• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.778-783
• /
• 2015

We studied about the strength characteristics of the FRP bonding method due to reduce accident on the oceans and protect life for my people. We test tension and bending strength of butt joint, lap joint, V-scarf joint, X-scarf joint. The result of test, it's pattern is similar both tension and bending strength. Tension strength and bending strength was excellent in order to X-scarf-butt joint-V-scarf-lap joint. The tension strength is the best properties X-scarf showed a 57% strength rate of the basic material, and bending strength showed a 77% strength rate of the basic material. Overall, the X-scarf 12t joint has most excellent properties of tension and bending strength. The lap joint has worst properties of tension and bending strength. We have to test having different over-lay of V-scarf and X-scarf joint each 12t, 16t, 20t. V-scarf of 20t over-lay has excellent character of tension and bending strength. But X-scarf of 12t over-lay has excellent character of tension and bending strength. The results are shown to the contrary. The ship is received a lot of stress. it's hard to compare a direction both actual and test. But we can acknowledge material basic characteristic of strength through tension and bending test. We give the four repair method; butt joint, lap joint, V-scarf joint, X-scarf joint and the reduced ratio in comparison with basic material; In addition give the separated data for V-scarf and X-scarf characteristic of 12t, 16t, 20t overlay length. For our study repair man can select good repair method in his work station.

• Advances in aircraft and spacecraft science
• /
• v.5 no.3
• /
• pp.401-410
• /
• 2018

The aim of this work is to optimize the geometrical parameters as the adhesive thickness and the beveled angle to reduce the edge effect of the scarf and V bounded joint. A finite element analysis is done to define the generated stresses in the bounded joint. The geometrical optimum is obtained using the Experimental Design Method. Results show that the double scarf (V) joint is better than the simple scarf bounded joint.

• Composites Research
• /
• v.32 no.1
• /
• pp.37-44
• /
• 2019

The reinforcement effect of micro-bolt for a bonded scarf joint was investigated. Three scarf ratios of 1/10, 1/20, and 1/30 were considered to examine the effect of scarf patch configuration on joint strength. To maintain the same density of micro-bolt, 16, 32, and 48 bolts were installed in the scarf joint specimens with scarf ratios of 1/10, 1/20, and 1/30, respectively. Tests were also carried out on the joints that are bonded with only adhesive and that are fastened with only micro-bolts to obtain reference values. The average failure loads of the adhesive joints with scarf ratios of 1/10, 1/20, and 1/30 were 29.7, 39.6, and 44.8 kN, respectively. In case of micro-bolt reinforcement, the failure loads at the same scarf ratios were 28.4, 37.2, and 40.1 kN, respectively, which corresponds to 96, 94, and 90% of the pure adhesive joint failure loads. In the case of using only micro-bolts, the failure loads were only 13-25% of the average failure loads of pure adhesive joints. Fatigue test was also conducted for the joints with scarf ratio of 1/10. The results show that the fatigue strength of hybrid joints using both adhesive and microbolts together slightly increased compared to the fatigue strength of adhesive joint, but the rate of increase was small to 2-3%. Through this study, it was confirmed that the reinforcement effect of micro-bolt is negligible in the scarf joints where shear stress is dominating the failure, unlike in the structure where peel stress is dominant.

• Journal of Korean Foot and Ankle Society
• /
• v.20 no.4
• /
• pp.152-157
• /
• 2016

Purpose: To evaluate the effect of shortening scarf osteotomy on pain relief and range of motion (ROM) of the first metatarsophalangeal joint in hallux rigidus patients. Materials and Methods: Twenty-three cases of 19 patients who had been treated with shortening scarf osteotomy for the hallux rigidus between January 2007 and December 2013 were reviewed. The mean follow-up period was 21.4 months, and the mean age was 59.2 years. The first metatarsal bone was shortened until the ROM of the first metatarsophalangeal joint was greater than $80^{\circ}$ or $40^{\circ}$ of dorsiflexion. The length shortened by scarf osteotomy was measured. The authors also measured and compared the joint interval difference of the standing foot using an anteroposterior radiography. Moreover, the difference of ROM of the first metatarsophalangeal joint between the preoperative and final follow-up periods was also compared. The clinical results were evaluated and compared using the American Orthopaedic Foot and Ankle Society (AOFAS) scoring system and visual analogue scale (VAS) score. Results: The mean shortening length was about 6.5 mm (range, 4~9 mm). The joint space has been increased to 1.8 mm, and the ROM of the first metatarsophalangeal joint has also been increased to $18.4^{\circ}$ after the operation. In three cases, the postoperative ROM has been decreased to less $10^{\circ}$. The AOFAS score has been improved from 41.7 (range, 32~55) to 86.2 (range, 65~95), and the VAS score was also decreased from 3.7 (range, 3~5) to 1.3 (range, 0~3). Two cases have shown no decrease in pain even after the operation. Conclusion: Shortening scarf osteotomy was found to decrease joint pain by decompressing the pressure of the first metatarsophalangeal joint. This osteotomy also helped improve the ROM of the first metatarsophalangeal joint. Shortening scarf osteotomy can be considered one of the effective methods for joint preservation.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.3
• /
• pp.93-97
• /
• 2017

Purpose: The aim of this study was to evaluate the radiological and clinical outcomes of scarf osteotomy for hallux valgus (HV) deformity in elderly patient with osteoporosis. Materials and Methods: A total of 58 elderly patients (mean age, 72.6 years) underwent scarf osteotomy for HV deformity between 2008 and 2015. The mean follow-up period was 24.4 months. Of the 58 patients, 42 were diagnosed with osteoporosis and 16 were diagnosed as normal. The radiological and clinical outcomes were assessed preoperatively, postoperatively, and at final follow-up, including HV angle, intermetatarsal (IM) angle, American Orthopaedic Foot and Ankle Society (AOFAS) score, patient satisfaction, visual analogue scale (VAS), and complication. Results: There was no significant difference in HV angle and IM angle between the osteoporosis group and normal bone mineral densitometry group at all time points, preoperative, postoperative, and final follow-up. Moreover, there was no statistically significant difference between the two groups with respect to the AOFAS score and VAS evaluations. In the osteoporosis group, the mean HV angle improved from $36.7^{\circ}$ preoperatively to $11.3^{\circ}$ at the time of final follow-up, and the mean IM angle improved from $13.2^{\circ}$ to $5.7^{\circ}$. The mean AOFAS score improved from 52.6 preoperatively to 89.1 at the time of final follow-up. With respect to satisfaction, 83.4% of patients were very satisfied or satisfied. There were no serious complications, and all cases showed complete union at the osteotomy site. Conclusion: We believed that scarf osteotomy is a safe, effective procedure for the correction of elderly patients with osteoporosis.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.293-303
• /
• 2005

Bonded dissimilar materials are being increasingly used in automobiles, aircraft, rolling stocks, electronic devices and engineering structures. Bonded dissimilar materials have several material advantages over homogeneous materials such as high strength, high reliability, light weight and vibration reduction. Due to their increased use it is necessary to understand how these materials behave under stress conditions. One important area is the analysis of the stress intensity factors for interface cracks emanating from circular holes in bonded dissimilar materials. In this study, the bonded scarf joint is selected for analysis using a model which has comprehensive mixed-mode components. The stress intensity factors were determined by using the boundary element method (BEM) on the interface cracks. Variations of scarf angles and crack lengths emanating from a centered circular hole and an edged semicircular hole in the Al/Epoxy bonded scarf joints of dissimilar materials are computed. From these results, the stress intensity factor calculations are verified. In addition, the relationship between scarf angle variation and the effect by crack length and holes are discussed.

• Journal of the Korea Furniture Society
• /
• v.17 no.2
• /
• pp.25-34
• /
• 2006

This experiment was carried out to investigate the high-frequency gluing characteristics of poly vinyl acetate emulsion adhesive(PVAc) on MDF edge-glued boards. The edge-glued boards were glued lengthwise with butt, scarf, or finger joint. The wastes of MDF boards were reused as board materials. The obtained results are summarized as follows; the bending strength of edge-glued MDF increased slightly with the HF heating time, but the economically desirable heating time was 6 minutes. The bending and tensile strength of edge-glued MDF were high with scarf, finger and butt joint, in order. The strength of finger jointed MDF showed 80% of scarf jointed MDF. The effects of location of finger joints on the bending strength of edge-glued MDF were larger than those of the numbers of finger joints. The bending strength of edge-glued MDF with one joint on the middle position showed 40% decrease in comparison with non-jointed MDF.

• Journal of Korean Foot and Ankle Society
• /
• v.22 no.4
• /
• pp.156-160
• /
• 2018

Purpose: Chronic tophaceous gout is a painful and disabling inflammatory disease. Surgical treatment for chronic tophaceous gout is very difficult with many complications. This study evaluated the efficacy of shortening scarf osteotomy on the treatment of chronic tophaceous gout in the 1st metatarso-phalangeal (MTP) joint. Materials and Methods: From January 2006 to December 2015, 14 patients (19 cases) who underwent axial shortening scarf osteotomy for chronic tophaceous gout were reviewed. All patients were male. The average age at the time of surgery was 59.6 years (42~66 years). The minimum follow-up was 24 months. Total removal of the tophi mass with the adhered medial capsule of the 1st MTP joint was attempted. Axial shortening scarf osteotomy was done on the 1st metatarsal shaft. The visual analogue scale (VAS) for pain and the American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score was assessed preoperatively and postoperatively. The range of motion (ROM) of the 1st MTP joint was also compared pre- and postoperatively. Results: The average size of the extracted tophaceous mass was 32 mm. The mean amount of the length of metatarsal shortening was 4.9 mm. The mean ROM of the 1st MTP joint was improved from $30.4^{\circ}$ to $62.3^{\circ}$. The mean AOFAS forefoot score improved from 51.4 to 86.6 points. The mean VAS for pain improved from 4.6 to 0.3 points. Conclusion: The axial shortening scarf osteotomy used on chronic tophaceous gout could reconstruct the 1st MTP joint with an improved ROM and was free of pain. Axial shortening scarf osteotomy is suggested as a useful and effective method for the treatment of chronic tophaceous gout.

• Clinics in Orthopedic Surgery
• /
• v.10 no.4
• /
• pp.479-483
• /
• 2018

Background: We developed a modified proximal scarf osteotomy technique for moderate to severe hallux valgus in an attempt to obtain better correction of the deformity. In addition, we compared the clinical and radiographic results of this modified technique with those of the classic scarf osteotomy reported in other studies. Methods: Between December 2004 and July 2009, 44 cases of modified proximal scarf osteotomy was performed in 35 patients with moderate hallux valgus. The American Orthopedic Foot and Ankle Society (AOFAS) score, visual analogue scale (VAS) score, range of motion of the first metatarsophalangeal joint, and radiographic results were evaluated. Results: The mean hallux valgus angle and the mean first intermetatarsal angle improved from an average of $32.2^{\circ}$ and $14.3^{\circ}$, respectively, to an average of $12.5^{\circ}$ and $8.6^{\circ}$, respectively. The distal metatarsal articular angle improved from an average of $18.7^{\circ}$ to $12.4^{\circ}$. The preoperative mean AOFAS and VAS scores were 47 points and 7 points, respectively, which improved to 86 points and 1 point, respectively, at the final follow-up. Limited range of motion occurred in two cases postoperatively. The height of the first metatarsal-cuneiform joint, which was an average of 15.9 mm preoperatively, did not change. The first metatarsal-talus angle increased from an average of $4.1^{\circ}$ to $7.1^{\circ}$. Conclusions: The modified proximal scarf osteotomy for the treatment of moderate hallux valgus showed similar results with the classic scarf osteotomy with regard to changes in the first intermetatarsal angle and postoperative satisfaction. Therefore, we suggest the modified proximal scarf osteotomy be considered as well as other proximal osteotomy in the treatment of moderate to severe hallux valgus.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.4
• /
• pp.272-276
• /
• 2013

Purpose: Recurrence is one of the most common complications after primary correction for hallux valgus deformities. The purpose of this study was to evaluate the usefulness of Scarf osteotomy with axial decompression in the treatment of recurrent hallux valgus. Materials and Methods: From April 2006 to April 2011, 14 cases (12 patients) of recurrent hallux valgus were managed with shortening Scarf osteotomy. Preoperative and postoperative radiographs were reviewed for the measurement of the hallux valgus angle (HVA), intermetatarsal angle (IMA), and the amount of the $1^{st}$ metatarsal shortening. Clinical outcomes including the visual analogue scale (VAS), the AOFAS score, and the range of motion [ROM] of the 1st metatarsophalangeal (MTP) joint were evaluated. Results: The mean HVA decreased from 27.9 degrees to 5.2 and the mean IMA decreased from 12.9 to 3.4. The mean VAS improved from 5.3 to 0.3 and the mean AOFAS score improved from 41 to 90. The mean amount of the 1st metatarsal shortening was 3.4 mm (2-5). The mean ROM of the $1^{st}$ MTP joint improved from 22 degrees (15-35) to 68 (55-75). Conclusion: Scarf osteotomy associated with axial decompression can be a useful revision procedure for the treatment of recurrent hallux valgus deformity.