• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권3호
• /
• pp.12-19
• /
• 2006

본 연구에서는 우리나라의 경주에서 산출된 칼슘벤토나이트 콜로이드의 안정성에 대한 연구를 동적광산란 방법을 이 용하여 이온강도 및 pH 등의 지화학적 조건 변화에 따른 크기 변화를 관측함으로써 수행하였다. 속도론적 및 평형상태에서 pH 및 이온강도의 변화에 따른 칼슘벤토나이트 콜로이드의 크기변화를 관측하였다. 실험결과 칼슘벤토나이트 콜로이드의 안정성은 접촉시간, 매질의 이온강도와 pH 에 매우 크게 의존함을 보였으며 0.01 M $NaClO_4$ 이상의 이온강도에서는 고려된 대부분의 pH 에서 콜로이드가 불안정함을 보였다. 아울러 칼슘벤토나이트 콜로이드의 안정비 W와 CCC(Critical Coagulation Concentration) 등을 속도론적 응집 실험 자료들을 이용하여 계산하였다. 안정비 W는 이온강도가 증가함에 따라 감소하는 경향을 뚜렷하게 나타내었으며 pH 변화에 따른 W 값의 변화는 이온강도에 따라 다른 양상을 보였다. 또 pH 7 근처에서 칼슘벤토나이트 콜로이드의 CCC 는 약 0.05 M $NaClO_4$ 임을 알 수 있었다.

• 대한금속재료학회지
• /
• 제49권6호
• /
• pp.474-487
• /
• 2011

Bars of OFHC Cu with the diameter of 45 mm were processed by equal channel angular pressing up to 16 passes via route $B_c$, and homogeneity of their microstructures and mechanical properties was examined at every four passes which develop the equiaxed ultrafine grains. In general, overall hardness, yield strength and tensile strength increased by 3, 7, and 2 times respectively compared with those of unECAPed sample. Cross-sectional hardness exhibited a concentric distribution. Hardness was the highest at the center of bar and it decreased gradually from center to surface. After 16 passes, overall hardness decreased due to recovery and partial recrystallization. Regardless of the number of passage, yield strength and tensile strength were quite uniform at all positions, but elongation showed some degree of scattering. At 4 passes, coarse and ultrafine grains coexisted at all positions. After 4 passes, uniform equiaxed ultrafine grains were obtained at the center, while uniform elongated ultrafine grains were manifested at the upper half position. At the lower half position, grains were equiaxed but its size were inhomogeneous. It was found that inhomogeneity of grain morphology and grain size distribution at different positions are to be attributed to scattering in elongation but they did not affect strength. The present results reveal the high potential of practical application of equal channel angular pressing on fabrication of large-sized ultrafine grained bars with quite homogeneous mechanical properties.

• 한국융합학회논문지
• /
• 제13권4호
• /
• pp.287-292
• /
• 2022

본 논문에서는 소재의 강도에 따라 U 채널형상 제품의 판재성형공정에서 발생하는 스프링백 현상의 산포경향의 분석을 수행하였다. 성형공정의 유한요소해석 및 신뢰성 기반 최적화 기법을 적용하여 인장강도, 항복강도, 소재 두께 등 재질 산포와 마찰계수와 패딩력 등의 공정 산포를 고려하여 산포해석을 실시하였다. 산포해석 결과 산포에 유의한 영향을 미치는 인자는 항복강도와 인장강도 순으로 나타났으며, 소재의 인장강도가 클수록 스프링백 양은 증가하는 반면 스프링백의 산포량이 감소하는 것을 확인하였다. 주요 변형이 발생하는 펀치 어깨부와 다이 어깨부의 변형률과 응력 산포 분석을 통하여 스프링백 산포량 감소의 원인을 분석하였다. 본 논문에 제안된 산포분석기법을 활용할 경우 불가피하게 발생하는 성형공정의 산포를 예측하고 대응이 가능할 것으로 기대된다.

• 한국음향학회지
• /
• 제40권4호
• /
• pp.330-336
• /
• 2021

양상태 능동 소나에서 수중 표적의 산란 강도는 사용된 신호의 주파수, 표적과 음원사이의 각도를 의미하는 자세각, 표적과 수신기 사이의 각도를 나타내는 양상태각 등의 운용 변수에 따라 다르게 나타난다. 따라서 양상태 소나의 표적 탐지 및 식별 성능은 소나 운용 과정에서 표적, 음원, 그리고 수신기의 위치를 어떻게 변화시키느냐에 따라 그 성능이 달라질 수 있다. 본 연구에서는 양상태 소나 운용 시 자세각을 변화시키는 경우와 양상태각을 변화시키는 경우의 표적 식별 성능을 비교하여 어떤 변수를 변화시키는 것이 유리한지 평가하였다. 속이 비어있는 구와 실린더를 식별하는 시나리오를 가정하였으며, 유한요소법 기반의 음향 산란 시뮬레이션을 이용하여, 서포트 벡터 머신으로 두 표적을 분류하고 정확도를 비교하는 방법으로 성능을 비교하였다. 표적의 산란 신호만을 고려하기 위하여, 해저면 잔향의 효과는 고려하지 않았다. 비교 결과, 자세각을 고정한 상태에서 주파수와 양상태각으로 정의되는 산란 강도를 이용하는 것이 우수한 평균 분류 정확도를 보여주었으며, 이는 양상태 소나를 이용하여 구와 실린더를 식별하고자 하는 경우, 음원의 위치를 고정시킨 상태에서 수신기를 이동하여 양상태각을 변화시키는 것이 표적 식별에 더 효과적임을 보여준다.

• 수산해양기술연구
• /
• 제45권3호
• /
• pp.157-164
• /
• 2009

Due to change of various marine environments according to seawater temperature rising, Japanese common squid(Todarodes pacificus), which was distributed in East Sea, was recently caught in Yellow Sea during a summer season from 2006. The fishery resources density research was carried out in Korea-China Provisional Water Zone using trawl fishing gear and acoustics in National Fisheries Research & Development Institute in Korea. This paper showed the analysis on the acoustical backscattering strength by two frequencies(38kHz, 120kHz) for Japanese common squid by acoustical scattering theoretical model based on size distribution for survey period, and estimate the density distribution for squid s integrated layer which was extracted from any scatterers distributed in water column using two frequency difference method which has been used to distinguish fish shoals or specific target scatterers from sound scattering layer which is composed of various zooplankton. Furthermore, the entire range of their density estimation was suggested using by Monte Carlo simulation under considering each uncertainty such as size distributions or swimming angle and so on in survey area.

• 수산해양기술연구
• /
• 제51권1호
• /
• pp.120-127
• /
• 2015

Morphological properties of dark banded rockfish (Sebastes inermis) were analysed to investigate its acoustic scattering characteristics. Total of 18 live samples was prepared for X-ray photos and collected morphological coordinates of their body and swim bladder shapes. Kirchhoff-ray mode model was used to calculate acoustic scattering pattern for broad-band frequency range. Inclination of swim bladder ranged from 17 to 30 and the averaged value was about $25.2^{\circ}$ (S.D.(standard deviation)=3.15). There were no any tendency of increase or decrease in volume and area ratio of swim bladder to fish body and ranged from 2.2 % to 4.43 % and 14.85 % to 21.31 %, respectively. The averaged value of volume and area ratio was 3.13 % (S.D.=0.52) and 17.6 % (S.D.=1.5). $b_{20}$ values were -69.01 for 38 kHz, -69.83 for 70 kHz, -70.17 for 120 kHz and -70.93 for 200 kHz, recpectively. Broadband acoustic patterns of dark banded rockfish for 20 ~ 200 kHz were similar among samples and they reflected size and morphological properties of fish species.

• 천문학회보
• /
• 제41권2호
• /
• pp.40.2-40.2
• /
• 2016

The attenuation of starlight by dust in galactic environments is investigated through models of radiative transfer in a spherical, clumpy interstellar medium (ISM). We show that the attenuation curves are primarily determined by the wavelength dependence of absorption rather than by the underlying extinction (absorption+scattering) curve; the observationally derived attenuation curves cannot constrain a unique extinction curve unless the absorption or scattering efficiency is specified. Attenuation curves consistent with the Calzetti curve are found by assuming the silicate-carbonaceous dust model for the Milky Way (MW), but with the $2175{\AA}$ bump suppressed or absent. The discrepancy between our results and previous work that claimed the Small Magellanic Cloud dust to be the origin of the Calzetti curve is ascribed to the difference in adopted albedos; we use the theoretically calculated albedos whereas the previous ones adopted empirically derived albedos from observations of reflection nebulae. It is found that the model attenuation curves calculated with the MW dust are well represented by a modified Calzetti curve with a varying slope and UV bump strength. The strong correlation between the slope and UV bump strength, as found in star-forming galaxies at 0.5 < z < 2.0, is well reproduced if the abundance of the UV bump carriers is assumed to be 30-40% of that of the MW-dust; radiative transfer effects lead to shallower attenuation curves with weaker UV bumps as the ISM is more clumpy and dustier. We also argue that some of local starburst galaxies have a UV bump in their attenuation curves, albeit very weak.

• 한국음향학회지
• /
• 제20권3호
• /
• pp.91-97
• /
• 2001

능동소나 시스템에서 표적신호의 근거리 정보가 중요해짐에 따라, 표적 음향산란 신호의 고유한 특성을 분석하기 위해 실험적인 방법과 시뮬레이션 기법이 사용된다. 본 논문에서는 표적신호 합성을 위해 축소표적 반향실험을 수행하였고. 자료의 분석 결과 축소표적의 음향산란은 거울면 반사의 영향이 큰 것으로 분석되어, 표적신호 합성에서 기하광학이론을 응용하였다. 복잡한 형태의 표적을 여러 표본형상으로 분리하고, 각 표본형상의 기여도를 신호의 위상과 강도를 줌으로써 계산하였으며, 표적신호 합성모델의 검증을 위해 실제 축소표적 실험 결과와 비교하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권3호
• /
• pp.155-158
• /
• 2014

The phase transformation of Sn-Pb-Bi solder for photovoltaic ribbon during soldering was studied using real-time synchrotron x-ray scattering. At room temperature, Sn and Pb crystal phases in the solder existed separately. By heating to $92^{\circ}C$, a new PbBi alloy crystal phase was formed, which grew further up to $160^{\circ}C$. The Sn crystal phase first started to melt at $160^{\circ}C$, and was mostly melted at $165^{\circ}C$. In contrast, the Pb and PbBi crystal phases started to melt at $165^{\circ}C$, and were mostly melted at $170^{\circ}C$. The useful result was obtained, that the solder's melting temperature decreased from $183^{\circ}C$ to $170^{\circ}C$ by addition of a small amount of Bi atoms to the eutectic Sn62-Pb38 (wt%) solder. Our study first revealed the detailed in-situ phase transformation of Sn-Pb-Bi solder during heating to the eutectic temperature. Considering the results of peel strength and hardness, adding 1 wt% of Bi atoms to the Sn62-Pb38 (wt%) solder produced an appropriate composition.

• 대한금속재료학회지
• /
• 제46권7호
• /
• pp.464-470
• /
• 2008

Metallic nanostructures have great potential for bio-chemical sensor applications due to the excitation of localized surface plasmon and its sensitive response to environmental change. Unlike the commonly explored absorption-based sensing, the optical scattering provides single particle detection scheme. For the localized surface plasmon resonance spectroscopy, the metallic nanostructures with controlled shape and size have been usually fabricated on adhesion-layer pre-coated transparent glass substrates. In this study, we calculated the optical scattering properties of plasmonic Au nanodisc using a discrete dipole approximation method and analyzed the effect of adhesion layer on them. Our result also indicates that there is a trade-off between the surface plasmon damping and the capability of supporting nanostructures in determining the optimal thickness of adhesion layer. Marginal thickness of Ti adhesion layer for supporting Au nanostructures fabricated on a silica glass substrate was experimentally analyzed by an adhesion strength test using a nano-indentation technique.