• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.648-656
• /
• 2022

As environmental regulations such as the International Maritime Organization (IMO)'s strategy to reduce greenhouse gases(GHG) are strengthened, technology development such as eco-friendly ships and alternative fuels is expanding. As part of this, ship propulsion technology using energy reduction and wind propulsion technology is emerging, especially in shipping companies and shipbuilders. By securing wind propulsion technology and introducing empirical research into shipbuilding and shipping, a high value-added market using eco-friendly technology can be created. Moreover, by reducing the fuel consumption rate of operating ships, GHG can be reduced by 6-8%. Rotor Sail (RS) technology is to generate a hydrodynamic lift in the vertical direction of the cylinder when the circular cylinder rotates at a constant speed and passes through the fluid. This is called the Magnus effect, and this study attempted to propose a plan to increase propulsion efficiency through a numerical analysis study on turbulence flow characteristics around RS, a wind power assistance propulsion system installed on a ship. Therefore, C_L and C_D values according to SR and AR changes were derived as parameters that affect the aerodynamic force of the RS, and the flow characteristics around the rotor sail were compared according to EP application.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.49-55
• /
• 2022

According to reinforce environmental regulations, coal power plants have used selective catalytic reduction using ammonia as a reducing agent to reduce the amount of nitrogen oxide generation. The purpose of the present study was to derive a mixing device for effectively mixing dilute air and ammonia in the ammonia mixing pipe by performing computational fluid dynamic analysis. The mixing effect was compared by analysing the %RMS of ammonia concentration at the down stream cross section in the mixing pipe and the 16 outlets based on the case 1-1 shape, which is an existing mixing pipe without a mixing device. The mixing device was performed by changing the positions of a square plate on the downstream side of the ammonia supply pipe and an arc-shaped plate on the wall of the mixing pipe. In the case of the existing geometry(Case 1-1), the %RMS of ammonia concentration at the 16 outlets was 29.50%. The shape of the mixing device for Case 3-2 had a square plate on the downstream side of the ammonia supply pipe and an arc plate was installed adjacent to it. The %RMS of ammonia concentration for Case 3-2 was 2.08% at 16 outlets and it could be seen that the shape of Case 3-2 was the most effective mixing shape for ammonia mixing.

• Journal of Industrial Convergence
• /
• v.21 no.7
• /
• pp.19-27
• /
• 2023

As the secondary battery market expands, the process of producing laterite ore using the rotary kiln and electric furnace method is expanding worldwide. As ESG management expands, the management of air pollutants such as nitrogen oxides in exhaust gases is strengthened. The rotary kiln, one of the main facilities of the pyrometallurgy process, is a facility for drying and preliminary reduction of ore, and it generate nitrogen oxides, thus prediction of nitrogen oxide is important. In this study, LSTM for regression prediction and LightGBM for classification prediction were used to predict and then model optimization was performed using AutoML. When applying LSTM, the predicted value after 5 minutes was 0.86, MAE 5.13ppm, and after 40 minutes, the predicted value was 0.38 and MAE 10.84ppm. As a result of applying LightGBM for classification prediction, the test accuracy rose from 0.75 after 5 minutes to 0.61 after 40 minutes, to a level that can be used for actual operation, and as a result of model optimization through AutoML, the accuracy of the prediction after 5 minutes improved from 0.75 to 0.80 and from 0.61 to 0.70. Through this study, nitrogen oxide prediction values can be applied to actual operations to contribute to compliance with air pollutant emission regulations and ESG management.

• The Korean Journal of Franchise Management
• /
• v.2 no.1
• /
• pp.1-45
• /
• 2011

Franchising is one of the most effective strategies in promoting business establishment, creating jobs and accelerating economic growth. Thus, many countries in the world foster franchise business and support the franchise industry by enacting relevant regulations and making development policies. Vietnam deregulated franchise market through making franchise-related laws on June, 2005 and after joining WTO in 2009, Vietnamese government opened up the franchise market by letting foreign investors acquire 100% share on their investment in Vietnam. In addition, Vietnamese consumer's rapidly growing income and increasing liking for western life style make Vietnamese franchise market attractive and profitable. For this reason, many global franchise firms are competing to get the best seats. However, there has been no Korean attempt to profoundly study over Vietnamese franchise market. The purpose of this study would focus on analyzing and evaluating cases of Korean and international firms which successfully entered Vietnamese market and on proposing effective strategies and key success factors. The result of this study indicates that the companies successfully settled down to the Vietnamese market have developed marketing strategies which fit their strengths, and their common key success factors are 1) making the best of first mover advantage, 2) adapting themselves to local tastes and behaviors via systematic and scientific market research, 3) making thorough supervision on safety and hygiene, 4) doing strategy of firstly directly being operated and settled down by franchisor, later being managed by franchisees, 5) benchmarking both successful and failed cases in other countries.

• Information Systems Review
• /
• v.25 no.4
• /
• pp.1-25
• /
• 2023

The online fitness industry has experienced rapid growth in recent years, overcoming physical constraints of conventional fitness programs. The COVID-19 pandemic accelerated the trend as social distancing policies were implemented. However, as financial distress of offline gyms worsened, the Korean government implemented the "With-COVID19" policy, which lifted most of the restrictions and regulations on offline gyms, on November 1st, 2021, raising concerns about the loss of drivers for the growth of the online fitness industry. Using regression discontinuity design in time (RDDiT), this study investigates the causal effect of the "With-COVID19" policy on the viewer engagement of online fitness content. Contrary to expectations that viewer engagement would decrease, it increased by 21%. Additionally, subgroup analysis based on opportunity cost reveals heterogeneity, and the high-cost group experienced a greater increase of 32% compared to low-cost group. Based on these findings, the study provides possible mechanisms of the increase, theoretical contributions on using RDDiT in the Information Systems, and practical implications for guidelines on managing online fitness platforms and content in the era of digital transformation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.116-118
• /
• 2023

In recent years, the need for economical and sustainable ship routing has emerged due to the enforced regulations on environmental issues. Despite the development of weather forecasting technology, maritime accidents by rough waves have continued to occur due to incorrect weather forecasts. In this study, onboard measurements are conducted to observe the acutal situation on merchant ships in operation encountering rough waves. The types of measured data include information related to navigation (Ship's position, speed, bearing, rudder angle) and engine (engine revolutions, power, shaft thrust, fuel consumption), weather conditions (wind, waves), and ship motions (roll, pitch, and yaw). These ship experiments was conducted to 28,000 DWT bulk carrier, 63,000 DWT bulk carrier, 20,000 TEU container ship, and 12,000 TEU container ship. The actual ship experiment of each ship is intended to acquire various types of data and utilize them for multi-objective studies related to ship operation. Additionally, in order to confirm the sea conditions, the directional wave spectrum was reproduced using a wave simulation model. Through data collection from ship experiments and wave simulations, various studies could be proceeding such as the measurement for accurate wave information by marine radar and analysis for cargo collapse accidents. In addition, it is expected to be utilized in various themes from the perspective of safety and efficiency in ship operation.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.716-723
• /
• 2023

Global discussions are actively underway regarding the introduction of urban air mobility (UAM) to revolutionize the paradigm in the innovative mobility industry. While research related to airspace, vertiports, navigation, and communication pertinent to Korean UAM is actively pursued by relevant research institutions, there is a significant dearth in studies focusing on establishing concepts for operational management by UAM operators and formulating control procedures. The commercialization of UAM necessitates the establishment of standardized operational management concepts, pivotal as benchmarks for the individual system development among multiple UAM operators. This paper analyzes UAM exceptional law, operational readiness, existing regulations pertaining to commercial and rotary-wing aircraft, and proposes suitable approaches to formulate domestic low-density operational management and control procedures. By presenting strategies for conceptualizing operational management and control procedures in the initial low-density environment for UAM, this paper aspires to contribute to future trail operations and the wider adoption of UAM.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.3
• /
• pp.93-100
• /
• 2024

Pore water freezes in low-temperature compaction, which leads to different compaction characteristics compared to room temperature conditions. In regions like Alberta, Canada, where organic soils are prevalent, compaction performance is influenced by the high water retention and compressibility of organic soils, as well as their sensitivity to freezing and thawing. Alberta's strict environmental regulations demand the reuse of excavated soil for backfill, and the long winter season creates challenging conditions for civil engineering projects. In this study, a laboratory compaction test was conducted to evaluate the low-temperature compaction characteristics of organic soils with varying organic content. The results indicate that the optimum moisture content increases as the organic content increases, and the maximum dry unit weight decreases by up to 21.9%. In addition, under temperature conditions below -4℃, no optimum moisture content was observed, and the dry unit weight decreased as the moisture content increased.

• Journal of East-West Nursing Research
• /
• v.7 no.1
• /
• pp.32-47
• /
• 2002

This study is a descriptive comparative investigated one to analyze nursing education system and curriculum of Korea and China trans-culturally. 1) Education System The basic level of nursing education in Korea consisted of 65 3-year- junior college of nursing (7379 students) and 48 4-year-bachelor of nursing college (2345 students) in 2000 showing more 3-year-junior college of nursing and its students. In China, western nursing as well as Chinese nursing education system were operating. In 2000, 501 western school of middle technical nursing, 29 school of middle technical nursing of middle level education, and 89 3-year western and 24 Chinese junior college of nursing, and 42 4-year western bachelor of nursing college and 10 Chinese of high level education have been established. The presence of Chinese school of middle technical nursing system seemed to be in slower development in nursing than Korea, but that of Chinese nursing education seemed to be advanced with its national identification prior to Korea. Post graduate continuous education for RN-Diploma and RN-BSN program has been opened as in Korea. The Hosa(護士) system in school of middle technical nursing in China reflects lower level of education than Korea. But it can be a merit, other than in Korea, without nurses aids, when they are acting under supervision of nurses and led by them, and there presents a special course for promotion up to high level education. Graduate school in Korea is divided into general type opening a curriculum for MS in 1960 and as of 2000, 21 general types for majoring in nursing. The PhD course in Korea was established in 1978, and after that the PhD courses have been opening in 14 universities at present. China established master degree course in 1991 and as of 7 colleges are ongoing, and the doctoral course is now under planning, resulting slower development than Korea. 2) Education of theory and clinical practice in Korea and Chine (1) Korea's 3-year junior nursing college have 51 subjects, 49 subjects in China, which was not different. China was following education of ideology and medical. 4-year Bachelor of Science College has 92 subjects in Korea with cultural subjects and essential major studies/elective in theory education in Korea, while 63 subjects in China, showed wider selection in Korea's education. (2) Korea's 3-year and 4-year nursing colleges performed clinical practice education parallel with theoretical education for a certain period, block or theory/practice system. While China's 3-year and 4 or 5-year-colleges educated the theory first and then practice for one year in the last grade, integrating each situation of the departments and the theory. (3) Korea's oriental nursing theory in nursing education was performed in 28 colleges of 65 nationwide ones of 3-year junior nursing colleges, but only one school was educating clinical practice. In 4-year bachelor of nursing colleges, the oriental nursing theory was done in 14 among 48 investigated. And 1-4 subjects of them were doing, and 4 schools performed of clinical practice, showing more reinforced than the junior colleges. China's 3-year and 4-5-year western nursing colleges taught two subjects of Chinese medicine nursing. China's 3-year & 4-5-year College of Chinese medicine nursing, theory of Chines medicine nursing education taught eight subjects. (4) 5-year colleges of Chinese medicine western integrated nursing, theory of Chinese medicine nursing education consisted of twelve Chinese medicine nursing subjects and two of Chinese medicine western integrated nursing subjects. China was tempting a new development of a pattern of Chinese medicine nursing subjects reinforced. 3) The verification of Korean and Chinese nurse's license. The verification test of Chinese nurses license is differentiated at the level of education other than in Korea. Expire date is 2 years and a qualified test must be done to a renewal. And the continuing education hours are 72 per year, which is more enforced than Korean nurses (10 hours a year). In accordance with WTO regulations, we should prepare for opening foreign hospital, educating oriental nursing subjects. And on this, it is recommendable to settle a basic frame research to run the oriental nursing practice ongoing. 1. It is desirable to develop the oriental nursing subjects to apply its idea to the western nursing and differentiate Korean nursing. 2. It is desirable to certify oriental nurse's characters, to expand and develop the nursing areas to practice it, and to establish the oriental nursing system. 3. It is expectable to promote Korean nursing specialization to develop the oriental nursing as a professional and to create its demand.

• Journal of Intelligence and Information Systems
• /
• v.29 no.4
• /
• pp.271-286
• /
• 2023

The global COVID-19 pandemic has transformed face masks from situational accessories to indispensable items in daily life, prompting a shift in public perception and behavior. While the relaxation of mandatory mask-wearing regulations is underway, a significant number of individuals continue to embrace face masks, turning them into a form of personal expression and identity. This phenomenon has given rise to the Fashion Mask industry, characterized by unique designs and colors, experiencing rapid growth in the market. However, existing research on masks is predominantly focused on their efficacy in preventing infection or exploring attitudes during the pandemic, leaving a gap in understanding consumer preferences for mask design. We address this gap by investigating consumer perceptions and preferences for two prevalent mask designs-horizontal fold flat masks and vertical fold flat masks. Through a comprehensive approach involving surveys and eye-tracking experiments, we aim to unravel the subtle differences in how consumers perceive these designs. Our research questions focus on determining which design is more appealing and exploring the reasons behind any observed differences. The study's findings reveal a clear preference for vertical fold flat masks, which are not only preferred but also perceived as unique, sophisticated, three-dimensional, and lively. The eye-tracking analysis provides insights into the visual attention patterns associated with mask designs, highlighting the pivotal role of the fold line in influencing these patterns. This research contributes to the evolving understanding of masks as a fashion statement and provides valuable insights for manufacturers and marketers in the Fashion Mask industry. The results have implications beyond the pandemic, emphasizing the importance of design elements in sustaining consumer interest in face masks.