• 한국철도학회논문집
• /
• 제20권5호
• /
• pp.612-624
• /
• 2017

기존 수도권 광역철도는 운행시간이 많이 걸리는 완행 위주의 운행을 하기 때문에 통행시간 측면에서 타 교통수단과의 경쟁력이 저하되고 있는 실정이고, 도로교통을 철도로 유인하는데 한계가 있기 때문에 급행열차 운행을 확대 운영해야 한다는 사회적 요구가 지속되고 있다. 특히 수도권 북부와 수도권 남서부 방면은 대도시 생활권 확대로 광역교통수요 증대에 따른 교통 혼잡 가중 및 통행시간 증가 등 사회적 비용이 과다 발생되고 있어 서울도심을 연결하는 급행 기능의 대중교통망체계가 필요하다. 국내에서 가장 효율적으로 급행화를 운행하는 노선은 서울지하철 9호선이며, 김포공항에서 고속터미널까지 27분 소요됨으로써 완행 44분 대비 약 40% 시간 단축 효과가 있고 혼잡도가 최대 240%에 달할 만큼 이용객의 선호도가 상당히 높다. 본 연구의 기술적 결과들은 광역철도의 급행화 방안의 수행을 위해 기여할 수 있을 것이라 기대한다.

• 한국항해항만학회지
• /
• 제37권2호
• /
• pp.137-142
• /
• 2013

The displacement Deep-V catamaran concept was developed in Newcastle University(UNEW) through development of the systematic Deep-V catamaran series. One of the most important Deep-V catamaran launched to date is Newcastle University's own multi-purpose research vessel, The Princess Royal. The vessel was launched in 2011 and enhanced the Deep-V catamaran concept further with the successful adoption of a novel anti-slamming bulbous bow and tunnel stern for improved efficiency. It was however identified that the vessel has substantial amount of dynamic trim that limited the visibility of the captain. The dynamic trim also increased the wave-making resistance thereby preventing the vessel from attaining its maximum speed in certain sea states. This paper therefore presents the application of devices such as Trim Tabs, Interceptors, Transom Wedges and Integrated Transom Wedges-Tabs to control the dynamic trim and improvement of fuel efficiency of the vessel. All of these energy saving devices were fitted into a model for tests in Newcastle University's Towing Tank. Model test verification confirmed that the optimum appendage was the interceptors, they produced a 5% power saving and 1.2 degree trim reduction at 15 knots, and investigations of full scale trials will be scheduled with and without application of device to compare the improvement of performance.

• International Journal of Computer Science & Network Security
• /
• 제23권9호
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.

• 국제물리치료학회지
• /
• 제5권2호
• /
• pp.743-751
• /
• 2014

This study aims to identify the effect of home physical therapy on patients who left the hospital after total knee arthroplasty, compared to the Daily living group, when it was applied to them, under the guidance of physical therapists. As research subjects, 20 patients that were scheduled to leave the hospital after unilateral total knee arthroplasty, were chosen, and they were randomly divided into a home physical therapy group(10 patients) and an Daily living group(10 patients) in order to conduct an experiment. During the 4-week research, home physical therapy was offered for 40 mins once for 5 days a week, and muscular strength, gait components were measured. For muscular strength, quadriceps muscle strength, hamstring muscle strength were measured, and as gait components, endurance, speed, step time, single-limb support were analysed. For this experiment, pre- and post-measurement were performed, and collected data were analyzed using SPSS ver. 18.0 statistical program. From the analysis of data, the following study results were obtained. Home physical therapy group and Daily living group both showed significant improvements in quadriceps muscle strength, hamstring muscle strength, and quadriceps muscle strength, hamstring muscle strength of home physical therapy group more significantly improved than Daily living group's. In relation to gait components, gait endurance, gait speed, step time significantly improved in both of home physical therapy group and Daily living group, whereas home physical therapy group only showed significant improvements in single-limp support. According to the comparison between two groups, gait speed, single-limp support and step time improved more significantly in the home physical therapy group than in the Daily living group. In conclusion, positive results were revealed in both home physical therapy group and Daily living group, with regard to muscular recovery of lower limbs of patients discharged from the hospital after total knee arthroplasty and walking, but considering the comparison results between two groups, it seems that applying home physical therapy is more effective than maintaining a daily life.

• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.56-59
• /
• 2011

The characterization of the chemical mechanical polishing (CMP) process for undensified phophosilicate glass (PSG) film is reported using design of experiments (DOE). DOE has been used by experimenters to understand the relationship between the input variables and responses of interest in a simple and efficient way, and it typically is beneficial for determining the appropriatesize of experiments with multiple process variables and making statistical inferences for the responses of interest. The equipment controllable parameters used to operate the machine consist of the down force of the wafer carrier, pressure on the back side wafer, table and spindle speeds (SS), slurry flow (SF) rate, pad condition, etc. None of these are independent ofeach other and, thus, the interaction between the parameters also needs to be understoodfor improved process characterization in CMP. In this study, we selected the five controllable equipment parameters the most recommendedby process engineers, viz. the down force (DF), back pressure (BP), table speed (TS), SS, and SF, for the characterization of the CMP process with respect to the material removal rate and film uniformity in percentage terms. The polished material is undensified PSG which is widely used for the plananization of multi-layered metal interconnects. By statistical modeling and the analysis of the metrology data acquired from a series of $2^{5-1}$ fractional factorial designs with two center points, we showed that the DF, BP and TS have the greatest effect on both the removal rate and film uniformity, as expected. It is revealed that the film uniformity of the polished PSG film contains two and three-way interactions. Therefore, one can easily infer that process control based on a better understanding of the process is the key to success in current semiconductor manufacturing, in which the size of the wafer is approaching 300 mm and is scheduled to continuously increase up to 450 mm in or slightly after 2012.

• 한국항공운항학회지
• /
• 제15권4호
• /
• pp.9-16
• /
• 2007

Tilt rotor aircraft can take off and land vertically and cruise faster than any other helicopter. A scaled flight demonstration model of a tilt rotor aircraft has been developed by KARI. Because the flight characteristics of tilt rotor are not well known, the developed scaled model would be helpful to evaluate flight control algorithm of a full scale aircraft. The tethered hover test has been performed in order to improve hover flight characteristics of tilt rotor aircraft prior to flight test of the small scaled model. During the tethered hover test, the performance of rotor speed governor, rate SAS (Stability Augmentation System) and control surface mixers have been evaluated. We expect that the results of real flight hover test would be quite same as tethered hover test. Therefore the tethered hover test results will reduce the risk of flight test properly by fixing some of hidden problems which might occur during the flight test. This paper presents the results of tethered hover test in detail and shows how it could be final ground test before flight test. The control mixer gain and rate SAS feedback gains were modified in order to get higher controllability and stability during the tethered hover flight. The rotor governor showed that it could keep rotor RPM constant with very small deviation even during severe pilot collective input change. The tethered hover test results gave pilot and engineers confirmation and experience about the scheduled flight test.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.52-61
• /
• 2015

본 연구에서는 가변 입구 안내익과 블리드 공기 스케줄에 따른 터보팬 엔진에서의 천이 성능특성을 수치적으로 분석하였다. 대상 엔진으로 저 바이패스비 혼합 흐름 터보팬 엔진을 선정하였다. 압축기 가변 입구 안내익에 따른 성능 변화를 고려하기 위해 평균 반경 해석법을 이용하여 압축기 성능성도를 도출하고 엔진 해석 프로그램에 입력하였다. 정상상태 조건에서 축류 압축기 서지마진 10%를 만족하도록 회전속도에 따른 가변 입구 안내익과 블리드 공기 스케줄을 각각 도출하였다. 도출된 스케줄을 이용하여 엔진 천이 성능해석을 수행하였다. 엔진 천이 성능해석 수행 결과 가변 입구 안내익을 사용하는 경우가 블리드 공기를 사용하는 경우보다 천이과정에서 높은 서지마진과 낮은 터빈 입구 온도를 보였다.

• 연구논문집
• /
• 통권27호
• /
• pp.87-99
• /
• 1997

Present paper describes on/off design performance of a 50KW turbogenerator gas turbine engine for hybrid vehicle application. For optimum design point selection, relevant parameter study is carried out. The turbogenerator gas turbine engine for a hybrid vehicle is expected to be designed for maximum fuel economy, ultra low emissions, and very low cost. Compressor, combustor, turbine, and permanent-magnet generator will be mounted on a single high speed (82,000 rpm) shaft that will be supported on air bearings. As the generator is built into the shaft, gearbox and other moving parts become unnecessary and thus will increase the system's reliability and reduce the manufacturing cost. The engine has a radial compressor and turbine with design point pressure ratio of 4.0. This pressure ratio was set based on calculation of specific fuel consumption and specific power variation with pressure ratio. For the given turbine inlet temperature, a rather conservative value of $1100^\circK$ was selected. Designed mass flow rate was 0.5 kg/sec. Parametric study of the cycle indicates that specific work and efficiency increase at a given pressure ratio and turbine inlet temperature. Off design analysis shows that the gas turbine system reaches self operating condition at N/$N_{DP}$ = 0.53. Bleeding air for turbine stator cooling is omitted considering low TIT and for a simple geometric structure. Various engine performance simulations including, ambient temperature influence, surging at part load condition. Transient analysis were performed to secure the optimum engine operating characteristics. Surge margin throughout the performance analysis were maintained to be over 80% approximately. Validation of present results are yet to be seen as the performance tests are scheduled by the end of 1998 for comparison.

• 정보학연구
• /
• 제4권3호
• /
• pp.165-170
• /
• 2001

정보기술을 바탕으로 한 지도력의 역할은 지난 10년에 걸쳐서 많은 변화를 가져왔다. 이러한 변화에도 불구하고 최근에 정보기술이 지도력에 미치는 영향에 관한 경험적인 연구가 거의 되지 않고 있는 실정이다. 본 연구에서는 지도력에 있어서 정보를 제공하는 역할과 결정을 내릴 수 있는 역할 그리고 각 개인간의 역할과 같은 일반적인 지도력에 관련된 역할을 중심으로 하였다. 또한 직무의 특성별로 기획입안자, 직무 개선자, 연구개발 책임자, 마케팅 책임자, 관리자 및 운영 전략가 둥과 같은 분야에서 근무하고 있는 지도자들의 지도력에 미치는 영향을 조사하였다. 정보기술을 사용하는 정보시스템 관리자들은 개인간의 지도력의 역할범위에 따라 그 미치는 영향이 다를 수 있으며 정보시스템이 현재의 위치에서 시간이 지나매 따라 부정적인 영향을 미칠 수도 있지만 변화를 추구하는 지도자의 역할에 있어서는 시간이 흐름에 따라 정보기술 사용의 범위와 전략적 책임의 범위 및 기업과 조직의 수익에 지대한 영향을 미칠 것으로 사료된다. 비록 일반적인 지도력의 역할에 관해서는 그 중요성이 지금까지 연구한 바는 있지만 정보시스템 기술이 지도력에 미치는 영향에 관한 체계적인 연구는 아직 미흡하므로 이 분야에 대해서 연구 조사를 중심으로 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1269-1278
• /
• 2009

수도권에는 49%로의 인구가 집중되어 있고, 광역교통망이 갖춰져 있지 않아 성남축, 고양/파주축, 인천/부천축 등에는 교통량 증대로 교통혼잡, 통행시간지연 등의 교통문제가 발생되고 있다. 고양/파주축에는 대중교통분담율이 51.2%이고, 송용차는 48.8%로 높은 상태이며, 지하철은 27.3%로 낮고, 택지 개발계획을 통해 53만인 거주계획 등이 있어 광역철도교통이 요구되고 있다. 강남$\sim$일산간 37.8Km/h에 급행철도 도입에 관한 연구를 수행한 결과, 150Km/h의 급행열차를 운행할 경우는 강남에서 킨텍스까지 표정속도는 103Km/h이고, 소요시간은 약 23분정도이다. 본 사업노선의 교통수요를 분석한 결과 일일 237,000명 정도(환송 포함)로 예측되었고, B/C는 1.08로서 사업의 경제적 타당성은 있는 것으로 분석되었다.