• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.629-632
• /
• 2008

Printed organic thin-film transistors (OTFTs) were used in the fabrication of a screen- printed gate, source and drain electrodes on flexible plastic substrates using silver pastes, a coated polyvinylphenol dielectrics, and jetted bis(triisopropyl-silylethynyl) pentacene (TIPS-pentacene) organic semiconductor. The OTFTs printed using screen printing and soluble processes made it was possible to fabricate a printed OTFT with a channel length as small as $13\;{\mu}m$ on plastic substrates; this was not possible using previous traditional printing techniques.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.2
• /
• pp.19-30
• /
• 2002

Four screen mesh counts of 100, 150, 200, and 305 threads per inch are chosen and a designed test figure is exposed on them for printing experiment to measure the ink deposit thickness. Among a number of variables, the ink viscosity, the screen gap and the squeegee pressure and speed are estimated with their effected thickness. These variables affect as much as around 50% compared with the theoretical ink volume listed by the mesh manufacturer and each variable has different influence on the thickness. The data and graphs have been analyzed for the thick film production.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.2
• /
• pp.303-311
• /
• 2004

The purposes of this study were to investigate characteristic changes on nonwoven fabric by the charcoal printing. It separate grind charcoal as two different size of particles 45-52${\mu}{\textrm}{m}$ and 53-65${\mu}{\textrm}{m}$ for hand screen printing on three kind of nonwoven fabrics. To examine the effect of charcoal printing on nonwoven fabric were to obselve surface changes by a scanning electron microscope, dyeability by using spectrophotometer, moisture regain by oven method, air permeability, anion property, deodoriration and antibacterial activity. The results were as follows： When charcoal powder concentration increased from 3 to 9％, K/S value also increased from 3.06 to 8.55. When charcoal concentration increased, moisture regain also increased. In same concentration, moisture regain occurred higher as particle of small size. Air permeability decreased when the charcoal printing concentration increased. Anion occurrence appeared 140-160ion/cc from three different kinds of nonwoven fabrics in 3％ and 9％ charcoal concentration. Therefore, occurred anion ineffectively. In concentration of 3％, rate of deodorization measured as 89％, 83％ and 87％, and 9％ concentration caused 96％, 86％ and 93％ of high deodorization. Antibacterial activity examination in nonfinished nonwoven fabric resulted range of 60％, however, 3％ and 9％ concentration finished nonwoven fabric resulted 99.9％ of excellent antibacterial activity.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.100-101
• /
• 2007

Polymer thick film capacitors were successfully fabricated by using ink-jet printing and screen printing technology. First, a bottom electrode was patterned by ink-jet printing of a nano-sized silver ink. Next, a dielectric layer was formed by the screen printing, then a top electrode was pattern by ink-jet printing of a nano-sized silver ink. The printed area of the dielectric layers were changed into $2{\times}2m^2$and $4{\times}2m^2$, and also the area of the electrodes were patterned with $1{\times}1mm^2$ and $1{\times}3mm^2$. The thickness of the printed dielectric layer was ranged from 1.1 to $1.4{\mu}m$. The analysis of capacitances verified that the capacitances was proportional to the area of the printed electrode. The capacitances of the fabricated capacitors resulted in one third of the calculated capacitances.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.95-97
• /
• 2008

In this study eco-friendly wax remover for printing table of flat screen was investigated. Seven organic solvents, diethylene glycol monomethyl ester, triethylene glycol monomethyl ester, triethylene glycol monobutyl ester, tripropylene glycol monomethyl ester, dimethyl sulfoxide(DMSO), trichloro ethylene(TCE), tolune, were used as resin wax remover. The resin wax solubility with solvents was investigated. DMSO was found to be the most suitable eco-friendly resin wax remover.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.65-70
• /
• 1998

Fine powders of $\alpha$-Fe2O3 were prepared by precipitation method using iron (III) nitrate in ethanol solvent and the thick film using this powder was made by the screen printing technology. Effects of the reaction temperature and concentration of the iron (III) nitrate on the particle size and specific surface area were studied. Also, the relationship between the powder size and properties of the thick film was discussed.

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.99-99
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.265-266
• /
• 2008

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.05a
• /
• pp.99-99
• /
• 2002

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.21.2-21.2
• /
• 2007