• 한국해양공학회지
• /
• 제27권6호
• /
• pp.112-118
• /
• 2013

This paper reports the results of a comparative study on rudder performance between the steel rudders that have been used in coastal angling fishing boats in the 20-GT class and the newly developed FRP composite material rudders. In order to compare the rudder performances of these two types, a sea trial test was carried out to investigate the speed performance, fuel consumption, and ship's turning ability. The results showed that the sea trial performance of the FRP composite rudder was better than that of the steel rudder type in terms of the sea speed, fuel consumption rate, and turning ability.

• Journal of Ship and Ocean Technology
• /
• 제5권4호
• /
• pp.44-50
• /
• 2001

Large container carriers are suffering from lack of knowledge on reliable correlation allowances between model tests and full-scale trials, especially at fully loaded condition, Careful full-scale sea trial with a full loading of containers both in holds and on decks was carried out to clarify it. Model test results were analyzed by different methods but with the same measuring data to figure out appropriated correlations factors for each analysis methods, Even if it is no doubt that model test technique is one of the most reliable tool to predict full scale powering performance, its assumptions and simplifications which have been applied on the course of data manipulation and analysis need a feedback from sea trial data for a fine tuning, so called correlation factor. It can be stated that the best correlation allowances at fully loaded condition for both 2-dimensional and 3-dimensional analysis methods are fecund through the careful sea trial results and relevant study on the large size container carriers.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권3호
• /
• pp.208-215
• /
• 2011

A full-scale field trial in ice-covered sea is one of the most important tasks in the design of icebreaking ships. The first Korean icebreaking research vessel 'ARAON', after her delivery in late 2009, had a sea ice field trial in the Arctic Sea during July-August, 2010. This paper describes the test procedures and data analysis on the icebreaking performance of the IBRV ARAON. The data gathered from the icebreaking performance test in the Chukchi Sea and the Beaufort Sea during the Arctic voyage of ARAON includes the speed and engine power of the ship as well as sea ice thickness and strength data. The air temperature, wind speed and heading of the ship were also measured during each sea ice trial. The ARAON was designed to break 1 m thick level ice with a flexural strength of 630kPa at a continuous speed of 3knots. She is registered as a KR POLAR 10 class ship. The principal dimensions of ARAON are 110 m, 19 m and 6.8 m in length, breadth and draft respectively. She is equipped with four 3,500kW diesel-electric main engines and two Azipod type propulsion motors. Four sea ice trials were carried out to understand the relationship between the engine power and the ship speed, given the Arctic ice condition. The analysis shows that the ARAON was able to operate at 1.5knots in a 2.5m thick medium ice floe condition with the engine power of 5MW, and the speed reached 3.1 knots at the same ice floe condition when the power increased to 6.6MW. She showed a good performance of speed in medium ice floe compared to the speed performance in level ice. More detailed analysis is summarized in this paper.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.8-14
• /
• 2011

RIB(Rigid Inflatable Boat) is widely used for coastal transportation in the commercial use and for ISR(Intelligence, Surveillance, Reconnaissance) in the military use. Since RIB is around 10 meters in length and over 30 knots in speed, its motion characteristics in waves is quite different from a large scale ship. When it turns, large roll occurs and heeling direction is opposite to the large ship's case. Currently, many countries are developing USV(Unmanned Surface Vehicle) of which type is RIB. In order to develop high performance autopilot and way point controller, it is very important to identify RIB's motion characteristics. In this paper, sea trial test results of a 7-meter RIB such as speed, turning, zig-zag, and way point control tests were represented and its resistance and propulsion model was identified by using sea trial data and Savitsky's formula. In addition, the state space model which will be used in the identification of the four-degree-of-freedom dynamics in the next step was formulated and the identification procedure was proposed.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.117-127
• /
• 2019

Vessel's ice speed performances will be verified in ice sea trial but environmental conditions of ice fields are changeable according to the weather condition of ice trial area. Speed performance has to correct in the no wind, wave and current etc. after sea trial. Especially finding ice fields which is exact the same as owner's ice thickness and strength requirements is not easy. Therefore speed correction according to environment condition has to be done after sea trial measurements. Correction methods for ice thickness, ice strength, wave, wind and ship draft, trim, ice drift etc. are checked in ice sea trial based on literature review such as ISO standard, ITTC recommendation, journal papers and proceedings of conferences. Possibility of application for current and ice drift correction in ice field are discussed and measuring schemes and procedures of correction methods are described in this paper. All of correction schemes are calculated for 'Araon' which is ice breaking research vessel with Arctic and Antarctic ice field test results. Analyzed results shows that Araon is satisfied with her official ice speed performance of 3 knots with 10MW power at 1m ice thickness, 570kPa ice flexural strength.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.438-441
• /
• 2004

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MD-ARS) might be one candidate of several systems against the ship's rolling. In this paper, a sea-trial test on a pendulum-type MD-ARS passively operated is carried out in Suyoung, Busan. After the system is installed on the cabin of the small leisure boat, a series of test is conducted before and after operating the system. Through the test, it is confirmed that the roll rate of the ship is pretty well reduced by the system.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.421-425
• /
• 2011

To know the speed performance of "ARAON" in Arctic ice field, the measurement of ice properties which is ice thickness & strength, snow depth and free board were performed on July 2010. The measuring method of nautical signals such as heading angle, power of engine, wind & current information etc. was described in this paper. The speed sea trials in ice were performed on the four different positions with different ice properties and engine powers because the uniform level ice is not detected in the Chukchi Sea. The test field was partially constrained ice floe with hummocks and it was superposed with small broken ice pieces each other. All of the measured ice properties were compared and evaluated according to the results of sea trial. The relations between speed, ice thickness, strength and power were summarized. Consequently according to the sea trial results, the speed of ARAON is 2.78knots at the 2.49m ice thickness with 6.55MW engine power.

• 해양환경안전학회지
• /
• 제20권5호
• /
• pp.552-557
• /
• 2014

본 연구의 목적은 1인승 보트를 설계 제작하여 시운전 및 전산유체역학(CFD)를 이용하여 속도성능을 분석하는 것이다. 선형설계를 포함한 보트의 전반적인 설계과정을 설명하였고, 설계를 바탕으로 제작된 보트에 대하여 잠잠한 해상에서 시운전을 수행했다. 시운전을 통해 보트의 설계속도에서 제동마력은 1680 W가 계측하였다. 유동해석은 상용 CFD 코드인 STAR-CCM+를 이용하여 자유수면과 동적트림을 고려하여 수행되었다. 유동해석 결과 잉여저항 성분이 마찰저항 성분에 비해 크게 나타나는 것을 확인할 수 있었다. 시운전과 CFD 결과를 바탕으로 보트의 전체효율계수를 추정하였다. 전체효율계수는 전달효율과 준 추진효율로 나누었다. 준 추진효율은 동일 프로펠러를 사용하는 솔라보트의 속도성능 추정 시 사용될 수 있다. 연구결과은 향후 개발될 보트의 선형설계, 성능분석 및 개발에 정보를 제공할 수 있다.

• 대한조선학회논문집
• /
• 제38권3호
• /
• pp.54-61
• /
• 2001

최근 ISO에서는 속도 시운전의 결과를 보정하는 방법과 시운전 방법 자체를 표준화하는 움직임을 보이고 있다. 그 주요내용 중에 하나는 과학적이고, 신뢰성 있는 시운전 계측이다. 이러한 흐름에 대비하여 저자는 1996년 각종 항해 신호 집중화 장비의 개발을 완료하였고, 1998년 DGPS를 이용한 속도, 조종 시운전의 계측 및 해석 program의 개발을 완료하였다. 개발된 계측 및 해석 program은 검증을 거쳐 1999년 한국 선급으로부터 Certification을 받아 실선 적용을 시작하였다. 현재까지 70여 척의 시운전을 본 시스템을 통해 수행하였다. 그러나 기존에 개발된 시스템은 단축선에 대해서만 적용이 가능하다는 제약이 있었다. 이를 극복하고자 저자는 단축선 이외에 다축선에 대해서도 적용할 수 있는 보완된 계측 시스템과 해석 program을 개발하였다. 본 논문에서는 두 시스템에 대한 개략적인 소개, 검증 방법, 실선 시운전 계측 및 해석 결과 등에 대해서 소개하고자 한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.474-481
• /
• 2019

The speed trial of a ship is one of the important elements guaranteeing its performance under the contract between the ship owner and shipbuilding company. A speed trial at sea, where the tidal current and waves are suppressed to the maximum, can prevent measurement errors due to external force conditions. On the other hand, it is difficult to maintain a calm sea state in most sea areas determined by the influence of the tidal current, wave, wind, etc. Therefore, this study evaluated a method of simulating a tidal current, which is one of the external force conditions, at the speed test operation of a ship, and applied the simulation result to the plan of a speed trial.