• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.4
• /
• pp.91-98
• /
• 2000

The present study is the first attempt involving quantification of the different types of debris found on the seabed of Chinhae Bay in the South Sea of Korea. Eleven cruises were undertaken to collect marine debris samples by bottom trawling from February in 1998 to January in 1999. The tows were conducted over a period of 60-90 min, and eight types of debris were counted: plastic, fishing gear, metallic objects, wood, rubber or leather, glass, textile and the others. Results are obtained based on the number and weight of the objects classified as per eight categories and station for a trawling period. The results of this study are that the number and weight of debris found per unit of swept area (1 hectare) were surveyed as 27.8(1,612 in total) and 3,130 g(193,820 g in total), and plastic and fishing gear have the most composition of marine debris by number, on the other hand, metallic objects and fishing gear have the most composition of marine debris by weight.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.15-20
• /
• 2008

Contaminated sediments are the actual cause for deterioration of coastal-ecosystem. So the developed countries have been in the process of making an effort to develop new techniques for monitoring and solving this problem since 1960. In this research, suction type pump dredging system of pilot size for collecting the filth from the seabed has been designed and manufactured that can prevent or minimize the secondary pollution by filth diffusion. For the practical use, the application possibility of the developed system has been checked through a system performance test. And, the evaluation of system performance according to the underwater body type has been carried out for system optimization by using CFD. The performance tests for checking the efficiency of sediment collecting system are done under two conditions i.e. when the system is non-operational and when the system is self-propelled. The results of this research showed the possibility of the development of dredging system to remove just the upper parts of filth from seabed.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.41-49
• /
• 2014

Detection and processing techniques for small objects on seabed by the active synthetic aperture sonar can be increased the detection performance because it can be used by short sensor array in small unmanned underwater systems that are spatially constrained. But the limited conditions on constant speed and straight movement of the platform cause a large error in the number of external environmental factors and exact phase synthesis process. In this study, analyzed the applicability of active synthetic aperture processing that is mounted on such a system, and compared detection resolution change in accordance with the phase difference mismatch caused by the along track disturbance. Various simulations were performed as a coherently focus processing model by adding along track disturbance mismatched parameter on the configuring simulator. As the result, detection performance of active synthetic processing for small objects on seabed was found a number of changes by the phase difference mismatch errors according to track disturbances and S/N ratio variations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.743-749
• /
• 2015

In this paper, we describe the dynamic tumble-stability analysis of a seabed-walking robot named Crabster (CR200) in forward-incident currents. CR200 is designed to be operated in tidal-current conditions, and its body shape is also designed to minimize hydrodynamic resistances considering hydrodynamics. To analyze its tumble stability, we adopt the dynamic stability margin of a ground-legged robot and modify the definition of the margin to consider tidal-current effects. To analyze its dynamic tumble stability, we use the estimated hydrodynamic forces that act on the robot in various tidal-current conditions, and analyze the dynamic tumble-stability margin of the robot using the estimated results obtained for the various tidal-current conditions. From the analyses, we confirm the improved tumble stability of the robot according to the movement of the tumble axis caused by the supporting points of the legs.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.85-96
• /
• 2011

A breakwater is a important structure for both calmness of harbor and protection of the port facilities from waves generated from typhoons or wind. This study adopted the rubble mound breakwater, which is one of the most popular type of breakwaters in Korea. Rubble mound breakwater had been designed by considering only static condition previously. Recently, a dynamic wave-load due to waves has been also considered in designing breakwater. In design, the wave-load is assumed as an uniform load which only acts in the front slope of the breakwater. However, the assumption is not applicable in reality. In this study, therefore, a real-time wave-load acting on the breakwater instead of the uniform load is considered, and it is assumed to be acting on the seabed too. Based on the numerical analysis, it is found that there is a significant difference in the maximum settlement compared with the result predicted by the existing design method.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.836-845
• /
• 2016

The variation and structure of the cold water mass around Ganjeol Point during the summer of 2011 were studied using data from CTD observations and temperature monitoring buoys deployed at 20 stations off the southeast coast of Korea. There was a $-12^{\circ}C$ surface temperature difference between the cold water mass and normal water during the monitoring period. Variations in the isothermal lines for surface temperature along the coast showed that the seabed topography at Ganjeol Point played an important part in the distribution of water temperature. Cold water appeared when the wind components running parallel to the coast had positive values. The upwelling -response for temperature fluctuations was very sensitive to changes in wind direction. Vertical turbulent mixing due to the seabed topography at Ganjeol Point can reinforce the upwelling of cold bottom water. From wavelet analysis, coherent periods found to be 2-8 days during frequent upwelling events and phase differences for a decrease in water temperature with a SSW wind were 12-36 hours.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.6
• /
• pp.73-81
• /
• 2012

Safety issue for offshore wind-turbine foundation becomes a crucial factor as offshore wind turbines have been scaled up. Correspondingly, there is a demand to understand the effect of soil-structure interaction on to system behavior in geotechnical engineering point of view. The p-y curve method researched in past few decades is one of the most appropriate methodology to analyze the problem. In this study, recently proposed p-y curve models for various rocks are calibrated to analyze the engineering characteristics of seabed of Jeju Island where it is known to be most suitable area for offshore wind energy farm. Step by step calibration process for p-y models is presented. Analysis results show that subgrade reaction generally increases as closer to seabed. It is also shown that the behavioral characteristics of foundation reflect well rock properties in terms of resultant moment, shear force, etc.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.57-61
• /
• 2004

According to the research result of existing regarding the seabed organic sediment, contamination it flows from the land and the sea become the enemy in the coastal water. It was caused with the summer season water temperature rise and dispersing recall respect advancement. Phosphorus which is a main reason of red tide actual condition came to reveal vast quantity with the facts that it gushes. Specially, in the case of the coastal closing waters and the nursery, as the corpse and the fresh fish washing veterinarian was imbrued, it is the actual condition where is more deepened. Consequently the development of shallow layer dredging method of that suction power which is stabilized is demanded to be able to dredge only the sediment layer which has not become the pressure and is a main reason of being imbrued. The dredging methods using the pressure difference minimize the suction of the seabed sediment. This method is stable that suction power which occurs from guard difference of the guard and the guard of the dredging system inland water. That's why it is possible to sort dredging of the organic sediment ranging in upper layer sediment and it will be able to expect the minimization of dredging quantity. Increase of the expense that it followsin orthocenter with the fact will not grow. Because the pressure difference of the dredger inland water is occurred by the suction power. Maintenance administrative costs are reduced, because the one of smallest dredging system maneuvers and the barge which affixes an integrated operation system is mainly in a resting. To reduce a dredging hour, it will be able to solve in the condensed water as operating the jar guard post.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.22-26
• /
• 2013

The purpose of this study was to improve the design of a mooring line by attaching a lumped mass to it on the seabed. A numerical analysis of the redesigned mooring system is performed to analyze the effect of the weight of the attached lumped mass using the commercial software Orcaflex. The ultimate tension of the mooring system with the lumped mass is compared with that of a bare mooring line in the original design. An appropriately designed weight for the lumped mass is found to induce a critical lifted point in the mooring line by floater motion in the ultimate condition to move toward the floater position from the anchor point, while maintaining a similar safety factor for the mooring line. On the other hand, it is shown that excess weight for the lumped mass induces snapping in a mooring line, resulting in low safety factor for the mooring system. The distance between lumped weights is shown to be a minor parameter affecting the safety of a mooring line, although a shorter line has an advantage from an economic point of view. Using the optimal weight for the lumped mass attached to the mooring line on a seabed reduces the mooring line length and installation area occupied by a mooring system under real sea conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.6
• /
• pp.1030-1035
• /
• 2021

Diving fishermen are demanding permission to use an inspirator that can efficiently catch Manila clam; however, coastal fishermenargue that the use of inspirator devastates the seabed and depletes fishery resources. Therefore, the aim of this study was to evaluate the fishing power of diving gears and its effect on coastal fishing grounds. The average time taken to fish in the seabed (4 m²) with a rake, water gun, and an inspirator was 11.17 min, 13.33 min and 7.81 min, respectivelyThe values of catch per unit time with a rake, water gun, and an inspirator were 3.35 kg/min, 2.26 kg/min, and 3.83 kg/min, respectively. Suspended sediments were observed the most in the water gun fishing area, and were observed more in April when fishing was not carried out than in February when fishing was carried out. However, the difference in the amount of sediment deposited in the fishing area using the three-fishing gears was very small. For an accurate analysis of the impact of the fishing gears on the seabed, supplementary tests such as grain size analysis and changes in benthic organisms need to be conducted.