• New & Renewable Energy
• /
• v.3 no.4
• /
• pp.54-62
• /
• 2007

In this paper, we report the research highlight on the preparation and characterization of Indium-free $Cu_2ZnSnSe_4$ and Indium-reduced $CulnZnSe_2$ thin films in order to seek the viability of these absorber materials to be applied in thin film solar cells. The films of $Cu_2ZnSnSe_4\;and\;CulnZnSe_2$ were prepared using mixed binary chalcogenides powders. It was observed that Cu concentration was a function of substrate temperature as well as CuSe mole ratio in the target. Under an optimized condition, $Cu_2ZnSnSe_4\;and\;CulnZnSe_2$ thin films grew with strong [112]. [220/204] and [312/116] reflections. Both $Cu_2ZnSnSe_4\;and\;CulnZnSe_2$ films were found to exhibit a high absorption coefficient of $104^4cm^{-1}\;Cu_2ZnSnSe_4$ film showed a band gap of 1.5eV which closes to the optimum band gap of an ideal solar absorber for a solar cell. On the other side, an increase of optical band gap from 1.0 to 1.25eV was found to be proportional with an increase of Zn concentration in the $CulnZnSe_2$ film. All films in this study revealed a p-type semiconductor characteristic.

• Journal of the Korean Vacuum Society
• /
• v.16 no.1
• /
• pp.40-45
• /
• 2007

ZnCdSe alloy semiconductor was widely used for the optoelectronic device. And CdSe is the end-point in this material. In this work, we measured the dielectric function spectrum of cubic CdSe with Vacuum Ultra Violet spectroscopic ellipsometry and analysed this data with parametric model. As a result, we observed some of transition energy point over 6 eV and obtained the database for dielectric function spectrum, which could be used for temperature or alloy composition dependence study on optical property of CdSe.

• Journal of Powder Materials
• /
• v.15 no.3
• /
• pp.210-213
• /
• 2008

Elongated CdSe nanoparticles with a diameter of 3-7nm have been successfully synthesized using two surfactants of trioctylphospine (TOP) and hexadecylamine (HDA) at $160^{\circ}C$. The formation of elongated CdSe nanoparticles is possibly due to the cooperative effects from both the different binding capability of two surfactants (TOP and HDA) and intrinsically anisotropic crystal structure of the CdSe. The electron diffraction pattern of CdSe nanoparticles revealed the formation of wurzite phase. The CdSe samples showed red-shifted wavelength from 560 to 580nm with increasing the refluxing time due to the gradual growth of CdSe nanoparticles. The relatively broad absorption band can be attributed to the surface state of CdSe nanoparticles. The possible formation mechanism of elongated CdSe nanoparticles was proposed and the characteristics of CdSe have been discussed as well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.100-101
• /
• 2008

To obtain the single crystal thin films, $CuGaSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $450^{\circ}C$, respectively. After the as-grown $CuGaSe_2$ single crystal thin films was annealed in Cu-, Se-, and Ga-atmospheres, the origin of point defects of $CuGaSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{CU}$, $V_{Se}$, $Cu_{int}$, and $Se_{int}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Cu-atmosphere converted $CuGaSe_2$ single crystal thin films to an optical n-type. Also, we confirmed that Ga in $CuGaSe_2$/GaAs did not form the native defects because Ga in $CuGaSe_2$ single crystal thin films existed in the form of stable bonds.

• Journal of the Korean Vacuum Society
• /
• v.2 no.1
• /
• pp.78-84
• /
• 1993

Hot-Wall Epitaxy(HWE) 방법으로 ZnSe/ZnSe(bulk) 박막을 성장하였다. 이 때 사용되어진 ZnSe 기판은 승화법으로 증발부분의 온도를 $1160^{\circ}C$ 성장부분의 온도를 $1130^{\circ}C$로 하여 약 2주 동안 직경 20mm, 높이 18mm인 원추형의 ZnSe 단결정을 얻었다. 양질의 ZnSe 박막을 얻기 위한 조건은 증발부분의 온도는 $610^{\circ}C$, 기판의 온도는 49$0^{\circ}C$이었다. ZnSe(bulk) 기판위에 성장한 ZnSe 박막의 광발광에서는 강한 D-A pair emission과 Cu 불순물에 의한 녹색과 적색 발광이 관측되었고 SA 발광은 관측되지 않았다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.464-467
• /
• 1999

The undoped-InSe and Sn-doped InSe single crystals were grown by vertical Bridgman method and their properties were invesigated. The orientations and the crystallinites of these crystals were identified by X-ray diffraction(XRD), double crystal rocking curve(DCRC) and etch-pit density(EPD) measurements. From the Raman spectrum at room temperature, TO, LO modes and together with their overtones and combinations were observed. Optical properties were inves ated by PL at 12K and direct band gap of these crystals obtained from optical absorption spectrum. Compared with undo&-InSe, electrical properties of Sn-doped InSe were increased and the electrical conductivity type were n-type. But electrical properties along growth direction of crystals and radial direction of wafer showed nearly uniform distribution. The Zn diffusion mechanism in InSe could be explained by interstitial-substitutional and vacancy complex models and the activation energy of 1.15-3.01eV were needed for diffusion.fusion.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2430-2441
• /
• 2018

Selenium (Se)-rich binary Cu-Se and In-Se nanoparticles (NPs) were synthesized by a modified heat-up method at low temperature ($110^{\circ}C$) using the gum exudates from a cherry blossom tree. Coating of CISe absorber layer was carried out using Se-rich binary Cu-Se and In-Se NPs ink without the use of any external binder. Our results indicated that the gum used in the synthesis played beneficial roles such as reducing and capping agent. In addition, the gum also served as a natural binder in the coating of CISe absorber layer. The CISe absorber layer was integrated into the solar cell, which showed a power conversion efficiency (PCE) of 0.37%. The possible reasons for low PCE of the present solar cells and the steps needed for further improvement of PCE were discussed. Although the obtained PCE is low, the present strategy opens a new path for the fabrication of eco-friendly CISe NPs solar cell by a relatively chief non-vacuum method.

• Current Photovoltaic Research
• /
• v.8 no.3
• /
• pp.102-106
• /
• 2020

In this paper, the effect of MoSe₂ on the contact resistance (R_C) of the transparent conducting oxide (TCO) and Mo junction in the scribed P2 region of the Cu(In,Ga)Se₂ (CIGS) solar module was analyzed. The CIGS/Mo junction becomes ohmic-contact by MoSe₂, so the formation of the MoSe₂ layer is essential. However, the CIGS solar module has a TCO/MoSe₂/Mo junction in the P2 region due to structural differences from the cell. The contact resistance (R_C) of the P2 region was calculated using the transmission line method, and MoSe₂ was confirmed to increase R_C of the TCO/Mo junction. B doped ZnO (BZO) was used as TCO, and when BZO/MoSe₂ junction was formed, conduction band offset (CBO) of 0.6 eV was generated due to the difference in their electron affinities. It is expected that this CBO acts as a carrier transport barrier that disturbs the flow of current, resulting in increased R_C. In order to reduce the R_C caused by CBO, MoSe₂ must be made thin in a CIGS solar module.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.596-600
• /
• 2009

Electrochemical deposition characteristics of CdSe nanorods were investigated for hybrid solar cell applications. CdSe nanorods were fabricated by electrochemical method in $CdSO_4$ and $H_2SeO_3$ dissolved aqueous solution using an anodic aluminum oxide (AAO) template. Uniformity of CdSe nanorods was dependent on the diameter and the height of holes in AAO. The current density, current mode, bath composition and temperature were controlled to obtain a 1:1 atomic composition of CdSe. CdSe nanorods deposited by direct-current method showed better uniformity compared to those deposited by purse-current and/or purse-reverse current methods due to the bottom-up filling characteristics. $H_2SeO_3$ concentration showed more significant effects on pH of solution and stoichiometry of deposits compared to that of $CdSO_4$. A 1:1 stoichiometry of uniform CdSe nanorods was obtained from 0.25M $CdSO_4-5$ mM $H_2SeO_3$ electrolytes with a direct current of 10 $mA/cm^2$ at room temperature. X-ray diffraction and electron diffraction pattern investigations demonstrate that CdSe nanorods are a uniform cubic CdSe crystal.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.161-166
• /
• 1998

To study the usefulness of Se301 cells, which is originated from Spodoptera exigua and has susceptibility to the Autographa californica NPV (AcNPV), as a host for the AcNPV-based expression vector system, we compared the characteristics of AcNPV in Se301 and Sf-21 cells. The symptom by viral infection was similar in both of cells, but the ratio of polyhedra released from the cell was higher in Se301 cells than in Sf-21 cells. The overall PIB productivity of AcNPV was similar in both cells but the size of polyhedra was larger in Se301 cells. While the polyhedrin expression efficiency was about 2.4 times higher in Se301 cells than in Sf-21 cells, the viral growth was higher in Sf-21 cells. These results suggested that Se301 cell is very useful in the AcNPV-based expression system as a host.