• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.11
• /
• pp.979-981
• /
• 2013

In this paper, this study is aimed how to estimate the position of scattered pilot to be used to estimate channel in the OFDM System. The proposed method is possible to estimate the accurate position of scattered pilot to remove the phase error through cross-correlation between received signal and 4 symbol delay received signal.

• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.235-240
• /
• 2011

The scattered pilots employed in DVB-T take advantage of the merits of both the block type and comb type pilot arrangement to increase the transmission efficiency. To estimate the channel transfer functions for data subcarriers, it is required to conduct time-frequency domain 2D estimation using the pilots. Though 2D Wiener estimator is optimal in sense of MSE (mean square error), it is too complex to implement in hardware. In this paper a new channel estimation method for the scattered pilot based OFDM system by measuring the power of AWGN and removing the noise in the LS (least square) estimate of the channel is proposed. And the simulation results reveal the proposed method outperforms the 2D linear interpolation in the fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1081-1091
• /
• 2005

Unlike conventional DVB-T transmission with the streaming method, DVB-H system based on the IPDC(IP Data Casting) method uses Time-slicing scheme to achieve the maximization of portability by reducing the power consumption of a receiver. To enhance the power efficiency of the receiver, Time-slicing scheme controls the receiver operation to perform only for corresponding burst in specific time slot. The additional power saving can also be achieved by reducing the required time for synchronization. In this paper, we propose a fast scattered pilot synchronization algorithm, which detects the pilot pattern of currently received OFDM symbol. The proposed scheme is based on the correlation between the adjacent subcarriers of potential scattered pilot position in two consecutively received OFDM symbols. Therefore, it can reduce the time for the scattered pilot synchronization within two symbols as com-pared with the conventional method used for DVB-T. And the proposed algorithm has better performance than the two schemes proposed by Nokia for DVB-H and the method using correlation with reference signal. Extensive com-puter simulation is performed based on ETSI EN300 744 ETSI and performance results show that the proposed algorithm has more efficient and stable operation than the conventional schemes.

• Journal of Broadcast Engineering
• /
• v.10 no.2
• /
• pp.174-181
• /
• 2005

In this paper, we proposed new fast scattered pilot synchronization techniques to reduce the burst synchronization time for the DVB-H receiving system with robustness. DVB-H terminals employ a TDM system called 'Time-Slicing' to reduce power consumption. In order to fully exploit the potential power reduction, the synchronization time for the DVB-H receiver must be very short. A typical DVB-T system uses the TPS Synchronization to determine the position of scattered pilots which are used for channel estimation, and it takes 68 OFDM symbol time. In this paper, several new fast scattered pilot synchronization techniques are proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.554-561
• /
• 2010

This paper proposes an integer frequency offset estimation scheme robust to timing offset for the orthogonal frequency division multiplexing (OFDM)-based cognitive radio (CR) systems. The proposed scheme exploits a feature that a sample distance between a continual pilot and a scattered pilot nearest to it in an OFDM symbol belongs to one of predetermined distances. First after calculating a correlation value of every continual pilot and its nearest scattered pilot. Then, it is divided into several groups according to the sample distances. Since correlation values with the same sample distance undergo the same effect of the timing offset, the effect of the timing offset can be removed by re-correlating these correlation values. From the simulation results we can confirm that the proposed algorithm estimates the integer frequency offset with the robustness to the timing offset when compared to a conventional scheme.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.552-561
• /
• 2016

In OFDM system, frequency-domain sub-carriers of a symbol generally consist of data sub-carriers and scattered pilot sub-carriers and in the receiver, channel is estimated through time-axis interpolating pilot sub-carriers of several OFDM symbols. However, time-axis interpolation fails to keep track of rapid channel variation caused by fast moving receiver. Although symbol by symbol channel estimation without time-axis interpolation enables fast estimation, the performance is severely degraded for a long delay spread channel in a single frequency networks (SFNs) because of insufficient pilot sub-carriers. In this paper, a channel estimation scheme for OFDM receiver in a fast mobile SFN channel is proposed. The proposed scheme is applied to DVB-T receiver to improve the Doppler mobile performance in SFN channel.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.927-934
• /
• 2013

This paper aims to realize a Signal to Noise Ratio Estimator which constitutes a critical index of the broadcasting system in OFDM system with a synchronized type based on ISDB-T system. Of the elements which are comprising OFDM segments of ISDB-T system using the MSE algorithm suitable for ASIC design owing to its low complexity among a diverse SNR estimation methods, SNR estimation method using the broadcasting information data and the SNR estimation method using scattered pilot signal were realized by RTL. These two methods were compared in terms of their performance through simulation test not only in the AWGN channel which is an ideal channel, but also in SFN channel and frequency selective fading channel, which are distorted channels. Complexity of two methods were also compared through RTL realization. As a result of this comparison analysis, it was concluded that the SNR estimation method using scattered pilot signal shows more excellent performance and easiness in realization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.247-252
• /
• 2005

This paper proposed M-ary QAM OFDM system for efficiently transmission in multipath fading environment. And, this system have analyzed reception performance by occurred synchronization error to frequency offset in presence of multipath fading. As a result, it confirmed justification by simulation and BER theory of 64QAM OFDM of SP frame structure for the digital broadcasting.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.302-305
• /
• 2009

This paper examines the effect of nitride formation on formability for Cu bearing high strength extra low carbon (ELC) steel sheets. For this purpose, we have investigated the effect of addition of aluminium (Al) and boron (B) on texture and precipitation behavior of the ELC steel during continuous annealing. Mechanical properties and microstructures of the ELC steel sheets were analyzed as well using uni-axial tensile test, electron back-scattered diffraction (EBSD) technique and transmission electron microscopy (TEM) following pilot rolling and continuous annealing. It has been found that the addition of Al and B increases the precipitation of AlN and BN. What is more, the scavange of solute nitrogen is effective in increasing the formability of the ELC steels. In addition, the Al and B addition improves the aging property of the ELC steel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1276-1284
• /
• 1999

We have evaluated the BER's and CLP's of Wireless ATM (WATM) cells employing the concatenated FEC code with pilot symbols for fading compensation through the simulation in indoor wireless channel modeled as a Rayleigh and a Rician fading channel, respectively. The results of the performance evaluation are compared with those obtained by employing the convolutional code in the same condition. In Rayleigh fading channel, considering the maximum tolerance BER ( $10^-3$) as a criterion of the voice service, it is blown that the performance improvement of about 4 dB is obtained in terms of $E_b/N_o$ by employing the concatenated FEC code with pilot symbols rather than the convolutional code with pilot symbols.When the values of K parameter which means the ratio of the direct signal to scattered signal power in Rician fading channel are 6 and 10, it is shown that the performance improvement of about 4 dB and 2 dB is obtained, respectively, in terms of $E_b/N_o$ by employing the concatenated FEC code with pilot symbols considering the maximum tolerance BER of the voice service. Also in Rician fading channel of K=6 and K= 10, considering CLP = $10^-3$ as a criterion, it is observed that the performance improvement of about 3.5 dB and1.5 dB is obtained, respectively, in terms of $E_b/N_o$ by employing the concatenated FEC code with pilot symbols.