
• /
• 제46권4호
• /
• pp.162-167
• /
• 2013

Encapsulation is required since organic materials used in OLED devices are fragile to water vapor and oxygen. Laser sealing method is currently used where IR laser is scanned along the glass-frit coated lines. Laser method is, however, not suitable to encapsulating large-sized glass substrate due to the nature of sequential scanning. In this work we propose a new method of encapsulation using Joule heating. Conductive layer is patterned along the sealing lines on which the glass frit is screen printed and sintered. Electric field is then applied to the conductive layer resulting in bonding both the panel glass and the encapsulation glass by melting glass-frit. In order to obtain uniform bonding the temperature of a conductive layer having a shape of closed loop should be uniform. In this work we conducted simulation for heat distribution according to the structure of a conductive layer used as a Joule-heat source. Uniform temperature was obtained with an error of 5% by optimizing the structure of a conductive layer. Based on the results of thermal simulations we concluded that Joule-heating induced encapsulation would be a good candidate for encapsulation method especially for large area glass substrate.

• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.185-190
• /
• 2001

The purpose of this study is the development of practical Dry floor tile unit method that settle the defect of a wet method and designed for resin mat. With use of PE resin which is confirmed the basic property, it is developed that resin mat, joint-sealing compound with fixed form and space management to Dry floor tile unit method. The result of this study is below. 1) To acquire above the 4kgf/$\textrm{cm}^2$ - construction specification criterion, the bonding space that between resin mat and tile has to occupy the 50% of resin mat module space(10,000$\textrm{cm}^2$). 2) Criteria of bonding part plane is below. simpleness of metal form. productivity, uniform quality after injection molding cooling, easy cutting for remain space management, adhesive property, construction ability, transformation of a severed piece under pressure and so on. 3) To get the shape that could protect the interfacial breakdown, it is designed that resin mat and tile are unified after the bond input. 4) Adapted joint-sealing compound is the material of urethane kinds wedge form. Resin mat has the water passageway that could drain the water. 5) To manage the severed piece of tile, the resin mat is likely to divide the half and the quarter and the plastic drainage is developed in the severed piece.

• 한국전기전자재료학회논문지
• /
• 제30권7호
• /
• pp.407-412
• /
• 2017

This paper introduces a biocompatible packaging system for implantable medical device having a hermetic sealing, such that a perfect physical and chemical isolation between electronic medical system and human body (including tissue, body fluids, etc.) is obtained. The hermetic packaging includes an electronic MEMS pressure sensor, power charging system, and bluetooth communication system to wirelessly measure variation of capacitance. The packaging was acquired by Quartz direct bonding and $CO_2$ laser welding, with a size of width $ 6cm{\times}length\;10cm{\times}lheight\;3cm$. Hermetic sealing of the packaged system was tested by changing the pressure in a hermetic chamber using a precision pressure controller, from atmospheric to 900 mmHg. We found that the packaged system retained the same count or capacitance values with sensor 1 - 25,500, sensor 2 - 26,000, and sensor 3 - 20,800, at atmospheric as well as 900 mmHg pressure for 5 hours. This result shows that the packaging method has perfect hermetic sealing in any environment of the human body pressure.