Browse > Article
http://dx.doi.org/10.6108/KSPE.2015.19.5.052

A Numerical Study on Transient Performance Behavior of a Turbofan Engine with Variable Inlet Guide Vane and Bleed Air Schedules  

Kim, Sangjo (Department of Aerospace Engineering, Pusan National University)
Son, Changmin (School of Mechanical Engineering, Pusan National University)
Kim, Kuisoon (Department of Aerospace Engineering, Pusan National University)
Kim, Myungho (The 4th R&D Institute, Agency for Defense Development)
Min, Seongki (The 4th R&D Institute, Agency for Defense Development)
Publication Information
Journal of the Korean Society of Propulsion Engineers / v.19, no.5, 2015 , pp. 52-61 More about this Journal
Abstract
This paper performed a numerical study to analyse the transient performance behavior of a turbofan engine with variable inlet guide vane (IGV) and bleed air schedules. The low bypass ratio mixed flow turbofan engine was considered in this study. For modeling the compressor performance with IGV, the performance maps were generated by using a one-dimensional meanline analysis and feed to the engine simulation program. The IGV and bleed air according to the rotating speed were scheduled to satisfy 10% of surge margin at steady-state condition. The transient engine performance analysis was conducted with the schedules. The engine with IGV schedule showed a higher surge margin and lower turbine inlet temperature than the engine with bleed air schedule during the transient period.
Keywords
Variable Inlet Guide Vane; Bleed Air; Turbofan Engine; Transient Analysis;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Rolls-Royce, The jet engine, 5th ed., Rolls-Royce plc, London, England, 2005.
2 Peng, W.W., Fundamentals of turbomachinery, 1st ed., John Wiley & Sons, Hoboken, N.J., USA, 2008.
3 Gallar, L., Arias, M., Pachidis, V. and Singh, R., "Stochastic Axial Compressor Variable Geometry Schedule Optimisation," Aerospace Science and Technology, Vol. 15, No. 5, pp. 366-374, 2011.   DOI   ScienceOn
4 Evans, A.B., "The Effects of Compressor Seventh-stage Bleed Air Extraction on Performance of the F100-PW-220 Afterburning Turbofan Engine," NASA CR-179447, 1991.
5 Barbosa, J.R., Silva F.J., Tomita, J.T. and Bringhenti, C., "Influence of Variable Geometry Transients on Gas Turbine Performance," ASME Turbo Expo 2011, Vancouver, Canada, GT2011-46565, June 2011.
6 Bringhenti, C., Tomita, J.T., de Sousa Junior, F. and Barbosa, J.R., "Gas Turbine Performance Simulation Using an Optimized Axial Flow Compressor," ASME Turbo Expo 2006, Barcelona, Spain, GT2006-91225, May 2006.
7 Shadaram, A., Fathi, A. and Azizi, R., "Optimization of Variable Stator's Angle for Off Design Compression Systems Using Streamline Curvature Method," ASME Turbo Expo 2009, Orlando, F.L., USA, GT2009-59772, June 2009.
8 Curnock, B., Yin, J., Hales, R. and Pilidis, P., "High-bypass Turbofan Model using a Fan Radial-profile Performance Map," Aircraft Design, Vol. 4, No. 2, pp. 115-126, 2001.   DOI   ScienceOn
9 Honeywell F124 Turbofan Engine Brochure, http://www51.honeywell.com/aero/portal/Common/Documents/myaerospacecatalog-documents/Defense_Brochures-documents/F124_Engine.pdf, June 2015.
10 Suzuki, M. and Kuno, N., "Research and Development of Two-stage Fan Component in HYPR Project," 31st Propulsion Conference and Exhibit, San diego, C.A., USA, AIAA 95-2344, 2001.
11 Garrett Turbine Engine Company, "Air Force Mixed-flow Compressor Garrett Turbine Engine Company," Report No. 21-4460-2.3, 1982.
12 NPSS Team, "NPSS User Guide Software Release: NPSS 2.4.1," Ohio Aerospace Institute, Cleveland, Ohio, USA, 2012.
13 Jones S.M., "An Introduction to Thermodynamic Performance Analysis of Aircraft Gas Turbine Engine Cycles Using the Numerical Propulsion System Simulation Code," NASA TM-2007-214690, 2007.
14 Sellers J.F. and Daniele C.J., "DYNGEN - A Program for Calculating Steady-state and Transient Performance of Turbojet and Turbofan engines," NASA TN D-7901, 1975.
15 Kim, S., Kim, D., Son, C., Kim, K., Kim, M. and Min, S., "New Profile Loss Model for Improved Prediction of Transonic Axial Flow Compressor Performance in Choking Region," ASME Turbo Expo 2015, Montreal, Canada, GT2015-42797, June 2015.
16 Aungier, R.H., Axial-flow Compressors: A Strategy for Aerodynamic Design and Analysis, 1st ed., The American Society of Mechanical Engineers, New York, N.Y., USA, 2003.
17 Lieblein, S., "Experimental Flow in Two-Dimensional Cascades," NASA SP-36, pp.183-226, 1965.
18 Hu, J.F., Zhu, X.C., OuYang, H., Qiang, X.Q. and Du, Z.H., "Performance Prediction of Transonic Axial Compressor Based on Streamline Curvature Method," Journal of mechanical science and technology, Vol. 25, No. 12, pp. 3037-3045, 2011.   DOI   ScienceOn
19 Wright, P.I. and Miller, D.C., "An Improved Compressor Performance Prediction Model," RR-PNR-90873, 1991.
20 Jansen, W. and Moffatt, W.C., "The Off-design Analysis of Axial-flow Compressors," Journal of Engineering for Power, Vol. 89, No. 4, pp. 453-462, 1967.
21 Walsh, P.P. and Fletcher, P., Gas Turbine Performance, 2nd ed., Blackwell Science Ltd, Oxford, UK, 2005.
22 Liu, Y., Dhingra, M. and Prasad, J.V.R., "Active Compressor Stability Management Via a Stall Margin Control Mode," Journal of Engineering for Power, Vol. 132, No. 5, pp. 051602-1-10, 2010.