• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.102-108
• /
• 1992

To clarify the structure of a diesel spray, a transient non-evaporating diesel spray injected under different ambient pressure and different injection pressure was studied. Spray tip penet- ration and spray angle were measured by taking the high speed shadowgraph of spray and Sauter mean Diameter(SMD) was also measured by light scattering technique at different positions along the spray axis and at different time from the start of injection. The effects of the operating parameters on the spray shape and SMD were investigated. By increasing the injection pressure, the spray tip penetration and the spray angle increased and the change of the ambient pressure also resulted in the considerable change in the shape of the spray. The analysis of SMD measurement showed that the atomization is a process that continues in sp- ace and time. As the injection pressure increases SMD decreases rapidly and with the increa- se of the ambient pressure the atomization process ends faster than the lower ambient press- ure and at lower pressure the atomization process continues to much farther downstream and far afterward.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.71-72
• /
• 2006

We investigated a simultaneous living anionic polymerization process of isoprene (I) and 4styrene-d_8$ (S) in $benzene-d_6$ as a solvent with sec-buthyllithium as an initiator into polyisoprene(PI)-block-poly($styrene-d_8$)(PS) and the polymerization-induced molecular self-assembling process. This process was observed in-situ by time-resolved small-angle neutron scattering (SANS) experiment. The SANS profiles measured exhibited three time regions, where (i) the selective growth of PI chains occurs; (ii) the living chain ends switch from isoprenyllithium to styryllithium, and (iii) the SANS exhibited the polymerization induced disorder-to-order transition and order-to-order transition.

• Korean Journal of Optics and Photonics
• /
• v.9 no.1
• /
• pp.31-37
• /
• 1998

We fabricated acrylamie photopolymer holographic recording materials by photopolymerization of acrylamide, and described hologram formation process. Light absorption and phtobleaching process by MB(methylene blue) dye and radical polymerization process due to TEA(triethanolamind) are explained in detail. We adopted the Beer-lambert law in order to explain the photobleaching kinetics. Dependencies of diffraction efficiency of the hologram on monomer amout and the exposure are investigated. The scattering effect caused by grain of polymer crystal, and fixing method are also illustrated.

• Applied Microscopy
• /
• v.50
• /
• pp.28.1-28.6
• /
• 2020

Contamination on two-dimensional (2D) crystal surfaces poses serious limitations on fundamental studies and applications of 2D crystals. Surface residues induce uncontrolled doping and charge carrier scattering in 2D crystals, and trapped residues in mechanically assembled 2D vertical heterostructures often hinder coupling between stacked layers. Developing a process that can reduce the surface residues on 2D crystals is important. In this study, we explored the use of atomic force microscopy (AFM) to remove surface residues from 2D crystals. Using various transmission electron microscopy (TEM) investigations, we confirmed that surface residues on graphene samples can be effectively removed via contact-mode AFM scanning. The mechanical cleaning process dramatically increases the residue-free areas, where high-resolution imaging of graphene layers can be obtained. We believe that our mechanical cleaning process can be utilized to prepare high-quality 2D crystal samples with minimum surface residues.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.39-40
• /
• 2022

The use of asbestos has been completely prohibited in Korea since 2015. Therefore, nationally, the asbestos demolitions in the building are actively underway. In the process of demolishing asbestos, scattering dust occurs, which poses a risk to human body. These dusts causes fatal disease, and especially there is an increasing concern of safety about construction workers and building users. Until this day, however, only few researches have been conducted on asbestos demolishing process. Accordingly, it is necessary to analyze key factors and to develop a safety prediction model for workers. This study is an early stage of building quantified DB, and aims to actualize the safety problems of asbestos demolishing process using text mining method.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.355-356
• /
• 2003

Coagulation is a process whereby particles collide with one another due to their relative motion, and adhere to form large particles. Coagulation caused by the random Brownian motion of particles is called Brownian coagulation. Many properties, such as light scattering, electrostatic charges, toxicity, as well as physical processes, including diffusion, condensation and thermophoresis depend strongly on their size distribution. Therefore, Brownian coagulation is substantially important in atmospheric science, combustion technology, inhalation toxicology and nuclear safety analysis. (omitted)

• Progress in Medical Physics
• /
• v.1 no.1
• /
• pp.75-84
• /
• 1990

We have claculated the absorbed dose distributions in water phantom irradiated by high energy photon beam. PDD (Percent Depth Dose) and Beam Profile can be represented by functions of depths and distances by using one dimensional model model based on transport theory. The parameters on scattering and absorption are evaluated by using non-linear regression process method. The values neeessary for calculation are obtained by simple experiment. The calculated values are in good agreement with the measured values.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.196-200
• /
• 1998

Effect of diffusion induced recrystallization(DIR) on mechanical properties of hot-pressed TiC was in-vestigated. The TiC specimen was electroplated with Cr and then heat-treated at 1550. Through the DIR process a new set of (Ti, Cr) C mixed carbide grains with uniform and small size was formed at the surface. As a consequence the scattering in fracture strength decreased and the toughness increased.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.05a
• /
• pp.79-84
• /
• 1999

The shock wave diffracted behind a finite wedge is partially scattered after interacting with a starting vortex originated from the sharp vertex of the wedge. The shock is divided into the accelerated and decelerated shocks. The decelerated shock then interacts with the small vortexlets brought about by the vortex instability, producing weak compression waves. The shock-shock interaction produces Mach stems. Through this successive process, the shock attenuated. In this study, these complicated shock phenomena are computed using Euler equations and compared with experimental results obtained by the authors.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.76.2-76.2
• /
• 2012

We present the first simulations of cosmic reionization that include the first stars and their radiative feedback that limited their formation, in a volume large enough to capture the spatial variations that affected the process and its observability. We show hat these first stars made reionization begin much earlier than without, and was reatly extended, which boosts the intergalactic electron-scattering optical depth and the large-angle polarization fluctuations of the cosmic microwave background (CMB) significantly. Although within current WMAP uncertainties, this will enable Planck see he signature of the first stars at high redshift, currently undetectable by other probes.