• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 춘계학술대회
• /
• pp.655-668
• /
• 2013

In this study, a combination of the plasma discharge in the reactor by the reaction surface discharge reactor complex catalytic reactor and air pollutants, hazardous gas SOx, change in frequency, residence time, and the thickness of the electrode, the addition of simulated composite catalyst composed of a variety of gases, including decomposition experiments were performed by varying the process parameters. 20W power consumption 10kHz frequency decomposition removal rate of 99% in the decomposition of sulfur oxides removal experiment that is attached to the titanium dioxide catalyst reactor experimental results than if you had more than 5% increase. If added to methane gas was added, the removal efficiency increased decomposition, the oxygen concentration increased with increasing degradation rate in the case of adding carbon dioxide decreased.

• 한국안전학회지
• /
• 제22권4호
• /
• pp.51-56
• /
• 2007

In order to present basic data for the balancing improvement of safety management level in domestic construction companies the improvement index and characteristic of safety management level are offered by comparing the year 2006's safety level with the year 2001's one. The companies under concern are classified into 51 large scale companies and 61 middle and small scale ones. The safety management level of both head office and construction sites is improved for all companies without regard to the scale. Specially, the improvement index of middle and small scale companies shows the higher rate than large ones and head office higher than construction sites.

• 정보보호학회논문지
• /
• 제25권4호
• /
• pp.793-805
• /
• 2015

현대의 자동차는 안전필수(Safety Critical) 시스템이기 때문에 차량의 안전성을 보장하는 것은 물론 초 연결사회를 지향하는 사물인터넷 기술의 발전과 자동차의 스마트화 됨에 따른 자동차 보안문제가 대두됨에 따라 자동차 소프트웨어와 공급망에서의 보증 방안과 공급망에서 발생할 수 있는 위험을 식별, 평가 및 통제하기 위한 위험관리 방안이 필요하다. 본 논문에서는 자동차 Life-Cycle 내에서 이해관계자 별 위험관리(A-SCRM, Automotive Supply Chain Risk Management) 방법을 연구 제안한다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.508-515
• /
• 2022

Construction safety education will continue to attract the interests of construction educators, researchers, and industry professionals due to its immense influence on accident reduction and prevention. A well-educated workforce with a thorough understanding of safety requirements and procedures is needed to develop and apply effective safety and health programs as well as devise strategic means of preventing injuries, illnesses, and fatalities on construction projects. The objective of this research is to evaluate construction safety education in the curriculum of construction programs in the United States. An analysis of construction safety courses across accredited construction programs in the U.S. is conducted to synthesize important details and common themes. A nationwide characterization of the safety courses presented followed by an assessment selected a few programs as a pilot study. Critical elements of the courses such as course titles, course year, credit hours, topics covered, and alignment with professional certification or outreach training courses are characterized. Findings from the study reveal the similarities and variations that exist among safety courses taught in different construction programs in the U.S. These findings could result from several influencing factors, which could be the subject of further investigations geared toward improving safety education in construction programs.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.272-277
• /
• 2017

CCTV image processing techniques have been developed for safety management in manufacturing sites. However, CCTV growth has become a social problem for video surveillance with regard to privacy. This study aims to manage the safety system efficiently and protect privacy simultaneously. In this study, the CCTV monitoring system is composed of five steps (accident monitoring, detection, notification, management, restoration). De-identified image is observed when we are in a normal situation. De-identified image changes to identified image when it detects an accident. As soon as it detects an accident, the accident information is sent to the safety administrator. Then the administrator could conduct safety measures. Afterward, accumulated accident data could be used for statistical data that could be utilized as analyzing expecting accident.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.266-271
• /
• 2004

Recently, consumers require products with high-reliability and high-safety. Risk management system and product safety become more important issue In view of product liability. This paper aims to propose a risk assessment system which can be applied to product with high-reliability and high-safety, and also show an empirical application of the proposed risk assessment system for the development of motorcycle helmets.

• 디지털산업정보학회논문지
• /
• 제20권1호
• /
• pp.59-74
• /
• 2024

In order to improve safety consciousness due to the increase in disasters and safety accidents, safety education is necessary to prepare for disasters with interest in safety. This study is a board game design for disaster safety education for elementary school students based on Keller's learning motivation theory. By considering the school safety curriculum and the safety education contents of the School Safety Mutual Aid Association and the Ministry of Public Administration and Security, the content and goals of learning were derived and the order of learning was determined. When designing game content, the fun elements of the game were applied to Keller's learning motivation inducing factors such as attention concentration (A), relevance (R), confidence (C), satisfaction (S), and educational game design elements to induce the achievement of learning goals at the game planning stage. It is expected that the existing safety education focusing on lecture-style and audiovisual will be supplemented and used in the educational field.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1048-1052
• /
• 2005

In Korean cases, the occupation of building construction is below 10% of the total industry workers but from a accident rate point of view, it is a risk serious industry and it's hazard is very considerable which accident rate is up to 30% of the total industry workers. The reason of high accident rate of the building construction is its own characteristic, hazard of the work in which is implicated and the shortage of safety counter plan and information, so it is most required to the building construction that educating, training, short and long period approaching to prevent the hazard. The safety information of building construction which is related to safety accident is divided into human and material such as hazard, work situation, cause and counter plan. The existing hazard cases imply all of the information about the work type and work progress of the building construction, so if the research of the every fact is well accomplished, we can obtain the useful information and prevent the hazard of building construction. From this point of view, the emphasis of this study is based on analyzing the cause of hazard first, suggesting the safety information each part of work type and work progress second, and finally making the all existing hazard cases to the Data Base and developing the safety information system.

• Geomechanics and Engineering
• /
• 제24권6호
• /
• pp.519-529
• /
• 2021

In coal mining activities, the abutment stress of the coal has to undergo cyclic loading and unloading, affecting the strength and seepage characteristics of coal; additionally, it can cause dynamic disasters, posing a major challenge for the safety of coal mine production. To improve the understanding of the dynamic disaster mechanism of gas outburst and rock burst coupling, triaxial devices are applied to axial pressure cyclic loading-unloading tests under different axial stress peaks and different pore pressures. The existing empirical formula is use to perform a non-linear regression fitting on the relationship between stress and permeability, and the damage rate of permeability is introduced to analyze the change in permeability. The results show that the permeability curve obtained had "memory", and the peak stress was lower than the conventional loading path. The permeability curve and the volume strain curve show a clear symmetrical relationship, being the former in the form of a negative power function. Owing to the influence of irreversible deformation, the permeability difference and the damage of permeability mainly occur in the initial stage of loading-unloading, and both decrease as the number of cycles of loading-unloading increase. At the end of the first cycle and the second cycle, the permeability decreased in the range of 5.777 - 8.421 % and 4.311-8.713 %, respectively. The permeability decreases with an increase in the axial stress peak, and the damage rate shows the opposite trend. Under the same conditions, the permeability of methane is always lower than that of helium, and it shows a V-shape change trend with increasing methane pressures, and the permeability of the specimen was 3 MPa > 1 MPa > 2 MPa.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.154-161
• /
• 2005

As disasters in the modem era become a large scale and complexity, no single entity can manage them. Instead collective cooperation between civilian, enterprise, school and government sectors is significantly needed, along with a well prepared mechanism. Thus, I attempt to construct the applicable network of civilian, enterprise, school and government sectors for disaster management through exemplary case studies of established countries as well as Korea's current operations and its drawbacks, based upon a networking design of disaster management organizations as belows: Firstly, it is cooperation and coordination among relevant organizations that are required essentially in the new era, in view of formative condition of necessary environment for civil participation. The cooperation and coordination can be made only through the network of civilian, enterprise, school and government sectors. Secondly, in order to build up the network, major roles and tasks which should be done by civilian, enterprise, school and government sectors respectively are listed based upon a stage of disaster management. Thirdly, operation models of a safety monitoring unit, a disaster prevention unit, a emergency response unit, and a rehabilitation unit are proposed in line with the network of civilian, enterprise, school and government sectors in regional base.