• 한국음향학회지
• /
• 제27권3호
• /
• pp.129-139
• /
• 2008

본 논문의 목적은 탄성판 내에서 진행하는 기본형 램파 모드인 $S_0,\;A_0$ 모드가 사각형 노치에 의해 산란되었을 때, 노치의 2차원 형상에 따른 각 파의 반사계수와 투과계수를 구하는데 있다. 먼저 노치가 있는 부분의 평판의 두께 변화에 따라 노치 부위에 발생 가능한 램파모드의 변화를 고찰하고, 노치 부위의 경계면 형상과 노치 내부에서 진행하는 입사파의 방향에 따라, 노치에 의한 전체 산란 현상을 3가지의 독립된 산란 프로세스로 구분하였다. 그리고 각 프로세스의 경계면에 자유 경계조건과 연속조건을 적용하여 각 프로세스에서 발생된 산란파의 투과 및 반사 계수를 구하였다. 나아가 중첩의 원리를 이용하여 각 프로세스의 산란파를 모드별로 합산하고, 사각형 노치의 폭과 깊이의 변화에 따른 입력파의 에너지 플럭스의 합과 반사 및 투과파의 에너지 플럭스의 합의 차이가 최대 4%에 들도록 하는 정상상태에서의 반사 및 투과계수를 구하고 분석하였다.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.85-93
• /
• 1996

The far-zone scattered field patterns of a hyperbolic reflector antenna are analyzed by using uniform geometrical theory of diffraction(UTD). The main objective of this paper is to obtain the higher order diffraction contributions which provide the continuity over the shadow boundaries of the first order solution. to obtain the scattered magnetic field characteristics, the scattered field components of the secodn-order diffraction, diffraction-reflection, diffraction-reflection-diffraction terms are added to the result of the previous research. The results of the present research are compared to those of the first order solution and the method of moments. One can observe the improvemtn of the current approach over the first order solution. also, the results of the present method agree very well with those of the moment methods especially in the transition regions near the first order diffraction shadow boundaries.

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.37-47
• /
• 1996

An ultrasonic testing uses the directivity of the ultrasonic wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of ultrasonic wave is related to determination of testing sensitivity, scanning pitch and defect location. This paper investigated the directivity of ultrasonic wave, which scattered from slit defect located in heat-affected zone (HAZ) in butt joint using visualization method. The directivity of shear waves scattered from slit defect were different according to probe direction (far defect, near defect) and probe position (forward movement, maximum echo position, backward movement). The difference of directivity of reflection wave was existed between 2 MHz and 4 MHz angle probes. In the case of 2 MHz angle probe, the directivity of reflection wave was appeared sharp form because of the relation wave length and defect size.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.317-320
• /
• 2013

We studied the polarization state in an apertureless scanning near-field microscopy (a-SNOM) operating in reflection mode by using three-dimensional Finite-difference Time-domain (FDTD) method. As a result, the electric field around tip apex in the near-field region enhanced four times stronger than the incident light for ppolarization when the tip-sample separation was 10 nm. We find that the p- and s-polarization state is maintained for the scattered light when the probe is perpendicular to the sample. When the probe is not perpendicular to the sample, the polarization state of scattered light will rotate an angle that equals to the inclination angle of probe with p-polarization illumination. On the other hand, the polarization state will not rotate with s-polarization illumination.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1512-1518
• /
• 2018

The problem of scalar wave scattering by a sphere on or near a planar substrate is analytically solved. The solution is a set of wave functions coming in the form of infinite series of spherical and plane waves. In air, the incident plane wave is either scattered by the sphere or reflected from the substrate. A part of these scattered or reflected waves propagate to the other object where it is reflected and scattered again. Such processes of scattering and reflection repeat in turn indefinitely to generate multiply scattered waves, which are represented in the corresponding terms in the infinite series. The term in the series can be arranged in a recognizable manner to explicitly reveal the involved process and the multiplicity of scattering.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1143-1148
• /
• 2002

This paper analyses the transient response of a spherical elastic shell located near fee surface and impinged by spherical step-exponential acoustic shock waves. The problem is solved through extension of a method (Huang, 1969) previously formulated for the excitation in an infinite domain, which employs the classical separation of variables, series solutions, and Laplace transform technique The effect of the free surface reflection is taken into account using the image source method. The reflection of the incident wave has been treated by the same image formulation. If the reflection of the pressure field scattered and radiated by the shell is considered, the problem becomes that of multiple scattering by two spheres. However, this is in general negligible considering errors inherent from other sources and that the scattered and radiated pressure waves emanating from the shell are small. Thus, the problem is reduced to that of a structure immersed in an infinite fluid and impinged upon the origin and the image incident.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.163-172
• /
• 2000

In this study, the scattered far-field due to a cavity embedded in infinite media subjected to the incident SH-wave was calculated by the boundary element method. The effects of cavity shape and distance between internal cavity and internal point in infinite media were considered. The scattered far-field of the frequency domain was transformed into the signal of the time domain by using the Inverse Fast Fourier Transform(IFFT). It was found that the amplitude of scattered signal in time domain decreased with the increase of the distance between the detecting points of ultrasonic scattered field and the center of internal cavity in media. In addition, the time delay was clearly found in time domain waveform as the distance between the detecting points of ultrasonic scattered field and the center of internal cavity was gradually increased.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.94-101
• /
• 2004

From the Beckmann's reflection model of wave incident, reflected light from a surface is known to have not only specular but also diffuse components. The specular component dominant a surface for a mirror-like surface is distributed on the almost the same area as the spot on the surface, but the diffuse component region dominant f3r a rough surface spreads scattered on the larger areas than the spot. Therefore, statistic parameters from the scattered light distribution are more meaningful in the diffuse region, while the magnitude of rather meaning in the specular region. In usual, there need two sensors to acquire two kinds of information: Photo-detector for light intensity magnitude and image sensor for light intensity distribution. But dual sensor scheme requires a beam splitter usually to feed light to each sensor, and moreover there is not a combination rule to relieve the different sensor characteristics. In this study a new method is proposed for acquisition of the dual information using only an image sensor. Specular region is established on an image area being distinguished from a diffuse component, and laser power is adjusted so that no pixel of the image sensor in the specular region is saturated. Simulation based on the light reflection theory and the experimental results are quite well matched, and thus the proposed method was proved to be very useful for mirror-like surface measurement.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.1-8
• /
• 2016

In this paper, we evaluated the effect of a silica-based Anti-Reflection(AR) coating for PV modules. The coating technique can be easily applied to large-scale PV modules at room temperature with improvements of the optical properties that is qualified by the optical transmission measurements on the coated cover glass of the modules. The power improvement of the large-scale PV modules shows the increasing about 2.4% at standard condition of the coating technique on average. To improve the AR coating effect of the PV modules, we have characterized the individual PV modules by the measurements of DC power output, modified performance ratio(PRm) and the regression. The results show that the significant improvements of the AR coating effect are 6.4%, 5.5% and 4.5% of increasing of the performances by using the measurements of DC power output, modified performance ratio(PRm) and the regression, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.500-505
• /
• 2011

본 논문에서는 콜리메이터를 이용한 투과형과 반사형의 마이크로 광학형 누수감지 센서 시스템을 제안하고 실험하였다. 센서는 빛을 송신하고 수신하는 두 개의 콜리메이터가 10 mm 정도 떨어져서 마주보는 형태로 구현되어졌다. 센서가 공기 중에 노출된 경우 송신 콜리메이터에 나온 빛은 공기를 투과하여 수신 콜리메이터로 전송되어 일정한 출력 광 전력을 유지한다. 그러나 액체속에서는 송신된 빛이 산란되어 수신단으로 전달되지 못하므로 침수를 감지한다. 반사형의 경우 광섬유형 격자를 센서 끝단에 설치함으로서 센서에서 반응한 광 출력 정보가 입력단으로 다시 되돌아 올 수 있게 하여 시스템의 모니터링 구조를 단순화 하였다. 또한 두 시스템의 동작 특성을 비교하여 제시하였다.