• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.84-92
• /
• 2016

Compared with Si MOSFETs, the GaN FET has many advantages in a wide band gap, high saturation drift velocity, high critical breakdown field, etc. This paper compares the electrical properties of GaN FETs and Si MOSFETs. The soft-switching condition and power loss analysis in a flyback-forward high gain DC/DC converter with a GaN FET is presented in detail. In addition, a comparison between GaN diodes and Si diodes is made. Finally, a 200W GaN FET based flyback-forward high gain DC/DC converter is established, and experimental results verify that the GaN FET is superior to the Si MOSFET in terms of switching characteristics and efficiency. They also show that the GaN diode is better than the Si diode when it comes to reverse recovery characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.314-315
• /
• 2008

We have studied a property change of organic light-emitting diodes (OLED)s due to a surface reformation of indium-tin-oxide(ITO) substrate. An ITO is widely used as a transparent electrode in light-emitting diodes, and the OLEDs device performance is sensitive to the surface properties of the ITO. The ITO surface reformation could reduce the Schottky barrier at the ITO/organic interface and increase the adhesion of the organic layer onto the electrode. We have studied the characteristics of OLEDs with a treatment by a wet processing of the ITO substrate. The self-assembled monolayer(SAM) was used for wet processing. The characteristics of OLEDs were improved by SAM treatment of an ITO in this work. The OLEDs with a structure of ITO/TPD(50nm)/$Alq_3$(70nm)/LiF(0.5nm)/Al(100nm) were fabricated, and the surface properties of ITO were investigated by using seneral characterization techniques. Self-assembled monolayer introduced at the anode/organic interface gave an improvement in turn-on voltage, luminance and external quantum efficiency compared to the device without the SAM layer. SAM-treatment time of the ITO substrate was made to be 0/10/15/20/25min. The current efficiency of the device with 15min. treated SAM layer was increased by 3 times and the external quantum efficiency by 2.6 times.

• 센서학회지
• /
• 제12권2호
• /
• pp.66-71
• /
• 2003

Pt/AlGaN Schottky-type UV photodetectors were designed and fabricated. A low-temperature AlGaN interlayer buffer was grown between the AlGaN and GaN film in the diode structure epitaxy to obtain crack-free AlGaN active layers. A comparison was then made of the structural, electrical, and optical characteristics of two different diodes: one with an AlGaN($0.5\;{\mu}m$)/n+-GaN(2 nm) structure (type 1) and the other with an AlGaN($0.5\;{\mu}m$)/AlGaN interlayer($150\;{\AA}$)/n+-GaN($3\;{\mu}m$) structure(type 2). A crack-free AlGaN film was obtained by the insertion of a low-temperature AlGaN interlayer with an aluminum mole fraction of 26% into the $Al_xGa_{1-x}N$ layer. The fabricated Pt/$Al_{0.33}Ga_{0.67}N$ photodetector had a leakage current of 1 nA for the type 1 diode and $0.1\;{\mu}A$ for the type 2 diode at a reverse bias of -5 V. For the photoresponse measurement, the type 2 diode exhibited a cut-off wavelength of 300 nm, prominent responsivity of 0.15 A/W at 280 nm, and UV-visible extinction ratio of $1.5{\times}10^4$. Accordingly, the Pt/$Al_{0.33}Ga_{0.67}N$ Schottky-type ultraviolet photodetector with an AlGaN interlayer exhibited superior electrical and optical characteristics and improved UV detecting properties.

• Journal of Information Display
• /
• 제7권1호
• /
• pp.35-40
• /
• 2006

Organic light-emitting diode (OLED) display panel using the charge-pump (CP) pixel addressing scheme was fabricated, and the results show that it is applicable for information display. A CP-OLED panel with 64 ${\times}$ 64 pixels consisting of thin-film capacitors and amorphous silicon Schottky diodes was fabricated using conventional thin-film processes. The pixel drive circuit passes electrical current into the OLED cell during most of the frame period as in the thin-film transistor (TFT)-based active-matrix (AM) OLED displays. In this study, the panel was operated at a voltage level of below 4 V, and this operation voltage can be reduced by eliminating the overlap capacitance between the column bus line and the common electrode.

• 전력전자학회논문지
• /
• 제20권3호
• /
• pp.223-231
• /
• 2015

LEDs have been widely used in lighting displays, automobiles, and airplanes owing to their excellent light output characteristics and long lifespan. Though LEDs are manufactured under the same process, variations in impurity concentrations cause electrical deviation among LEDs. The resulting electrical deviation can not only reduce the life time of the LED but also cause non-uniform luminance of LEDs connected in parallel. LED driving circuit is required to solve these problems. In this paper, we propose a LED driving system using Y-type current balancing transformer to maximize the efficiency of the system by removing output stage Schottky diodes. Experimental results are presented to verify the performance of proposed LED driving system that is applied to 80 W LED modules.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.66-70
• /
• 2003

본 논문에서는 쇼트키 장벽 빔 리드 다이오드와 180$^{\circ}$ hybrid coupler를 이용하여 24.10GHz 대역에서 동작하는 단일 평형 주파수 혼합기를 설계 및 제작하였다. 제작된 혼합기는 변환손실이 6 [dB], RF/LO 격리도가 [23]dB, P1dB(in)는 5 [dBm]의 결과를 얻었다. 본 논문에서 제작한 혼합기는 근거리 표적 탐지용 homedyne 레이더에 이용가능 할 것이다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.207-208
• /
• 2006

분자선(分子線)에피택시법(法)으로 성장(成長)한 ZnO 산화물반도체(酸化物半導體)를 이용(利用)하여 제작(製作)한 쇼트키배리어 다이오드에 대하여 자외선(紫外線) 광(光)센서로서의 광특성(光特性)을 조사(調査)한다. 첫째, 백색광(白色光) 조사시(照射時) 포화전류치(飽和電流値)가 100배(培) 이상(以上) 증가(增加)하는 광(光)여기 특성(特性)을 나타낸다. 둘째, 조사(照射)하는 �셈� 파장(波長)에 대하 390nm의 차단장파장(遮斷長波長)을 갖으며 195nm 이상(以上)의 밴드폭을 갖는 파장감도특성(波長感度特性)을 나타낸다. 셋째, 자외선(紫外線)에 대해 0.36msec의 시정수(時定數) 갖는 것으로 평가(評價)된다. 따라서, ZnO 산화물반도체(酸化物半導體)는 향후(向後) 자외선(紫外線) 광(光)센서소자의 재과(材科)로서 기대(期待)되어진다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.727-731
• /
• 2005

Design and manufacturing process of a full color LED microdislay fabricated by standard CMOS technology and containing an array of aluminum / nanostructured porous silicon reverse biased light emitting Schottky diodes will be discussed. Being of a solid state construction, this microdisplays are cost-effective, thin and light in weight due to very simple device architecture. Its benefits include also super high resolution, wide viewing angles, fast response time and wide operating temperature range. The advantages of full integration of an LED-array and driving circuitry onto a Si-chip will be also discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.187-190
• /
• 1996

Conducting polymers have band structures similar to those of inorganic semiconductors such as silicon. Several electronic devices have been constructed with conjugated polymers, mainly Schottky diodes and Metal-Insulator-Semiconductor Field-Effect Transistors (MISFET's). Organic semiconductor has been reported as active materials in MISFET's.$^{1.4}$ In our laboratory, $\alpha$-Sexithiencyl ($\alpha$-6T) has been synthesized and purified by sublimation method. In this study, thin films of $\alpha$-Sexithienyl were prepared on various substrates in ultra-high vacuum chamber by vacuum evaporation method, so called OMBD(Organic Molocular Beam Deposition).$^{7.9}$ The $\alpha$-Sexithienyl thin films were deposited with various deposition conditions. The crystalline structure, and molecular orientation of these films have being studied by using UV/Vis. spectroscopy and X-Ray Diffractometry.

• 대한전자공학회논문지
• /
• 제27권1호
• /
• pp.81-90
• /
• 1990

In this study, ion beam deposited tungsten thin film for gate material of GaAs SAGFET(Self Aligned Gate FET) was annealed from 800\ulcorner to 900\ulcorner using RTA and detailed investigations of structural and electrical characteristics of this film were carried out using four-point probe, XRD, SEM, AES and current-voltage measurement. Investigated results showed phase of as deposited tungsten film was fine grain \ulcornerphase and phase tdransformation of this film into \ulcornerphase occured at annealing condition of 900\ulcorner, 6sec. But regardless of phase transformation, electrical characteristics of tungsten film were very stable to 900\ulcorner and in case of 900\ulcorner, 4sec annealing condition Schottky barrier height obtained from 10 diodes measurements was 0.66 + 0.003 eV.