• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.348-359
• /
• 2017

Recently, various public transportation activation policies are being implemented in order to mitigate traffic congestion in metropolitan areas. Especially in the metropolitan area, the bus information system has been introduced to provide information on the current location of the bus and the estimated arrival time. However, it is difficult to predict the travel time due to repetitive traffic congestion in buses passing through complex urban areas due to repetitive traffic congestion and bus bunching. The previous bus travel time study has difficulties in providing information on route travel time of bus users and information on long-term travel time due to short-term travel time prediction based on the data-driven method. In this study, the path based long-term bus travel time prediction methodology is studied. For this purpose, the training data is composed of 2015 bus travel information and the 2016 data are composed of verification data. We analyze bus travel information and factors affecting bus travel time were classified into departure time, day of week, and weather factors. These factors were used into clusters with similar patterns using self organizing map. Based on the derived clusters, the reference table for bus travel time by day and departure time for sunny and rainy days were constructed. The accuracy of bus travel time derived from this study was verified using the verification data. It is expected that the prediction algorithm of this paper could overcome the limitation of the existing intuitive and empirical approach, and it is possible to improve bus user satisfaction and to establish flexible public transportation policy by improving prediction accuracy.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.71-81
• /
• 2008

In this paper, we propose a novel Globally Asynchronous, Locally Dynamic System(GALDS) bus and demonstrate its performance. The proposed GALDS bus is the bidirectional multitasking bus with the segmented bus architecture supporting the concurrent operation of multi-masters and multi-slaves. By analyzing system tasks, the bus architecture chooses the optimal frequency for each If among multiples of bus frequency and thus we can reduce the overall power consumption. For efficient data communications between IPs operating in different frequencies, we designed an asynchronous and bidirectional FIFO based on an asynchronous wrapper with hand-shaking interface. In addition, since systems can be easily expandable by inserting bus segments, the proposed architecture has advantages in IP reusability and structural flexibility As a test example, a four-segment bus haying four masters and four slaves were designed by using Verilog HDL. We demonstrate multitasking operations with read/write data transfers by simulation when the ratios of operation frequency are 1:1, 1:2, 1:4 and 1:8. The data transfer mode is a 16 burst increment mode compatible with Advanced Microcontroller Bus Architecture(AMBA). The maximum operation latency of the proposed GALDS bus is 22 clock cycles for the bus write operation, and 44 clock cycles for read.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1469-1472
• /
• 2019

CAN bus in automotive applications does not assign node addresses. When a node is hacked and it transmits malicious data frame, it is difficult to resolve which node is hacked. However, this CAN bus internal attack seriously threatens the safety of a car, so a prompt counterattack is necessary in the CAN bus physical layer. This paper proposes a counterattack method against malicious CAN bus internal attack. When a malicious data frame is detected, an intrusion detection system in the CAN bus increases the error counter of the malicious node. Then, the malicious node is off from the bus when its error counter exceeds its limit. A CAN controller with the proposed method is implemented in Verilog HDL, and the proposed method is proved to counterattack against malicious CAN bus internal attack.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.172-184
• /
• 2014

Economic growth with rising household income has put more vehicles on the roads worsening traffic congestion, road accidents, and air and noise pollution. This situation is further aggravated by the potential working population who choose to drive to work instead of taking public transportation. Public bus transport (PBT) plays an important role in alleviating these problems. PBT is underutilized in Malaysia, and there is an opportunity to increase ridership without substantial investment. Therefore, this study was conducted to investigate the factors that influence the use of PBT in Malaysia. The data were collected using structured questionnaires from 400 respondents. The results of the analysis show that the twin factors consisting of perceived satisfaction of and perceived importance by users towards safety and comfort of facilities and services offered by PBT are significantly related to intention to use those services. The satisfaction of availability of season tickets, the importance of reliability of bus schedule and time table, and the importance of ticket pricing are also significant. By providing insights for both public bus operators and the government, this paper contributes to mitigate the underutilization of PBT in Malaysia and the consequences of putting more vehicles on the roads. From the theory perspective, this paper also contributes by extending the theory of reasoned-action to transportation studies.

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.63-75
• /
• 2013

The School Bus Routing Problem(SBRP) seeks to plan an efficient schedule of a fleet of school buses that must pick up student from various bus stops and deliver them by satisfying various constraints; maximum capacity of the bus, maximum riding time of students, arrival time between a school's time window. By extending the existing SBRP, we consider a case study of SBRP with allowance of mixed-loading and dynamic arrivals reflecting the school bus operation of university in Korea. Our solution procedure is based on constructing the initial solution using sweep algorithm and then improving solution within the framework of the evolutionary approach known as efficient meta-heuristics. By comparing the various scenarios through the constraints relaxation for reflecting the real operational strategies, we assess the merit of our proposed procedure.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.116-122
• /
• 2024

AMBA AHB-Lite bus is widely used in on-chip bus protocol for low-power and cost-effective SoC. However, it lacks built-in error detection and correction for end-to-end data integrity. This can lead to data corruption and system instability, particularly in harsh environments like automotive applications. To mitigate this problem, this paper proposes the application of SEC-DED (Single Error Correction-Double Error Detection) to AMBA AHB-Lite bus. It aims not only to detect errors in real-time but also to correct them, thereby enhancing end-to-end data integrity. Simulation results demonstrate real-time error detection and correction when errors occur, which bolsters end-to-end data integrity of automotive on-chip bus.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.885-888
• /
• 2015

A secure and effective on-chip bus for detecting and preventing malicious attacks by infected IPs is presented in this paper. Most system inter-connect (on-chip bus) are vulnerable to hardware Trojan (Malware) attack because all data and control signals are routed. A proposed secure bus with modifications in arbitration, address decoding, and wrapping for bus master and slaves is designed using the Advanced High-Performance and Advance Peripheral Bus (AHB and APB Bus). It is implemented with the concept that arbiter checks share of masters and manage infected masters and slaves in every transaction. The proposed hardware is designed with the Xilinx 14.7 ISE and verified using the HBE-SoC-IPD test board equipped with Virtex4 XC4VLX80 FPGA device. The design has a total gate count of 40K at an operating frequency of 250MHz using the $0.13{\mu}m$ TSMC process.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2499-2502
• /
• 2005

Universal Serial Bus (USB) is one of the most popular communication interfaces. When USB is used in more extended range, especially configuring home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of Time Division Multiplexing (TDM) so that the bottleneck of bus bandwidth can be brought under the heavy traffic. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced. Basically, in order to realize the system for transferring real-time moving picture data among digital information devices, we analyze USB transfer types and descriptors and introduce the method to enhance the detailed performance of isochronous transfer that is one of USB transfer types.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.347-350
• /
• 2004

The objective of this study is to discuss the future trend of the community bus. In doing so, we have selected Nagasaki City of Japan. Geographic Information Systems (GIS) is used for selection of the routes. In the present study we are going to add new parameters and new selection method. As a result of the study, we have been able to identify some best possible and detailed routes for the community bus operation in Nagasaki City, which meets the requirement of the welfare community as well as general passengers.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.447-453
• /
• 2009

Cycling has been lately recommended as an alternative commuting mode because it is believed to be good for health and the environment. However, the exposure to environmental pollutants, such as fine particulates, could be a potential problem for cycling in urban environments. In this study, we compared commuters' $PM_{10}$ exposure using the different transportation modes of bicycle and bus. When a bicycle was used as a commuting mode, the additional $PM_{10}$ exposure due to transportation was about 3.5 times higher than that when using a bus. The difference of additional $PM_{10}$ exposures by cycling and bus was statistically significant (p<0.01). The $PM_{10}$ exposure during cycling was significantly correlated with atmospheric $PM_{10}$ concentration (r=0.98, p<0.01) and its correlation coefficient was higher than that of bus (r=0.55, p<0.05). The results of this study demonstrated that the main reasons of higher $PM_{10}$ exposure when using the bicycle as the mode of transport were its vicinity to road traffic and routes that were unavoidably close to road traffic. Bicycle commuting along the road side may not be good for health. Exclusive bicycle lanes away from road traffic are recommended.