• 한국전자파학회논문지
• /
• 제27권6호
• /
• pp.557-565
• /
• 2016

현대 전장에서 널리 사용되는 미사일 표적은 작은 레이다 단면적 및 빠른 기동 특성으로 인하여 탐지가 매우 힘들다. 특히 미사일과 유사한 운동 변수로 기동하는 기만체의 존재 때문에 표적의 병진운동 변수들이 아닌 다른 형태의 특성 벡터를 추출할 필요가 있다. 본 연구에서는 성공적인 미사일 표적의 식별을 위하여 미세운동을 하는 표적의 미세운동변수 및 산란점 추출을 위한 효과적인 기법을 제안한다. 제안된 기법에서는 모델링 된 미세 도플러 함수와 신호처리 된 수신신호의 시간-주파수 영상과의 정합을 비용함수로 사용하여 미세운동변수들과 산란점들의 위치를 추출하였다. 점 산란원으로 구성된 표적을 이용한 시뮬레이션 결과, 미세운동 및 산란점들의 변수가 정확하게 추출되었다.

• 자원환경지질
• /
• 제37권5호
• /
• pp.509-519
• /
• 2004

JERS-1 L밴드 SAR 위성에서 얻어진 25개의 레이더간섭도를 이용하여 1992년 11월 5일부터 1998년 10월 1일 사이 경상북도 문경시 가은읍 폐탄광 일대의 지반 침하량을 측정하였다. SAR 영상에서 긴밀도가 높은 고정 산란체(PS: permanent scatterer)를 이용한 시계열 분석을 통해서 지반침하를 계산하였고, 현장조사된 균열등급 분포도와 비교하였다. 고정된 산란체는 1차적으로 진폭값과 간섭쌍의 긴밀도 영상을 이용하여 계산하였는데, 산악지역에 비해 도심지역에서 우세하게 선정되었다. 계산된 변위량은 붕락과 같은 급격한 비선형의 변위는 제외되고, 영상 획득 기간 내의 평균 변위량이다. 연구지역 내 계산된 주시방향으로의 평균 지표면 변위속도는 0.19cm/yr이고, 추정오차는 0.18cm/yr이다. 그리고 옛 가은 본갱의 중심부와 가은역 맞은편 일대에서 관측된 침하량은 0.49cm/yr, 1.66cm/yr로 연구지역에서 가장 뚜렷한 침하 양상을 보였다.

• 한국소음진동공학회논문집
• /
• 제23권10호
• /
• pp.920-927
• /
• 2013

The requirement of acoustic performance about underwater acoustic material which is used in underwater environment more increases. Underwater acoustic material was made by viscoelastic material such as a rubber and a polyurethane etc. In order to increase an acoustic performance, several kinds of inclusions were added to viscoelastic material. In this paper, acoustic modelling and analysis techniques were introduced and the acoustic characteristics of underwater acoustic material were studied. Echo reduction and transmission loss were calculated with volume fraction of inclusion in the material. Also the characteristic impedance and the input impedance of underwater acoustic material were obtained and effects on the echo reduction and transmission loss of material were discussed.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 1996년도 추계학술발표회 발표논문집
• /
• pp.103-109
• /
• 1996

무한 산란체나 해석적 해가없는 구조에 대해 회절계수를 구하기 위해 사용되어지는 GTD-MM 혼합기법은 회절전류에 대한 사전 지식이 요구되며 모멘트법 해석영역 범위와 GTD 해석영역에서의 정합점의 결정이 산란해의 정확도에 큰 영향을 미침에도 불구하고 경험적 결정에 의존하고 있는 등 많은 문제점들이 있다. 본고에서는 이러한 문제점을 살펴보고 그 해결방안을 모색하였다.

• 전자공학회논문지A
• /
• 제32A권2호
• /
• pp.31-37
• /
• 1995

A ray-based approach is developed to calculate the scattering from inhomogeneous dielectric objects. This approach is a natural extension of the "shooting and bouncing ray(SBR)" technique developed earlier for calculating the radar cross section of cavity structures and complex targets. In this formulation, a dense grid of rays representing the incident field is shot toward the scatterer. The curved trajectory, amplitude, phase and polarization of the ray fields inside the inhomogeneous object are computed numerically based on the laws of geometrical optics. The contributions of the exting rays to the exterior scattered field are then calculated by using the equivalence principle in conjunction with " a ray-tube integration" scheme. The ray-based approach is applied for the effect of an arcjet plasma plume on satellite reflector performance and backscattering from inhomogeneous objects.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1966-1970
• /
• 1991

The self-mixing type semiconductor laser Doppler velocimeter(SM-LDV) is applied to measure two simultaneously moving targets with different velocities in the same direction as a prototype target for multiscatterers. The measured beat waveform is found to be a composite wave of each beat waveform measured fran each of only moving target. In the composite waveform, each one-cycle wave has a feature of the sawtooth wave. This fact shows a possibility to discriminate the flow direction of fluid containing multiscatterers with distributed velocities by cooperating an improved version of the direction discrimination circuit already devised by the authors.

• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.605-615
• /
• 2003

In practice, it is common to manufacture reference blocks containing simple reflectors to obtain distance-amplitude correction (DAC) curves. However, the construction or DAC curves in this manner requires the use of a large number of specimens with appropriate curvatures and reference reflectors located at various depths. Therefore, less costly and quantitative procedures are strongly needed. To address such a need, in this study, we have developed model-based transfer curves to relate a DAC curve obtained in a particular reference configuration with that for a completely different configuration. An example of transferring DAC curves, using the proposed transfer curves, is given.

• 소음진동
• /
• 제10권2호
• /
• pp.319-324
• /
• 2000

This paper shows hot to model the submerged elastic structures and adequate analysis tools for modal behavior when using finite element and boundary element method. Four different cases are reviewed depending on the location of the water and air. First case is that structures are filled with air and water is located outside. Second case is opposite to case one. These cases are solved by direct approach using collocation procedure. Third case is that water is located both sides of structures. Last case is that air is located both sides. These cases are solved by indirect approach using variational procedure. As analysis tools harmonic frequency sweep analysis and eigenvalue iteration method are selected to obtain the natural frequencies of vibrating submerged structures depending on the cases. Results are compared with closed form solutions of submerged spherical shell.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.498-501
• /
• 2006

When an object or objects, rigid or flexible, presents in incident sound field, the sound wave is scattered. This, we call, is scattered sound field. It, of course, depends on the amplitude and the direction of the incident sound field as well as the geometry and the surface impedance of the scatterer(object). This paper addresses the way to measure scattered sound field by using arbitrary incident sound wave. This means that the method can decompose the scattered field from measured sound field with respect to any magnitudes and directions of incident plane-waves.

• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.16-21
• /
• 2013

This study presents the angular effects of virtual vertices inserted for effective treatment of the boundary edge laid on an infinite conducting surface in a half-space scattering problem. We investigated the angular effects of virtual vertices by first computing the radar cross section (RCS) of a specific scatterer; i.e., a tilted conducting plate in contact with the ground surface, by inserting the virtual vertex in half-space. Here, the electric field integral equation is used to solve this problem with various virtual vertex angles (${\theta}_{\nu}$) and conducting plate inclination angles (${\theta}_r$) ranging from $0^{\circ}$ to $180^{\circ}$. The effects of the angles ${\theta}_{\nu}$ and ${\theta}_r$ on the RCS computation are clearly shown with numerical results with and without the virtual vertices in free- and half-spaces.