• Ocean and Polar Research
• /
• v.42 no.1
• /
• pp.63-76
• /
• 2020

This study sought to assess the stock status and analyze the management effects with regard to the Black scraper, which is one of the more commercially important species in Korea. The catch amounts of Black scraper have significantly decreased since 1991. In this analysis, a Bayesian state-space model was utilized to assess the biomass of the Black scraper given the limited data. Model results showed that MSY and B_MSY of Black scraper were estimated to be 26,587 tons and 365,200 tons, respectively. In addition, the current biomass level of the Black scraper was assessed to be only 2.1% (7,549 tons) of B_MSY. For this reason, the effects of a moratorium policy on the Black scraper were evaluated. The results showed that if such a moratorium policy was implemented, it would take at least 18-40 years to restore the biomass level of the Black scraper to B_MSY depending upon its growth rates.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.658-668
• /
• 2009

Earth-moving operation has a great impact on the overall budget and schedule of any heavy civil projects. More often than not, the operational decisions are made largely based on field personnel's experience and judgment. In particular, decisions on earth moving operations by scraper-dozer fleets have been heavily influenced by the following belief: "The longer a dozer pushes a scraper for loading, the better earth-moving productivity is gained by the fleet." Even though there is some truth to this notion, scraper-dozer earth moving operations involve a much complex process that requires a systematic analysis for predicting the maximum production. To this end, this paper presents a spreadsheet-based scraper-dozer fleet operation model for its production optimization. Various optimization techniques, including a genetic-algorithm method, are presented for comparison and each technique's pros and cons are discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.895-902
• /
• 1999

This paper deals with a numerical study of the tribological contact stress distributions of elastomeric lip seals for oscillating shafts when the sealing interference and band width between the lip ease or contact seals and the shaft are present. Using the finite element method the contact stress and band width of scraper seals are analyzed for the sealing interference including some nonlinearities such as geometrical nonlinearity, material nonlinearity and nonlinear contact boundary condition. The FEM results showed that the contact stress concentrated on the contacting lip zone between the contacting edge of lip and the shaft for the increased interference. In double lip scraper seals, ole maximum contact stress of the dust lip, which is used to exclude foreign contaminants is six times higher than that of the primary sealing lip, which is used to contain lubricants.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.198-203
• /
• 1997

This paper deals with a numerical study of the tribological contact stress distributions of elastomeric lip seah for oscillating shafts when the sealing interference and band width between the lip edge of contact seals the shaft are present. Using the finite element method, the contact stress and band width of scraper seals rare analyzed for the sealing interference including some nonlinearities such as geometrical nonlinearity, material nonlinearity and nonlinear contact boundary condition. The FEM results showed that the contact stress concentrated on the contacting lip zone between the contacting edge of lip and the shaft for the increased interference. In double lip scraper seals, the maximum contact stress of the dust lip, which is used to exclude foreign contaminants, is six times higher than that of the primary sealing lip, which is used to contain lubricants.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.689-698
• /
• 2019

In tunnel excavation by TBMs, a cutterhead, which practically excavates the ground, is an important part directly affecting net penetration rate. Most of the researches on the cutterhead design that have been carried out until now are on the cutter arrangement. It is difficult to find a study for the effect of the scraper installation direction on TBM excavation although same cutterheads except for direction of the scraper are used in Korea. Therefore, this paper shows how the direction of scraper installation affects shield-TBM excavation. Discrete element method was used to identify the effect of scraper installation direction on shield-TBM excavation. When the scraper installation direction was outward, the amount of particles per unit time flowed into the cutter head opening was smaller than when the scraper installation direction was inward, and more loads were applied to the cutterhead.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.144-149
• /
• 2006

In this study ice making characteristics are experimentally investigated for the ice slurry generating system which is pneumatically operated. The experimentations are conducted under the various test conditions such as chilled water inlet temperature, aqueous solution concentration, flow rate of cooling water, scraper pitch and frequency of cylinder stroke. For the above experimental conditions, ice making characteristics of the slurry ice generating system are evaluated in terms of the overall heat transfer coefficient, heat transfer rate and the amount of slurry ice generation. And the experimental results show that the heat transfer rate of the system increases as the flow rate of cooling water solution increases and the concentration of ethylene glycol and inlet temperature of chilled water decreases.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1996.05a
• /
• pp.38-39
• /
• 1996

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.89-95
• /
• 2018

The maturation and spawning of black scraper, Thamnaconus modestus were studied using samples collected monthly from March, 2015 to February, 2016 in the coastal waters off Middle East Sea, Korea. The gonadosomatic index (GSI) of female was the highest in June. The spawning periods lasted from March to September based on histological observation of female gonad development. The percentage of sexually mature females estimated from a logistic function was over 50% for the size group 18.02 cm (total length, TL). The size of eggs spawned was between 0.40 to 0.58 mm. Fecundity varied between 185,648 and 9,747,250 eggs. The relationship between the fecundity and TL of the fish was expressed in the fecundity equation as $F=0.0297TL^{5.4835}$.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.107-110
• /
• 1997

We generated a diffraction free beam from Nd:YAG laser with an NBUR (negative branch unstable ring) resonator. The field inside the resonator had a plane wavefront and a homogeneous intensity distribution and the output beam through a scraper mirror of an annular type was used as a source. The outpur beam had an inner radius of 2.5 mm and an outer radius of 5 mm. In this experiment, we used a Fourier transformation lens with the focal length of 5 m to observe the far-field pattern. The lens was placed at a distance of the focal length from the scraper mirror and we found that the beam did not show any noticable diffraction over the distance of 13 m from the lens.

• Journal of Korean Society on Water Environment
• /
• v.18 no.4
• /
• pp.435-440
• /
• 2002

A pilot scale SBR (effective volume, $20m^3$) for the treatment of piggery wastewater treatment was performed with three different kinds of wastewater; fermenter effluent, scraper type and slurry type. The react phase in SBR was performed by sub-cycle operation consisting of repeated short cycle of anoxic-aerobic step. The fermenter effluent was characterized by the rapid nitrification and $NO_X-N$ accumulation due to depletion of organic matter in wastewater. The scraper type wastewater showed appropriate nitrogen removal efficiency, however, a poor response capacity for high loading rate often resulted in increased nitrogen concentration in effluent. Moreover, severe P release was the most serious problem in scraper type wastewater. SBR treated slurry type wastewater with high nitrogen removal efficiency to satisfy effluent quality requirement. It was thought that high concentration of organic matter in slurry made it possible to uptake P during SBR operation, where P concentration of 140mgP/l was decreased to 8mgP/l. As results, SBR was suitable to treat slurry type wastewater which has been discharged to the ocean till now.