• 동력기계공학회지
• /
• 제7권4호
• /
• pp.25-30
• /
• 2003

Hydrocyclone has been widely used for the solid-Liquid separation in many industrial sites because of its comparatively preferable applications that can be applied to wide-range panicle sizes. If seawater with impurities flows through pumps or heat exchanger, it might cause an decrease in efficiency of cooling system. In this paper, we have suggested solid methods of separating impurities from seawater in the cooling system by using a Hydrocyclone. The effects of design factors as solid concentration, cyclone inlet pressure, flow rate and diameter of underflow on the seperating performance of the Hydrocyclone were investigated. The results from the study are summarized as follows: 1) In proportion to the increase of solid concentration, the efficiency of solid-liquid separation is improved. 2) According as the cyclone inlet pressure increases the efficiency of separation is improved. Conclusively, this research suggested that the Hydrocyclone will be used as a pre-treatment system of cooling water in ships, and eventually prevent unexpected accidents in engine systems.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.124.2-124.2
• /
• 2010

Generally, a coolant of the nuclear power plant is manufactured by electrolyzing the sea water near the plant for making the sodium hypochlorite(NaOCl), which is used for sterilizing the bacteria and the shellfishes sticking to the drains or the pumps at the outlet of the cooling system due to $8-10^{\circ}C$ warmer temperature than the inlet sea water. During manufacturing the sodium hypochlorite, the hydrogen with the high purity is also produced at the anode side of the electrolyzer. This paper describes a novel power plant system combined with the polymer electrolyte membrane(PEM) fuel cell, the wasted hydrogen from the sea water electrolyzer and the wasted heat of the nuclear power plant. The present status over the exhausted hydrogen at twenty nuclear power plants in Korea was investigated in this study, from which an available power generation is estimated. Furthermore, the economic feasibility of the PEM fuel cell power plant is also evaluated by a current regulations over the power production and exchange using a renewable energy shown in Korea Power Exchange(KRX).

• 수산해양기술연구
• /
• 제35권2호
• /
• pp.196-200
• /
• 1999

In the case that erosion and corrosion occurs in machinery and structure at the same time, the synergy effect by erosion-corrosion affects fatal effect to durability of machinery and structure. Therefore, in machinery and structure which use corrosion liquid, the study of the synergy effect of erosion-corrosion which affects metal material is requested. In this paper. the flow corrosion experiment about the effect of temperature change and liquid velocity change in sea water was carried out to study the characteristics of erosion-corrosion for tube material Cu heat exchanger The main results obtained are as follows. (1) Damage appearance of tube outside by erosion-corrosion becomes dull because electrode potentials of Cu tube is higher than electrode potential of STPG38 shell. (2) In the cooling system by sea water, the weight loss rate of Cu at tube outside liquid temperature of $70^{\circ}C$ is higher than that of temperature of $20^{\circ}C$. (3) In cooling system by sea water, the weight loss rate of Cu at liquid velocity of 5.1m/s is higher than that of velocity of 1.47m/s. But as the testing time passed, the weight loss rate of Cu at velocity of 5.1m/s is almost steady and becomes dull at velocity of 1.47m/s.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.287-287
• /
• 1999

• Corrosion Science and Technology
• /
• 제10권6호
• /
• pp.218-224
• /
• 2011

The fresh water and sea water in present ships is used as cooling water for marine engine. Therefore, corrosion damage in seawater system is frequently occurred. In particular, in the impeller of pump, the performance and material span due to the corrosion and cavitation erosion has adverse effects. Most of the pump impellers in vessels are used Cu-Al alloy. Cu-Al alloy which having the excellent mechanical properties and corrosion resistance is widely used in marine environments. However, despite the excellent characteristics, the periodic replacement parts due to the cavitation damage in seawater is vulnerable to economic viewpoint. In this study, Cu-Al alloy used with impeller for centrifugal pump were conducted various experiments to evaluate its characteristics in seawater and fresh water solutions. As an electrochemical result, the dynamic conditions that exposed to the cavitation environment presented high corrosion current density with collapse of the cavity compared with the static conditions. Cavitation test results, the weightloss and weightloss rate in fresh water are observed more than those of seawater.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1108-1112
• /
• 2005

Recently, the fuel charge is accounted for very high in the navigation cost. Therefore Shipowner is tried to find method for reducing oil consumption. ERCS(Energy Reduced Cooling System) is one of the method. The ERCS algorithm operates to decrease a power consumption of main sea water cooling pump through inverter control. We have developed ERCS controller with algorithm. The ERCS controller consists of CPU board, Digital I/O board, A/D board, D/A board and LCD/SW board. We tested with dummy signal to confirm the algorithm working correctly and achieved the good results. Before soon we will test under real condition in the ship and expect to get the result as forecasted.

• 한국수산과학회지
• /
• 제40권2호
• /
• pp.102-107
• /
• 2007

A remarkable sea surface cooling (SSC) event was observed in the eastern sea of Korean peninsula based on new generation sea surface temperature (NGSST) satellite images in September 2005, when typhoon Nabi passed over the East Sea. The degree of SSC ranged from $1^{\circ}C\;to\;4^{\circ}C$, and its maximum was observed in the southeastern sea area. Daily variations in sea surface temperature at a longitudinal line $(35^{\circ}-41^{\circ}N,\;132^{\circ}E)$, derived from satellite data for September 1-13, 2005, showed that the SSC lasted about 3 days after the typhoon passed in the south of $39^{\circ}N$, whereas it was unclear in the north of$39^{\circ}N$. Water temperature measured by a mooring buoy suggested that the SSC was caused mainly by a vertical mixing of the water column driven by the typhoon, rather than by coastal upwelling.

• 한국음향학회지
• /
• 제26권6호
• /
• pp.286-292
• /
• 2007

해수연결 배관계에서 발생되는 주요한 소음원은 함 내부 탑재장비의 원활한 작동을 위해 해수를 순환시키는 해수순환 펌프이다. 이러한 펌프에서 발생되는 토널 성분을 가지는 유체전달 소음은 적절한 소음감소기를 통해서 감소되어야 한다. 본 논문에서는 실험적으로 유체전달 소음감소기의 음향 투과손실을 측정하기 위해서 해수연결 배관계의 끝단 반사가 존재하는 경우 배관 내의 음파를 입사파와 투과파로 분리하는 전달함수 기법을 제안하였다. 제작된 소음감소기 시험시편에 대한 이론적 투과손실과 제안된 기법을 통해 측정된 투과손실이 관심 주파수 영역에서 잘 일치함을 확인함으로써 기법의 타당성을 검증하였다.

• 한국항해항만학회지
• /
• 제42권1호
• /
• pp.9-16
• /
• 2018

인류의 한정된 석유자원의 개발은 유가의 상승과 함께 필연적으로 심해지역의 유전을 탐사하고 개발하고 있다. 이러한 심해지역에는 심층수의 온도가 약 $4^{\circ}C$이고 표층수의 온도는 약 $30^{\circ}C$로 이때의 온도 차이를 이용하여 발전설비를 가동하는 Ocean Thermal Energy Conversion(OTEC) 기술에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 기존의 심해지역에 설치되는 FPSO(Floating Production Storage Offloading; 부유식 생산설비)에서 수심 100m의 해수를 냉각수로 이용하는 조건을 400m까지 변경하는 조건으로 하고, FPSO에서 냉각수로 사용되고 배출되는 해수를 이용하여 Discharged Thermal Energy Conversion(DTEC) 발전장치를 적용하는 방안을 설계하고 해석하였다. 기존의 설계 수심보다 깊은 수심에서 냉각수를 취수하여 DTEC 시스템을 적용하면 수심에 따라 보다 많은 전력을 생산할 수 있는 시스템의 설계가 가능한 것을 확인하였다. FPSO와 OTEC 발전설비의 유사성을 고려하였을 때, 심해지역의 FPSO에 DTEC 시스템을 적용하여 기술을 축적하고 유전의 수명이 다한 뒤에 OTEC 발전설비로 개조한다면 자원개발과 지속가능한 발전이라는 두 가지 중요한 과제를 이룰 수 있을 것이다.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.1-7
• /
• 2011

This study was accomplished to evaluate the performance of Multi Effect Distillation(MED) for solar thermal desalination system. It was designed Multi effect distillation with $3m^3$/day capacity and Shell&Tube type heat exchanger. Also, The effective heat transfer of Shell&Tube heat exchanger was used Cu(90%)-Ni(10%) corrugated tube. The parameters relating to the performance of Multi Effect Distillation are known as hot water flow rate. The experimental conditions for each parameters were $18^{\circ}C$ for sea water inlet temperature, $6m^3$/hour sea water inlet volume flow rate, $75^{\circ}C$ for hot water inlet temperature, 2.4, 3.6, and $4.8\;m^3$/hour for hot water inlet volume flow rate, respectively. The results are as follows, Development for Multi effect distillation was required about 40kW heat and 35kW cooling source to produce $3m^3$/day of fresh water. Based on the results of this study, It makes possible to secure economics of desalination system with solar energy which is basically needed development of high efficiency fresh water generator.