• Tuberculosis and Respiratory Diseases
• /
• v.77 no.1
• /
• pp.18-23
• /
• 2014

Background: Combined pulmonary fibrosis and emphysema (CPFE) have different pulmonary function tests (PFTs) and outcomes than idiopathic pulmonary fibrosis (IPF). The intention of this study was to identify unknown differences between CPFE and IPF by a retrospective comparison of clinical data including baseline and annual changes in pulmonary function, comorbidities, laboratory findings, clinical characteristics and cause of hospitalization. Methods: This study retrospectively enrolled patients with CPFE and IPF who had undergone PFTs once or several times per year during a follow-up period of three years. Baseline clinical characteristics and the annual changes in the pulmonary function during the follow-up period were compared between 26 with CPFE and 42 patients with IPF. Results: The baseline ratio of forced expiratory volume in one second to forced vital capacity ($FEV_1$/FVC%) in patients with CPFE was lower than that in patients with IPF ($78.6{\pm}1.7$ vs. $82.9{\pm}1.1$, p=0.041). The annual decrease in $FEV_1$/FVC in the CPFE was significantly higher than in the IPF. The annual decreases in diffusion capacity of carbon monoxide and FVC showed no significant differences between the two groups. The symptom durations of cough and sputum were in the CPFE significantly lower than in the IPF. The serum erythrocyte sedimentation rate level at the acute stage was significantly higher than in the IPF. There were no significant differences in the hospitalization rate and pneumonia was the most common cause of hospitalization in both study groups. Conclusion: The annual decrease of $FEV_1$/FVC was in patients with CPFE significantly higher than in the patients with IPF.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.365-372
• /
• 2017

Squat exercise is one of the important free weight exercises that can safely and effectively expect the athletic performance by establishing the rationale. Therefore, it is necessary to study the side effects caused by incorrect exercise, scientific countermeasures and to develop a exercise estimation model. It is effective and accurate to use a variety of assistive devices to calibrate athletic posture. The issues of the structural analysis for designing a foot plate for squat exercise is to model the behavior by the dynamic behavior. It should be consider that the center of gravity of each segmented body is different when the maximum load is applied. It is applied to complete system design through simulation method with kinematic dynamic, ground reaction force and load analysis for the free weight exercise equipment, VR device, and safety foot plate. In this paper, the authors propose the design method for the vertical load distribution applied in the design of the foot plate used for the squat exercise mechanism, and based on these results, design make the more safe and reliable free weight exercise equipment system.

• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.263-271
• /
• 2012

Purpose: The purpose of this research was to examine department satisfaction for improving the competitiveness of department of dental technology and providing basic data for students successful guidance. Methods: The study subject were 560 students from 4 colleges, and they were selected by the convenient sampling method. Data for this survey was obtain by self-administration method. This questionnaire consist of general characteristics, the awareness of before entering department of dental technology, the satisfaction of department of dental technology, an opinion about change of one's course and temporary absence. Results: About the time of selecting their major, 70.1% of students answered the most before highschool. Department of dental technology and the most common source of information in selecting a majors is the person oneself(52.6%). The person who answers because of knowing a little bit for the question asking the priori knowledge of department of dental technology showed up as 66.3%. About the motivation for selection their major, 37.4% of students answered the most it seemed to be a future prospect. As to the extend of department satisfaction, the satisfaction showed up as 63.3%, but the extend of satisfaction was exposed to reduce as the grade increased. The dissatisfaction factor is the difficulty of the theory(29.8%). Many students do not want to change their majors even if they are provided with the chance to do so(68.7%). From the survey related to the experience of thinking over temporary absence and drop out, 56.8% of students responded they had experienced thinking about that. Current feelings after department selection was found to be the most significant factor that affects satisfaction of department of dental technology(Adjusted $R^2$=48.3%). Conclusion: The extend of satisfaction of the women is low. The extend of satisfaction reduces as the grade increases. The school subject extend of satisfaction can know that ratio about of considering the leave of absence and voluntary withdrawal increases. Therefore, the plan of education that women can adapt the women o the school subject well and that it can be satisfied is sought for. It is considered that effort promoting the extend of satisfaction is needed as the grade increases.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.9
• /
• pp.1420-1429
• /
• 2020

Corynebacterium glutamicum, an important industrial strain, has a relatively slower reproduction rate. To acquire a growth-boosted C. glutamicum, a descendant strain was isolated from a continuous culture after 600 generations. The isolated descendant C. glutamicum, JH41 strain, was able to double 58% faster (t_d=1.15 h) than the parental type strain (PT, t_d=1.82 h). To understand the factors boosting reproduction, the transcriptomes of JH41 and PT strains were compared. The mRNAs involved in respiration and TCA cycle were upregulated. The intracellular ATP of the JH41 strain was 50% greater than the PT strain. The upregulation of NCgl1610 operon (a putative dyp-type heme peroxidase, a putative copper chaperone, and a putative copper importer) that presumed to role in the assembly and redox control of cytochrome c oxidase was found in the JH41 transcriptome. Plasmid-driven expression of the operon enabled the PT strain to double 19% faster (t_d=1.82 h) than its control (t_d=2.17 h) with 14% greater activity of cytochrome c oxidase and 27% greater intracellular ATP under the oxidative stress conditions. Upregulations of genes those might enhance translation fitness were also found in the JH41 transcriptome. Plasmid-driven expressions of NCgl0171 (encoding a cold-shock protein) and NCgl2435 (encoding a putative peptidyl-tRNA hydrolase) enabled the PT to double 22% and 32% faster than its control, respectively (empty vector: t_d=1.93 h, CspA: t_d=1.58 h, and Pth: t_d=1.44 h). Based on the results, the factors boosting growth rate in C. gluctamicum were further discussed in the viewpoints of cellular energy state, oxidative stress management, and translation.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.481-488
• /
• 2004

Solvent extraction of Ni(II) into a chloroform by using salen[N,N'-Bis (salicylidene)-ethylenediamine] as a ligand has been studied. Salen was synthesized from ethylenediamine and salicylaldehyde by simple condensation reaction in an ethanol. Salen formed a 1 : 1 complex with Ni(II) and its extraction constant was $10^{5.12}$. For the determination of Ni(II) in sea water samples, some experimental conditions such as pH of solution, amount of salen, acid type and concentration for back extraction, extraction time, and influence of foreign ions were optimized by using a synthetic sea water. The sea water of which the composition was similar to a natural sea water was synthesized in this laboratory. Trace Ni(II) was extracted into the chloroform in the weak basic solution above pH 8. And the nickel could be quantitatively extracted with the concentration of salen higher than $1.2{\times}10^{-4}mol/L$. This concentration was more than 180 times of Ni(II) in the solution with a mole ratio. Real samples of Korean coastal sea water were analyzed under optimized conditions. Even though Ni(II) was not detected in these samples. Recoveries more than 98% were obtained in the samples which 40 ng/mL of Ni(II) was spiked. And detection limit of proposed method was 1.3 ng/mL. From these results, it could be known that salen of this type would be applied for the determination of trace metals as an organic chelating reagent.

• Analytical Science and Technology
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2004

The synergistic solvent extraction of Mn(II) by N-nitroso-N-phenylhydroxylamineammonium salt (cupferron) and tetrabutylammonium ion ($TBA^+$) has been studied. In the presence of $TBA^+$, over 95% Mn(II) was extracted from an aqueous solution into chloroform by the cupferron in the pH range of 4 to 10. But a part of Mn(II) was extracted with only cupferron. The ternary complex of Mn(II) was more efficiently extracted into $CH_2Cl_2$ and $CHCl_3$ than other nonpolar solvents. The extracted Mn(II) was determined in the back-extracted $HNO_3$ solution by GF-AAS. This fixed procedure was applied to the determination of trace Mn(II) in tap water samples of pH 5.0. The detection limit equivalent to 3 times standard deviation of the background absorption was 0.37 ng/mL and Mn(II) was determined with the range of 0.4 to 1.01 ng/mL in our laboratory's tap water. And the recovery was 94 to 107% in samples in which 2.0 ng/mL Mn(II) was spiked. The interferences of common concomitant elements such as Cu(II), Ca(II), Fe(III) and so on were not shown up to $10{\sim}20{\mu}g/mL$. From these results, this procedure could be concluded to be applied for the determination of trace Mn(II) in other environmental water samples.

• Analytical Science and Technology
• /
• v.25 no.2
• /
• pp.152-157
• /
• 2012

Currently, many types of compound preparations are being used but the quality control guidelines for their use are lacking. In case of single compound drug, the quality control methods are specified in the pharmacopeia. However, there is no method to simultaneously analyze compound preparations. In this study, a simple validated analytical method for HPLC separation of chlorquinaldol and promestriene is introduced. Validation was divided into categories including linearity, precision, accuracy (recovery) and system suitability. The contents of the products which are on the market were monitored using the validated analytical method and the robustness of the analytical method was tested by conducting an inter-laboratory validation.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.174-181
• /
• 2013

Pyrifluquinazon is classified with a quinazoline insecticide that regulates food intake by controling the feeding behavior acting on the endocrine or nervous system of pests such as aphids and white fly. To keep safety on pyrifluquinazon residues in agricultural commodities a simple, accurate and rapid analytical method was developed and validated using high performance liquid chromatograph (HPLC-UVD). The pyrifluquinazon residues acidified with 1% formic acid in samples were extracted with acetonitrile and partitioned with hexane subsequently to dichloromethane then purified with silica solid phase extraction (SPE) cartridge. The purified samples were detected using HPLC-UVD. The method was validated using apple and pear spiked with pyrifluquinazon at 0.02, 0.05 and 0.1 mg/kg and hulled rice, pepper, soybean at 0.05 and 0.1 mg/kg. Average recoveries were 70.5~107.9% with relative standard deviation less than 10%. The result of recoveries and overall coefficient of variation of a laboratory results in Gwangju regional FDA and Daejeon regional FDA was followed with Codex guideline (CODEX CAC/GL 40). This method is appropriated at pyrifluquinazon residues determination and will be used as official method of analysis.

• Applied Biological Chemistry
• /
• v.51 no.1
• /
• pp.65-69
• /
• 2008

The roots of Brassica campestris ssp rapa were extracted with 80% aqueous MeOH, and the concentrated extract was partitioned with EtOAc, n-BuOH and $H_2O$. From the EtOAc fraction, three compounds were isolated through the repeated silica gel and octadecyl silica gel (ODS) column chromatography. From the results of spectroscopic data including NMR and MS, the chemical structures of the compounds were determined as caulilexin C (1), indoleacetonitrile (2) and arvelexin (3). The arvelexin (3) has been isolated from this plant for the first time. Compounds 1, 2 and 3 showed inhibitory activity on human Acyl CoA: cholesterol. transferase 1 (hACAT1) by $54.6{\pm}6.0%$, $69.2{\pm}4.7%$ and $68.6{\pm}3.7%$, and on human Acyl CoA: cholesterol transferase 2(hACAT2) by $4.8{\pm}13.4%$, $45.6{\pm}4.8%$ and $39.5{\pm}4.3%$, respectively, at 100 ${\mu}g/ml$.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.6
• /
• pp.131-142
• /
• 2020

The objective of this study was to evaluate future inundation risk of farmland according to the application of coupled model intercomparison project phase 5 (CMIP5) and coupled model intercomparison project phase 6 (CMIP6). In this study, future weather data based on CMIP5 and CMIP6 general circulation model (GCM) were collected, and inundation was simulated using the river modeling system for small agricultural watershed (RMS) and GATE2018 in the Tanjung district of the Moohan stream watershed. Although the average probable rainfall of CMIP5 and CMIP6 did not show significant differences as a result of calculating the probability rainfall, the difference between the minimum and maximum values was significantly larger in CMIP6. The results of the flood discharge calculation and the inundation risk assessment showed similar to trends to those of probability rainfall calculations. The risk of inundation in the future period was found to increase in all sub-watersheds, and the risk of inundation has been analyzed to increase significantly, especially if CMIP6 data are used. Therefore, it is necessary to consider climate change effects by utilizing CMIP6-based future weather data when designing and reinforcing water structures in agricultural areas in the future. The results of this study are expected to be used as basic data for utilizing CMIP6-based future weather data.