• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2012년도 춘계학술대회
• /
• pp.61-62
• /
• 2012

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.174-178
• /
• 1999

최근에 컴퓨터 비젼은 자동화 분야에서 많이 응용되고 있다 특별히 본 논문은 컴퓨터 비젼을 이용한 해상교통검지기 시스템에 대하여 서술한다. 비교적 높은 수준의 정보로서 배의 속력, 대기 길이 및 시간, 배의 크기 및 종류 둥이 있다. 배의 속도를 측정하기 위하여 두 개의 인식 선이 모니터상의 정해진 위치에 설치된다. 속도는 배가 두 인식 선을 지나는데 소요되는 시간과 두 인식 선의 거리를 이용하여 계산된다. 또한 대기길이와 시간은 선박의 화면상의 화면 좌표를 이용하여 계산된다. 그리고 마지막으로 배의 크기 및 종류는 카메라 캘리브레이센 데이터 및 미리 내장된 선박의 데이터베이스를 이용하여 계산된다. 본 시스템은 해상 교통사고를 줄이는데 기여할 것이다. 더군다나 획득된 영역 정보를 이용하여 더 많은 유용한 정보를 얻을 수 있다.

• 제어로봇시스템학회논문지
• /
• 제17권10호
• /
• pp.989-994
• /
• 2011

This study aims to demonstrate the feasibility of a visual servoing-based paired structured light (SL) robot for estimating structural displacement under various external loads. The former paired SL robot, which was proposed in the previous study, was composed of two screens facing with each other, each with one or two lasers and a camera. It was found that the paired SL robot could estimate the translational and rotational displacement each in 3-DOF with high accuracy and low cost. However, the measurable range is fairly limited due to the limited screen size. In this paper, therefore, a visual servoing-based 2-DOF manipulator which controls the pose of lasers is introduced. By controlling the positions of the projected laser points to be on the screen, the proposed robot can estimate the displacement regardless of the screen size. We performed various simulations and experimental tests to verify the performance of the newly proposed robot. The results show that the proposed system overcomes the range limitation of the former system and it can be utilized to accurately estimate the structural displacement.

• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.724-727
• /
• 2009

We have fabricated (Ba,Sr)TiO3$TiO_3$ thick films doped with various amount of ZnBO dopants (1, 3, and 5 wt%) by screen printing method on the alumina substrates, which were sintered at the temperature below $1200^{\circ}C$. With increasing the amount of ZnBO dopants, the relative dielectric permittivity of ZnBO doped (Ba,Sr)$TiO_3$ was decreased, while loss tangent was increased. 1 wt% ZnBO doped (Ba,Sr)$TiO_3$ thick film has relative dielectric permittivity of 759 at 1 MHz, while 3 and 5 wt% of ZnBO doped (Ba,Sr)$TiO_3$ thick films have 624 and 554, respectively. By introducing ZnBO dopants to the (Ba,Sr)$TiO_3$ thick films, leakage current densities were decreased. The decreased leakage current with increasing ZnBO dopants can be explained by increased density and grain size of thick film on alumina substrate. We believe this decreased leakage current density probably come from the increased grain size and increased density.

• 산경연구논집
• /
• 제15권3호
• /
• pp.11-20
• /
• 2024

Purpose: This study focuses on the Chinese smartphone market to estimate product attributes influencing Chinese customers' preference for developing new smartphones through conjoint analysis. Research design, data and methodology: The online questionnaire survey is processed among Chinese potential smartphone customers. Conjoint analysis including traditional conjoint analysis (TCA) and choice-based conjoint analysis (CBCA), is used to analyze the useful data of 500. Results: Results indicate that price is the most important predictor while screen size is the least for Chinese customers' preference whether the method is TCA or CBCA. However, the importance of brand, capacity, CPU, and screen design is different. Moreover, based on each smartphone attribute level's utility, the new products with the best combinations are different compared with both methods. Finally, the predicted market shares of the top 3 products are the same with maximum utility rule model between TCA and CBCA. However, when considering with the new best combined product, they are significantly different. Conclusions: Managers should recognize the differences between TCA and CBCA and select the best method to develop new smartphones for sustainable business in the Chinese competitive market based on the important attributes of price, brand, capacity, CPU, screen design, and size.

• 산업융합연구
• /
• 제18권6호
• /
• pp.33-39
• /
• 2020

멀티스크린 영상시스템은 하나의 스크린에 상영되는 영상을 용도에 맞게 여러 화면으로 구성하여 상영할 수 있다. 관객들은 특별한 장치 없이 폭 넓은 실감 영상을 감상할 수 있어 강한 몰입감을 얻을 수 있다. 최근 멀티스크린을 이용한 실감 영상은 Screen X나 Escape와 같은 멀티 프로젝션 기술을 바탕으로 스토리와 정보 전달이 가능한 영화로 제작되고 있다. 또한, 디스플레이의 크기는 점점 대형화 추세이고 화질도 고해상도로 향상되고 있어 HD나 UHD급 디스플레이 여러대를 입체적으로 구성한 디지털 사이니지 형태로 발전을 가속하고 있으나 촬영된 영상을 사용하는 데는 화질열화로 인해 한계가 있다. 이번 연구는 1950년부터 현재까지 멀티스크린 영상의 발전사와 기술적 분석, 제작 방법에 대해 분석하고 멀티스크린을 이용한 영상 콘텐츠 상영 시 발생되는 화질 열화 최소화 방법에 대해 연구한다. 연구 결과를 바탕으로 촬영된 실사 영상은 디지털 사이니지와 같은 고해상도 영상 상영이 가능한 플랫폼에서 실감영상 구현이 가능할 것이라 기대한다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권1호
• /
• pp.21-29
• /
• 2004

This paper is to study the heat transfer performance of the copper-water heat pipe with screen wicks. Recently, the semiconductor capacity of an electronic unit becomes larger, but its size becomes much smaller. As a result, a high- performance cooling system is needed. Experimental variables are inclination angles, temperatures of cooling waters and the mesh number of screen wicks. The distilled water was used as a working fluid. Based on the experimental results, when the copper-water heat pipe of 6mm diameter is used at the top heat mode, the heat transfer performance of 100 mesh 2 layers heat pipe is better than that of 150 and 200 mesh. The thermal resistance of the two layers with the 100-mesh screen was 0.7-$0.8^{\circ}C$/W.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.834-848
• /
• 2013

To effectively use these functions many kinds of human-phone interface are used such as touch, voice, and gesture. However, the most important touch interface cannot be used in case of hand disabled person or busy both hands. Although eye tracking is a superb human-computer interface method, it has not been applied to smartphones because of the small screen size, the frequently changing geometric position between the user's face and phone screen, and the low resolution of the frontal cameras. In this paper, a new eye tracking method is proposed to act as a smartphone user interface. To maximize eye image resolution, a zoom lens and three infrared LEDs are adopted. Our proposed method has following novelties. Firstly, appropriate camera specification and image resolution are analyzed in order to smartphone based gaze tracking method. Secondly, facial movement is allowable in case of one eye region is included in image. Thirdly, the proposed method can be operated in case of both landscape and portrait screen modes. Fourthly, only two LED reflective positions are used in order to calculate gaze position on the basis of 2D geometric relation between reflective rectangle and screen. Fifthly, a prototype mock-up design module is made in order to confirm feasibility for applying to actual smart-phone. Experimental results showed that the gaze estimation error was about 31 pixels at a screen resolution of $480{\times}800$ and the average hit ratio of a $5{\times}4$ icon grid was 94.6%.

• 한국재료학회지
• /
• 제28권12호
• /
• pp.714-718
• /
• 2018

Anti-reflection thin films are fabricated on glass substrates using the screen printing method. Tetra ethyl silicate(TEOS) and methyl tri methoxy silane(MTMS) are used as starting materials and buthyl carbitol acetate(BCA) and buthyl cellusolve(BC) are mixed to improve the viscosity of the solution. Anti-reflection thin films are fabricated according to the number of the screen mesh and the characteristics improve as the mesh size increases. The transmittance and reflectance of the coated thin film using 325 mesh are about 94 % and 0.43 % in the visible wavelength. The thickness and refractive index of the AR thin film are 107 nm and n = 1.26, respectively.

• 수산해양교육연구
• /
• 제17권1호
• /
• pp.67-75
• /
• 2005

Mobile devices compared with personal computers on the desktop have low bandwidths, small screens, and relatively slow speeds. These systems have practical problems with information searches in a web environment. Information searching of various web contents on the small size screen has especially severe limitations. We propose a filtering technique of web contents which can overcome the limitations of small size screens and meet the user requirements in a PDA environment. For these constructions, we first divide the screen into segment blocks and then extract content blocks according to the user requirements, so that only filtered web contents will be shown. The performance evaluation of the proposed technique saves an average time of about 30% by displaying only the extracted information instead of the whole web page.